Manualer+

Beok BOT-R8W-WIFI

Beok Tuya Wifi Smart Termostat BOT-R8W-WIFI Brugermanual

Model: BOT-R8W-WIFI (also applicable to BOT-R5W)

Brand: Beok

1. Introduktion

The Beok Tuya Wifi Smart Thermostat is an intelligent temperature controller designed for gas-fired wall-hung boilers and heat pump systems. It regulates room temperature for comfort and energy savings by comparing the ambient temperature with your set temperature. This thermostat supports both battery and USB power options and can be controlled via the Tuya Smart/Smart Life app, as well as voice assistants like Alexa and Google Home.

2. Pakkens indhold

Markér venligst feltet for følgende elementer:

Contents of the Beok Smart Thermostat package including the thermostat, USB-C cable, 2 screws, and user manual.
Figur 2.1: Pakkens indhold
  1. Thermostat Unit
  2. USB-C kabel
  3. 2x monteringsskruer
  4. Brugermanual

3. Specifikationer

FeatureSpecifikation
MærkenavnBeok
ModelBOT-R8W-WIFI (BOT-R5W)
Strømforsyning3 x 1.5V AAA alkaline batteries or USB-C
BeskyttelsesniveauIP20
TemperatursensorNTC
Temperaturpræcision±0.5°C (adjustable)
Temperaturindstillingsområde5~60℃
Switch Deviation (Hysteresis)0.5~10℃ (Factory setting: 0.5℃)
Belastningsstrøm3A (resistiv)
Selvforbrug StrømLess than 170 μΑ
WIFI -forbindelse2.4G
CertificeringCE

4. Opsætning og installation

4.1 Strømforsyningsmuligheder

Comparison of battery and USB-C power supply for the thermostat. Battery power dims and turns off the screen after 5 seconds to save power. USB-C charging keeps the screen always on, with customizable vibration wake times.
Figure 4.1: Battery Powered vs. USB Powered
  • Batteristrøm: Uses 3x AAA batteries (not included). To save battery, the screen will dim and turn off after 5 seconds.
  • USB-C strøm: A USB port on the side allows for hassle-free wall mounting. With USB-C charging, the screen can remain always on. You can set vibration wake times in the app.

4.2 Ledningsdiagram

Vigtig: Due to the strong power design of some circuits, installation should be performed by qualified professionals. Most boilers are connected to COM and NO terminals, while a few are connected to COM and NC.

Detailed wiring diagram for the Beok thermostat showing NO, COM, and NC terminals for connection to a boiler. No AC power connection is required.
Figur 4.2: Ledningsdiagram
Wiring diagram showing the thermostat connected to a boiler via COM and NO terminals. It emphasizes simple installation with no AC power needed.
Figure 4.3: Boiler Wiring Example

4.3 Installationstrin

Diagram showing the dimensions of the thermostat (86mm x 86mm x 20mm) and the mounting plate with disassemblable wire pass-through holes and screw distances (60mm). It states that simple mounting with screws is optional for the installation box.
Figure 4.4: Thermostat Dimensions and Mounting
  1. Carefully pry away the display panel using a screwdriver.
  2. Place the backplate in the desired installation position on the wall. Mark the screw holes.
  3. Drill holes, insert expansion anchors (if needed), and secure the backplate with the provided screws. Ensure the backplate is firmly attached.
  4. Connect the wiring to the appropriate terminals (NO, COM, NC) on the backplate as per the wiring diagram for your heating system.
  5. Carefully align the display panel with the backplate and snap it into place. The installation is complete.

5. Betjeningsvejledning

LCD display of the Beok thermostat with labels pointing to various icons and their meanings: Time, Weekday, Wi-Fi connected, Room temperature, Battery level, Schedule, Child lock, Frost (on), Cooling mode, Heating mode, Output, Auto mode, Manual mode, Set temperature, Power on/off, Manual/auto switch, Adjustment keys.
Figure 5.1: LCD Display and Icon Explanation

5.1 Grundlæggende knapfunktioner

  • Power ON/OFF Key (⑁): Press once to power on. Press again to power off and close all valves.
  • Mode Conversion Key (M): Press M to switch between working modes when powered on. The LCD shows Ⓜ for manual mode and Ⓐ for automatic mode.
  • Adjustment Keys (▲ / ▼): Press ▲ or ▼ to adjust the set temperature and other parameters when powered on.

5.2 Advanced Device Option Settings

  1. When the device is on, click ▲ and ▼ to adjust the set temperature directly. If it's in automatic mode, it will switch to temporary mode.
  2. Power on the device and click the M button to toggle between manual and automatic modes.
  3. While the device is powered on, long-press the M button to enter the setting state. There are four setting states. Click ▲ and ▼ to select up and down, and short-press M to confirm after selection.

5.3 Varme- og køletilstande

Diagram illustrating heating and cooling modes. When connected to a boiler, only heating is available. When connected to an Air Source Heat Pump (ASHP), both heating and cooling can be selected.
Figure 5.2: Heating/Cooling Application
  • Kedeltilslutning: When the thermostat is connected to a gas boiler, it can only operate in heating mode.
  • Heat Pump Connection: When the thermostat is connected to an Air Source Heat Pump (ASHP), both heating and cooling modes can be selected.
  • To switch between heating/cooling settings: Short-press M to enter adjustment, then short-press ▲ and ▼ to switch.

5.4 Daily Programming

Screenshot of the 'Week Program' in the app, showing customizable schedules for all 7 days of the week with 6 periods per day. Example periods are shown with time and temperature settings.
Figure 5.3: Daily Programming Interface

You can set the temperature for 6 time periods every day, and these settings can be copied across days.

  • In daily programming mode, short press M to select and adjust Monday-Sunday data.
  • Then short-press ▲ and ▼ to adjust the 6 daily programming points (time and temperature).

5.5 Clock Adjustment

  • Short-press M to enter time and date adjustment.
  • Short-press M to switch options (e.g., hour, minute, day).
  • Use ▲ or ▼ to adjust the values.

5.6 Andre funktioner

Diagram showing additional thermostat functions: Child Lock, Frost Protection (only valid in Heating mode), and Temperature Hysteresis (Min. ±0.5 °C).
Figure 5.4: Other Functions
  • Børnelås funktion: When powered on, long-press ▲ and ▼ for 5 seconds. Once a lock icon appears on the right of the display, the keys are locked to prevent accidental changes.
  • Frostbeskyttelse: This function is only valid in heating mode and helps prevent pipes from freezing by maintaining a minimum temperature (e.g., 5°C).
  • Temperature Hysteresis: The minimum adjustable temperature hysteresis is ±0.5°C, which defines the temperature range around the setpoint before the heating/cooling system activates or deactivates.

6. App- og stemmestyring

6.1 App-fjernbetjening

Illustration of app remote control, showing a smartphone displaying the thermostat interface and controlling a thermostat in a house from a distance. Compatible with Smart Life / Tuya Smart apps.
Figur 6.1: App-fjernbetjening

The thermostat is compatible with the Tuya Smart or Smart Life applications, allowing you to control your heating/cooling system remotely.

6.2 Device Network Connection Settings

  1. Ensure the thermostat transmitting panel is on.
  2. Long-press the ▲ key for 5 seconds until the Wi-Fi icon on its display blinks slowly. The thermostat is now in connection mode.
  3. Åbn Tuya Smart/Smart Life-appen på din smartphone.
  4. In the small-appliance list within the app, find the (Bluetooth + Wi-Fi) thermostat.
  5. Under the specified setup, click "Confirm".
  6. Choose your 2.4GHz Wi-Fi network and enter its password. Click "Next".
  7. Follow the prompts to click "Go to Connect", click the indicated content (usually to connect to the device's temporary Wi-Fi hotspot), and then return to the Tuya app to complete the network setup.

6.3 Stemmekontrol

Illustration of voice control, showing the thermostat surrounded by smart speakers like Amazon Alexa, Google Home, and Yandex Alice. A woman is shown speaking the command 'Set the living room to 23 °C.'
Figur 6.2: Kompatibilitet med stemmestyring

The thermostat supports voice control through popular assistants such as Alexa, Google Home, and Yandex Alice. Once connected to your smart home ecosystem, you can use voice commands to adjust settings, for example: "Set the living room to 23 °C."

7. Vedligeholdelse

  • Keep the thermostat clean by wiping it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources, as this can affect temperature readings.
  • If using battery power, replace batteries promptly when the low battery indicator appears to ensure continuous operation.

8. Fejlfinding

FænomenBehandlingsmetode
Cannot turn on the thermostat
  1. Check whether the batteries are installed correctly (not upside down).
  2. Check if the power button is functional.
LCD shows garbled codeCheck if the rear shell installation is deformed. If so, loosen and reinstall it.
Display is normal but no output (heating/cooling not activating)
  1. Check whether the connection between the main control board and the power board is damaged.
  2. Check if the output wiring has an incorrect connection.
Error in temperature displayCalibrate the temperature display through the first calibration panel in the advanced options settings.

9. Brugertips

  • This thermostat is designed to accurately measure and control the temperature of the room where it is installed. Ensure it is placed in a central location away from direct heat sources or drafts for optimal performance.
  • For battery-powered operation, consider using high-quality alkaline batteries for longer life.
  • When setting up daily programming, remember that settings can be copied, which saves time if your schedule is similar across multiple days.

10. Garanti og support

For warranty information and technical support, please refer to the official Beok webwebstedet eller kontakt din forhandler. Gem din købsbevis i tilfælde af garantikrav.

En PDF-version af brugermanualen kan downloades: Download brugermanual (PDF)

Relaterede dokumenter - BOT-R8W-WIFI

Preview BOT-R5W/R8W Wi-Fi gaskedeltermostat manual
Denne manual indeholder instruktioner og specifikationer for BOT-R5W/R8W Wi-Fi-gaskedeltermostaten, der dækker dens anvendelse, elektriske specifikationer, opsætning, netværksforbindelse, ledningsføring, daglig programmering, installation og fejlfinding.
Preview Brugermanual til BOT-R5W/R8W termostat til gasfyr uden Wi-Fi
Brugermanual til BEOK BOT-R5W/R8W smart termostat uden Wi-Fi. Lær om installation, betjening, programmering, avancerede indstillinger og fejlfinding af gaskedler og varmesystemer.
Preview Beok BOT-seriens kedeltermostat - brugermanual og installationsvejledning
Omfattende brugermanual og installationsvejledning til Beok BOT-serien af ​​kedeltermostater, der dækker funktioner, tekniske parametre, betjening, ledningsføring, Wi-Fi-konfiguration og avancerede indstillinger.
Preview BOT-313WIFI Thermostat User Manual and Technical Specifications
Comprehensive guide to the Beok BOT-313WIFI Wi-Fi thermostat, covering installation, operation, technical parameters, app control, and smart home integration with Google Home and Alexa.
Preview Beok BOT-313 WIFI Smart Termostat Brugermanual og Installationsvejledning
Omfattende guide til Beok BOT-313 WIFI smart-termostaten, der dækker installation, opsætning, app-styring, Wi-Fi-forbindelse og smart home-integration med Google Home og Alexa.
Preview BEÖK BOT-313WIFI Smart Thermostat User Manual and Installation Guide
Comprehensive guide for the BEÖK BOT-313WIFI smart thermostat, covering installation, setup, user interface, smartphone app control, and integration with Google Home and Alexa.