1. Introduktion
Thank you for choosing the METALFISH Flex 500/600W 80PLUS GOLD Full Modular Power Supply. This power supply unit (PSU) is designed to provide stable and efficient power for compact systems such as ITX Mini PCs, POS systems, NAS devices, and GPU Docks. Featuring 80 PLUS Gold certification, full modular cabling, and robust protection mechanisms, it ensures reliable performance for your hardware.
2. Sikkerhedsoplysninger
Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to equipment.
- Tag altid netledningen ud af stikkontakten, før du installerer, fjerner eller rengør strømforsyningen.
- Åbn ikke strømforsyningen casing. Høj volumentagDer er ingen dele indeni, som brugeren kan servicere. Åbning af casing vil ugyldiggøre garantien.
- Sørg for, at strømforsyningen er installeret i et godt ventileret område for at forhindre overophedning.
- Brug kun de modulære kabler, der følger med strømforsyningen. Brug af inkompatible kabler kan forårsage skade.
- This power supply is designed for use with computers and related components. Do not use it for any other purpose.
- Operate the power supply within the specified input voltage range (90~264V).
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- METALFISH Flex 500/600W Power Supply Unit
- Modulært kabelsæt (som beskrevet nedenfor)
- Power Cord (EU Plug)
- Monteringsskruer
Modular Cable Types and Lengths:
- Bundkort strøm: 1x 24Pin (350mm)
- PCIe-strøm: 1x 8Pin (6+2Pin)*4 (350mm + 150mm)
- CPU Power: 1x 8Pin (4+4Pin)*2 (450mm + 150mm)
- SATA/MOLEX: 1x SATA*2 + IDE*1 (350mm + 120mm + 120mm)
4. Installationsvejledning
Follow these steps to install your METALFISH Flex Power Supply:
- Forbered dit system: Sørg for, at din computer er helt slukket og taget stikket ud af stikkontakten.
- Monter strømforsyningen: Install the power supply into the designated Flex-ATX or 1U PSU bay in your chassis using the provided mounting screws.
- Tilslut strøm til bundkortet: Connect the 24-pin ATX cable to your motherboard's 24-pin power connector.
- Tilslut CPU-strøm: Connect the 4+4-pin CPU power cable to your motherboard's CPU power connector.
- Connect GPU Power (if applicable): If your graphics card requires external power, connect the appropriate 6+2-pin PCIe power cables.
- Tilslut ydre enheder: Connect SATA power cables to your storage drives (HDDs/SSDs) and MOLEX cables to any other peripherals requiring them.
- Kabelstyring: Utilize the flat, embossed modular cables for easier routing and improved airflow within your compact system.
- Sikre forbindelser: Double-check all connections to ensure they are firmly seated.
- Tænd: Plug the power cord into the PSU and then into a wall outlet. Turn on your computer.
PSU Quick Test (Before Installation)
To verify the power supply is functioning correctly before connecting it to your system:
- Forbered et stykke ståltråd eller en papirclips.
- Insert the wire into pins 3 and 4 of the 24-pin ATX connector. Ensure the 24P connector clips are facing upward for correct pin identification.
- Plug in the power cord to the PSU and then to a wall outlet.
- If the PSU fan spins normally, it indicates the power supply can be powered on and started up properly.
5. Betjeningsvejledning
The METALFISH Flex Power Supply operates automatically once installed and connected. It provides stable DC power to your computer components. No specific user interaction is required during normal operation.
- Tænd/sluk: The PSU will power on and off with your computer system.
- Ventilatorbetjening: The integrated PWM fan will adjust its speed based on the PSU's temperature to maintain optimal cooling and minimize noise.
- Input bindtage: The PSU supports a wide input voltage range of 90~264V AC, automatically adapting to different regional power standards (50Hz/60Hz).
6. Vedligeholdelse
Korrekt vedligeholdelse sikrer strømforsyningens levetid og optimale ydeevne.
- Rensning: Periodically clean the exterior of the power supply and its fan grill using a soft, dry cloth. For deeper cleaning, use compressed air to remove dust from the fan and vents. Always disconnect the power supply from the wall outlet before cleaning.
- Ventilation: Ensure that the air intake and exhaust vents of the power supply are not obstructed. Maintain adequate airflow around the PSU within your chassis.
- Kabelintegritet: Regularly check modular cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.
7. Fejlfinding
Hvis du støder på problemer med din strømforsyning, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Systemet tænder ikke. | Loose power connections, faulty power outlet, PSU switch off, faulty PSU. | Check all power cable connections (wall, PSU, motherboard, components). Ensure the PSU switch is ON. Test the power outlet. Perform the PSU Quick Test. |
| System powers on but immediately shuts down. | Overload, short circuit, overheating, faulty component. | Verify total power draw does not exceed PSU capacity. Check for short circuits (e.g., loose screws). Ensure proper ventilation. Disconnect non-essential components to isolate the issue. |
| Usædvanlige lyde fra strømforsyningen. | Dust in fan, faulty fan bearing, coil whine. | Clean the fan with compressed air. If noise persists and is excessive, contact support. Coil whine is generally harmless but can be annoying. |
| Peripherals (e.g., drives) not receiving power. | Loose or incorrect modular cable connection. | Ensure SATA/MOLEX cables are correctly and firmly connected to both the PSU and the peripheral. |
If troubleshooting steps do not resolve the issue, please contact METALFISH customer support.
8. Specifikationer
The METALFISH Flex Power Supply is available in 500W and 600W variants. The BLACK DIMOND-550M model is rated for 500W continuous output, with a peak power capability of up to 750W and a redundant power of 100W, ensuring stable operation even under demanding loads.
| Feature | Beskrivelse |
|---|---|
| Modelnummer | BLACK DIMOND-550M |
| Rating Power | 500W (kontinuerlig), 600W (spidsbelastning) |
| 80 PLUS certificering | Guld |
| Modulært | Fuldt modulært |
| PFC type | Aktiv PFC |
| Input bindtage | 90~264V AC (50Hz/60Hz) |
| Interface Type | 24Pin (ATX) |
| CPU strømstik | 8 pin x2 (4+4Pin) |
| Graphics Card 12V Pin Number | 8 pin (6+2Pin) |
| Antal SATA-porte | 2 |
| D-type Bus Number (MOLEX) | 2 |
| Fans | 1 (PWM controlled, 1400-6800RPM) |
| Støjniveau | 17.8-30 dBA |
| Dimensioner (L x B x H) | 162 mm x 81.5 mm x 40.5 mm |
| Anvendelse | Desktop, Server (ITX Mini PC, POS, NAS, GPU Dock) |
| Certificeringer | CE, 80 PLUS Gold, China National Compulsory Product Certificate |
9. Brugertips
- Kabelstyring: The flat, embossed modular cables are designed for flexibility. Take advantage of this to achieve clean cable routing, especially in small form factor cases, to improve airflow and aesthetics.
- Kompatibilitetskontrol: Før købasing, always verify the physical dimensions (162mm x 81.5mm x 40.5mm) of the PSU against your case's specifications to ensure proper fit. Also, confirm that the included cable types and lengths meet your component requirements.
- Støjniveau: This PSU features a PWM-controlled fan with a low noise output (17.8-30 dBA). If you prioritize a quiet build, this unit is a good choice, as confirmed by user feedback.
- Strømkrav: While the BD550M is rated for 500W continuous, it has a peak output of 600W and higher. Ensure your system's total power draw, especially under load, remains within the continuous rating for optimal stability and longevity.
10. Garanti og support
METALFISH products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official METALFISH webwebsted eller kontakt din forhandler.
A detailed user manual in PDF format is available for download from the product page or by scanning the QR code on the product packaging. This PDF contains additional diagrams and in-depth information.