TOOLTOP ET622/ET623 Network Cable Tester User Manual

1. Introduktion

This manual provides detailed instructions for the operation and maintenance of the TOOLTOP ET622 and ET623 Network Cable Testers. These devices are designed for efficient and accurate testing of network cables, offering a range of functions including cable length measurement, mapping, POE testing, and, for the ET623 model, integrated multimeter capabilities. Please read this manual thoroughly before using the device to ensure safe and correct operation.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden:

• Brug ikke enheden, hvis den ser ud til at være beskadiget eller ikke fungerer korrekt.
• Ensure proper ventilation when using the device for extended periods.
• Hold enheden væk fra vand, fugt og ekstreme temperaturer.
• Brug kun den specificerede strømforsyning og det specificerede tilbehør.
• For ET623, when using multimeter functions, always ensure correct probe connections and appropriate range selection to avoid electrical shock or damage to the device.
• Forsøg ikke at skille enheden ad eller ændre den. Overlad al service til kvalificeret personale.

3. Pakkens indhold

Please check the contents of your package against the list below. If any items are missing or damaged, contact your vendor.

ET622 pakkeliste:

• 1 x Netværkskabeltester (hovedenhed)
• 1 x modtager
• 1 x USB-kabel
• 1 x RJ45-kabel
• 1 x krokodilleklemme
• 1 x engelsk brugervejledning
• 1 x Opbevaringsboks

ET623 pakkeliste:

• 1 x Netværkskabeltester (hovedenhed)
• 1 x modtager
• 1 x USB-kabel
• 1 x RJ45-kabel
• 1 x krokodilleklemme
• 1 x engelsk brugervejledning
• 1 x Opbevaringsboks
• 1 x multimeter testledninger

ET623 with 7 ID Package List:

• 1 x Netværkskabeltester (hovedenhed)
• 1 x modtager
• 1 x USB-kabel
• 1 x RJ45-kabel
• 1 x krokodilleklemme
• 1 x engelsk brugervejledning
• 1 x Opbevaringsboks
• 1 x multimeter testledninger
• 7 x Remote ID

4. Produktet er slutview

The TOOLTOP Network Cable Tester is a versatile tool for network professionals and enthusiasts. It features a 3.2-inch color LCD screen for clear display of test results and various functions.

Nøglekomponenter:

• LCD farveskærm: Viser testresultater, indstillinger og anden information.
• USB opladningsport: For charging the host unit's internal lithium battery.
• RJ-45 Cable Jack: For connecting network cables for testing.
• Tastatur: For navigating menus and selecting functions.
• Mode knap: To switch between different testing modes.
• Tracing Sensor: On the receiver unit, used for detecting cable signals.
• Sound/Sensitivity Adjusting Wheel: On the receiver unit, for adjusting tracing sensitivity and volume.
• Lommelygte: Integrated into the receiver unit for illuminating dark work areas.
• Multimeter Probes (ET623 only): Til elektriske målinger.

5. Specifikationer

Generelle specifikationer

Multimeterspecifikationer (kun ET623)

6. Opsætning og første brug

Before using your TOOLTOP Network Cable Tester, please follow these steps:

6.1 Opladning af hovedenheden

• Connect the provided USB cable to the main unit's USB charging port and a suitable USB power adapter (not included).
• The battery indicator on the screen will show charging status. Charge until full.

6.2 Installing Receiver Battery

• The receiver unit requires a 9V battery (not included).
• Open the battery compartment on the receiver and insert the 9V battery, observing polarity.
• Luk batterirummet forsvarligt.

6.3 Tænd/sluk

• Press and hold the 'MODE' button on the main unit to power on or off.
• The receiver unit typically powers on when its mode dial is turned from 'OFF'.

7. Betjeningsvejledning

The TOOLTOP Network Cable Tester offers various functions accessible via the main unit's screen and buttons. The ET623 model includes additional multimeter functions.

7.1 Måling af netværkskablets længde

This function measures the length of RJ45 8-core or 4-core network cables, telephone lines, and BNC video cables.

• Connect one end of the cable to be measured to the RJ45 port on the main unit.
• Select the 'Length' mode on the main unit.
• The screen will display the measured cable length.

7.2 Cable Mapping (Wiremap Test)

This function tests for open circuits, crossovers, short circuits, and other wiring faults in network cables.

• Tilslut den ene ende af netværkskablet til hovedenhedens RJ45-port.
• Connect the other end of the cable to the receiver unit's RJ45 port.
• Select the 'TEST' or 'SCAN' mode on the main unit.
• The screen will graphically display the wiring status, indicating normal connections, open circuits, short circuits, or cross-overs.

7.3 Tracing Cables (Scan Function)

Use this function to quickly locate a specific cable among a bundle of cables.

• Tilslut den ene ende af målkablet til hovedenheden.
• Select the 'SCAN' mode on the main unit.
• Tænd for modtagerenheden, og juster dens følsomhed.
• Move the receiver's tracing sensor along the cables. The receiver will emit an audible tone (digital mode) or vibrate (vibration mode, ET623 only) when it detects the signal from the target cable.

7.4 QC Connector Crimping Test

This test verifies if the network cable's crystal head is properly crimped and connected.

• Connect the crimped cable to the main unit's RJ45 port.
• Select the 'QC' mode.
• The screen will indicate if the crimping is correct or if there are issues (e.g., 'Line 1-core wire is not properly crimped, and the No.1 light does not light up').

7.5-ports flash

This function helps identify the port on a switch or router to which a cable is connected by causing the port's indicator light to flash.

• Connect the network cable to the main unit.
• Connect the other end of the cable to a port on the network switch/router.
• Select the 'Flash' mode on the main unit.
• The corresponding port light on the switch/router will flash, allowing for easy identification.

7.6 Fjern-ID-tilknytning (valgfrit)

For identifying multiple cable runs simultaneously, optional remote ID units can be used.

• Connect one end of each cable to the main unit and the other end to a numbered remote ID unit.
• Select the 'ID' mode.
• The main unit will display the corresponding ID number for each connected cable.

7.7 POE Test

This function tests Power over Ethernet (POE) connections, including polarity and voltage values for standard and non-standard/IEEE802.3AF/AT POE.

• Connect the POE-enabled cable to the main unit.
• Select the 'POE' mode.
• The screen will display the POE voltage og polaritet.

7.8 Multimeterfunktioner (kun ET623)

The ET623 model includes a full-featured multimeter for various electrical measurements.

• Connect the multimeter test leads to the appropriate ports on the main unit.
• Use the mode button to select the desired measurement (AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Capacitance, Continuity, Diode).
• Follow standard multimeter safety procedures for each measurement.

7.9 NCV Testing

Non-Contact Voltage (NCV) testing allows detection of live circuits without direct contact.

• Select the 'NCV' mode.
• Adjust the sensitivity as needed.
• Bring the device close to the suspected live circuit. The device will indicate the presence of voltage.

7.10 Lommelygte

The receiver unit includes a built-in flashlight for convenience in dark environments.

• Locate the flashlight switch on the receiver unit.
• Toggle the switch to turn the flashlight on or off.

7.11 Low Battery Detection and Auto Power Off

• The device features a low battery detection function, which will alert you when the battery needs charging or replacement.
• To conserve battery life, the device is equipped with an auto power-off feature that activates after a period of inactivity.

8. Brugertips

• For accurate cable length measurements, ensure the cable is fully uncoiled and free of kinks.
• When tracing cables in noisy environments, adjust the receiver's sensitivity carefully to minimize interference.
• Always double-check your connections before performing any tests, especially when using multimeter functions with live circuits.
• Keep the screen clean with a soft, dry cloth to maintain visibility.

9. Vedligeholdelse

9.1 Rengøring

• Tør enheden af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Ensure no moisture enters the ports or openings.

9.2 Opbevaring

• Store the device in its original storage box in a cool, dry place when not in use.
• Remove the 9V battery from the receiver if storing for extended periods to prevent leakage.

9.3 Battery Replacement (Receiver)

• When the low battery indicator appears for the receiver, replace the 9V battery.
• Open the battery compartment, remove the old battery, and insert a new one, ensuring correct polarity.

10. Fejlfinding

Hvis du støder på problemer med din enhed, kan du se følgende almindelige problemer og løsninger:

• Enheden tændes ikke: Check if the main unit is charged or if the receiver's 9V battery is installed correctly and has sufficient power.
• Unøjagtig måling af kabellængde: Ensure the cable is fully uncoiled and properly connected. Verify the cable type setting if applicable.
• Cable mapping shows errors on a known good cable: Re-crimp the RJ45 connectors or try a different cable to isolate the issue. Ensure connections are secure.
• Cable tracing is difficult or noisy: Adjust the receiver's sensitivity. Ensure there are no strong electromagnetic interference sources nearby.
• Multimeter (ET623) shows 'OL' or incorrect readings: Check test lead connections, ensure the correct measurement mode is selected, and verify the component being tested is within the device's range.

11. Garanti og support

For garantioplysninger, teknisk support eller serviceforespørgsler henvises til kontaktoplysningerne fra din forhandler eller producentens officielle webwebstedet. Behold din købskvittering som købsbevis.