ECHTPower Wireless Pro Controller User Manual

Indledning

Tak for købetasing the ECHTPower Wireless Pro Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller, ensuring an optimal gaming experience across multiple platforms including Nintendo Switch, iOS, Android, and PC. Please read this manual thoroughly before use and keep it for future reference.

Pakkens indhold

Kontroller venligst pakken for at sikre, at alle varer er til stede:

• Wireless Controller x 1
• Charging Cable (USB-C) x 1
• Brugsanvisning x 1

Specifikationer

Produktdiagram

Familiarize yourself with the layout of your ECHTPower Wireless Pro Controller:

Figur 1: Forside view of the ECHTPower Wireless Pro Controller.

Figur 2: Tilbage view of the controller with MR/ML buttons and switches.

Knaplayout:

• Front: Home, Turbo (+), Screen Capture (-), A/B/X/Y, Left Joystick/L3, Right Joystick/R3, D-pad, M Button.
• Top: R Button, L Button, Charging Indicator, Pairing Button, Type-C Charging Port, Channel LED.
• Bund: ZR Button, ZL Button, ML Button, MR Button, Vibration Switch, Light Switch Key.

Opsætning og tilslutning

Initial Activation & Power Management:

• Indledende brug: Before first use, the controller must be charged using the provided USB-C data cable to activate it. Connect the controller to a power source (e.g., Switch dock or AC adapter).
• Tænd: Press the Home button lightly.
• Sluk: Press the pairing button lightly.
• One-Tap Wake-Up: When connected to a Nintendo Switch, press the Home button to instantly wake your Switch from sleep mode.

Connection Methods for Various Devices:

The controller supports both wired and wireless connections across multiple platforms.

Note for Nintendo Switch Wired Connection: Ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Betjeningsvejledning

Turbo Rapid Fire Function:

Supported buttons: A, B, X, Y, L, R, ZL, ZR, D-pad.

• Manuel turbo: Hold the 'T' button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Automatisk turbo: Hold the 'T' button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Deaktiver Turbo: Hold the 'T' button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All Turbo Settings: Press and hold the 'T' button for 3 seconds to clear rapid fire settings for all buttons.
• Hastighedstilpasning: Rapid fire speed can be adjusted to fast, medium, or slow. The default is slow. Hold the 'T' button on the controller and simultaneously move the right joystick up or down to adjust the speed.

Macro Setting for Back Buttons (ML/MR):

Supported buttons for mapping: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-PAD.

• Gå ind i programmeringstilstand: Press and hold the 'M' button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: While in programming mode, press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press either the 'ML' or 'MR' button. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
• Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the 'M' button for 2 seconds and seeing the left and right 3D rings flash slowly, press 'ML' or 'MR' to clear the programmed back button settings.

Light Adjustment (RGB Lighting):

Customize the 9-color RGB lighting effects on your controller.

• Skiftemetoder: Press 'Light Key' + 'R3' to cycle between 3 modes: Steady, Breathing/Running Horse, and Rainbow.
• Farvejustering: Press 'Light Key' + 'L3'.
  • In Steady mode: Switch colors.
  • In Breathing/Running Horse mode: No effect.
  • In Rainbow mode: Pause the rainbow effect.
• Reset Lights to Default: Press the '+' and 'Turbo' buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset to their default settings.
• Turn On/Off Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.

Vibrationsjustering:

The controller features dual motors with adjustable vibration intensity.

• Juster intensitet: After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment.
• Intensitetsniveauer: Four intensity levels are available: 100% (Strong), 70% (Medium - default), 30% (Weak), and 0% (Off).
• Disable/Enable Vibration: Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function.

Batteristyring

Opladning:

• Connect the controller to an adapter using the provided USB-C data cable.
• The orange charging indicator will remain lit while charging.
• Once fully charged, the orange charging indicator will turn off.
• A full charge takes approximately 2.5 hours and provides 10-16 hours of usage time.

Indikator for lavt batteri:

When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.

Standbytilstand:

• Manual Standby: When the controller is powered on, short press the "Pairing" button to enter standby mode.
• Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
• Automatic Standby (Inactivity): When the controller is connected to a console but remains inactive for 15 minutes, it will automatically enter standby mode.

Opretholdelse

• Hold controlleren ren ved at tørre den af ​​med en blød, tør klud.
• Avoid exposing the controller to liquids, excessive dust, or extreme temperatures.
• Opbevar controlleren på et køligt, tørt sted, når den ikke er i brug.
• Do not attempt to disassemble or repair the controller yourself, as this may void the warranty and cause damage.

Fejlfinding

• Controller Malfunction/Unresponsive: If the controller malfunctions or becomes unresponsive, you can reset it by pressing and holding the "HOME" button for 10 seconds.
• Forbindelsesproblemer: Ensure the controller is fully charged. For wireless connections, verify the correct pairing combination for your device (refer to the "Connection Methods" table). For wired Switch connections, confirm "Pro Handle Wired Connection" is enabled in Switch settings.
• Drift Issues: The controller features Hall Effect Joysticks designed to prevent drift. If you experience any unusual input, try resetting the controller.
• Interference (FCC): If the equipment causes harmful interference to radio or television reception, try the following: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer/technician.

Brugertips

• Experiment with the different RGB lighting modes and colors to personalize your gaming setup.
• Utilize the programmable back buttons (ML/MR) for frequently used in-game actions or complex combos to gain a competitive edge.
• Adjust the vibration intensity to your preference for a more immersive or less distracting gaming experience.
• Remember to enable "Pro Handle Wired Connection" in your Nintendo Switch settings for optimal wired performance.

Sikkerhedsforanstaltninger

• Do not expose the controller to liquid.
• Adskil ikke controlleren.
• Avoid dropping the controller.
• Avoid exposing the controller to extremely high or low temperatures.
• Dispose of the product and rechargeable battery responsibly at an appropriate collection point for recycling, in accordance with local regulations. Do not dispose of with household waste.

Garanti & Support

This product comes with a 12-month warranty for worry-free gaming.

For technical support, warranty claims, or any inquiries, please contact ECHTPower customer service:

• E-mail: service@echtpower.com
• Webwebsted: www.echtpower.com
• Telefon: 0755-21010839

Producent: Shenzhen Mike Morgen Technology Co., Ltd.

Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen.

A detailed user manual in PDF format is also available for download on the manufacturer's webwebsted.

Lovgivningsmæssige oplysninger

Declaration of Conformity (CE):

Model: ES01

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

Den fulde tekst af EU-overensstemmelseserklæringen kan findes på: www.echtpower.com

UKCA-erklæring:

The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

Den fulde tekst af UKCA's overensstemmelseserklæring kan findes på: www.echtpower.com

FCC-erklæring:

Denne enhed overholder del 15 af FCC-reglerne. Betjening er underlagt følgende to betingelser: (1) Denne enhed må ikke forårsage skadelig interferens, og (2) Denne enhed skal acceptere enhver modtaget interferens, inklusive interferens, der kan forårsage uønsket drift.

FCC advarsel: Enhver ændring eller modifikation, der ikke udtrykkeligt er godkendt af den part, der er ansvarlig for overholdelse, kan annullere brugerens ret til at betjene udstyret.

Note: Dette udstyr er blevet testet og fundet i overensstemmelse med grænserne for en klasse B digital enhed i henhold til del 15 af FCC-reglerne. Disse grænser er designet til at give rimelig beskyttelse mod skadelig interferens i en boliginstallation. Dette udstyr genererer anvendelser og kan udstråle radiofrekvensenergi og kan, hvis det ikke installeres og bruges i overensstemmelse med instruktionerne, forårsage skadelig interferens på radiokommunikation. Der er dog ingen garanti for, at der ikke vil forekomme interferens i en bestemt installation. Hvis dette udstyr forårsager skadelig interferens på radio- eller tv-modtagelse, hvilket kan fastslås ved at slukke og tænde for udstyret, opfordres brugeren til at forsøge at korrigere interferensen ved hjælp af en eller flere af følgende foranstaltninger:

• Drej eller flyt modtagerantennen.
• Øg afstanden mellem udstyret og modtageren.
• Tilslut udstyret til en stikkontakt på et andet kredsløb end det, som modtageren er tilsluttet.
• Kontakt forhandleren eller en erfaren radio/tv-tekniker for at få hjælp.

Enheden er blevet vurderet til at opfylde generelle krav til RF-eksponering. Enheden kan bruges i bærbar eksponeringstilstand uden begrænsninger.

FCC ID: 2A88F-ES01