DOMRAEM ESP32 WLED IP65 Vandtæt LED-controller Brugsanvisning

1. Introduktion og overview

The DOMRAEM ESP32 WLED IP65 Waterproof LED Controller is a versatile device designed to manage addressable RGB IC LED strips. Featuring a built-in sensitive microphone, it enables dynamic lighting effects synchronized with music. Its IP65 waterproof rating ensures durability for both indoor and outdoor applications. The controller supports a wide range of LED strip types and offers smart control via the WLED app, allowing for extensive customization and integration with smart home systems like Alexa.

The DOMRAEM ESP32 WLED IP65 Waterproof LED Controller, featuring a built-in sensitive microphone, is designed to bring dynamic lighting to your outdoor and indoor spaces. It supports various addressable RGB IC LED strips and offers smart control via the WLED app.

2. Sikkerhedsoplysninger

• The controller has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets from any direction. It is suitable for outdoor use in rainy conditions but must not be submerged in water.
• Sørg for, at input voltage matches the requirements of your LED strip (5V/12V/24V). Incorrect voltage can damage the device and LED strips.
• The device includes integrated fuse protection against short circuits and reverse polarity protection. However, always double-check wiring before powering on to prevent damage.
• Åbn ikke c'enasing of the controller as it may compromise the waterproof seal and void the warranty.

The controller boasts an IP65 waterproof rating, ensuring protection against rain and splashes for safe outdoor use. Note: Do not submerge in water.

3. Pakkens indhold

• WLED music-sync controller ×1
• Hurtigstartguide ×1

4. Specifikationer

Comprehensive product parameters including Model No: DOM-WLE-SF, Input Voltage: DC 5-24V, Chip Type: ESP32, Waterproofness: IP65, Material: Fireproof PC, and dimensions.

The controller supports a wide range of addressable LED strips, including WS2811, WS2812, WS2814, WS2815, SK6812, and more, offering versatility for different lighting projects.

5. Opsætningsvejledning

5.1. Ledningsinstruktioner

Follow the diagram below for correct wiring. Ensure all connections are secure and insulated.

• Red protective caps: Undgå kortslutninger.
• Blå ledning: GND (Ground/Negative)
• Yellow+green wire: IO16 (Data signal line)
• Brun ledning: V+ (Positive power supply Strip VCC)
• V-(Black): Input negativ
• V+(Red): Positiv indgang

Clear wiring instructions: Red for V+ (input), Black for V- (input), Brown for V+ (output), Yellow+Green for IO16 (data), Blue for GND (output). Protective caps prevent short circuits.

5.2. Application Download Methods

The WLED app is essential for controlling your LED controller. Download it using the following methods:

• iOS: Søg efter "WLED" or "WLED Native" in the Apple App Store and download.
• Android: Download the application from the official GitHub releases page: https://github.com/Aircoooke/WLED-App/releases

Download the WLED app: Search 'WLED' or 'WLED Native' on iOS App Store. For Android, download from the provided GitHub link.

5.3. Initial APP Configuration Steps

Follow these steps to configure your WLED controller via the app:

1. Connect your phone to the WLED controller's WLAN (Wi-Fi network).
2. Open your phone's Wi-Fi settings and connect to the WLED-AP network. The default password is "wled1234".
3. After a successful connection, your browser should automatically redirect to the WLED page. If not, open a web browser and navigate to the controller's IP address (usually 4.3.2.1).
4. On the WLED page, click on "WIFI SETTINGS".
5. Click "Scan" to display available Wi-Fi networks. Note: Be sure to choose a 2.4GHz Wi-Fi network; 5GHz networks are not supported.
6. Enter the password for your chosen 2.4GHz Wi-Fi network, then click "save" at the top of the screen.
7. After saving, the controller will restart and attempt to connect to your home Wi-Fi.
8. Once connected, open the WLED App on your phone.
9. Ensure your phone is connected to the same 2.4GHz Wi-Fi network as the WLED controller. The app should now discover and allow you to control the device.

Initial APP configuration involves connecting to the controller's Wi-Fi, accessing the WLED page via browser, setting up 2.4GHz Wi-Fi, and then using the WLED app.

5.4. Connecting with Alexa

To integrate your WLED controller with Amazon Alexa, follow these steps:

1. Go to the control page of the WLED controller in the app or web interface.
2. Click on the "Config" button (usually in the top right corner) to enter the settings.
3. Navigate to "Sync Interfaces".
4. Scroll to find "Alexa Voice Assistant", check the box next to "Emulate Alexa device", and then save your settings.
5. After successfully saving, power cycle the WLED controller (turn it off and then back on).
6. Åbn Amazon Alexa-appen på din smartphone.
7. Go to the "Devices" page (usually at the bottom navigation bar).
8. Click on the "+" sign (top right corner) and then select "Add Device".
9. Scroll down and click on "Other" to proceed.
10. Select "Wi-Fi" as the connection type.
11. Click "Discover Devices" to allow Alexa to find your WLED controller.

Integrate with Alexa: Enable 'Emulate Alexa device' in WLED settings, power cycle, then use the Alexa app to 'Add Device' and 'Discover Devices' via Wi-Fi.

6. Betjeningsvejledning

6.1. Music Dynamic Mode

The built-in sensitive microphone allows the controller to synchronize lighting effects with music. The WLED app provides options to customize how lights react to sound, including melody-based effects and DIY macros.

The Music Dynamic Mode allows the LED controller to synchronize lighting effects with music, utilizing its built-in microphone and ESP32 chip for melody-based lighting and DIY customization.

Experience up to 16 million colors with musical rhythm patterns. The sensitive microphone ensures lights dance to the beat, perfect for daily use and special occasions.

6.2. Dynamiske lyseffekter

The controller comes preloaded with WLED firmware, offering over 100 dynamic lighting effects such as rainbow gradients, breathing mode, meteor showers, and color cycles. These can be easily selected and switched via the WLED app.

Explore over 100 dynamic lighting effects through the WLED app, providing a wide range of options to suit any mood or occasion.

6.3. DIY Lighting Effects and Presets

Customize your lighting experience with DIY effects. The WLED app allows for free adjustment of lighting effects and supports up to 250 user-defined presets.

Unleash your creativity with DIY lighting effects, allowing free customization and up to 250 user presets for unique light displays.

6.4. Segmenteret farvekontrol

The WLED app allows you to divide your LED strip into multiple sections (segments) and apply unique colors and effects to each segment independently. This feature supports up to 800 RGB ICs, 15A current, 255 true colors, and a 2D Matrix Editing Mode.

Achieve segmented color control by dividing your LED strip into multiple sections via the WLED app, applying unique colors and effects to each segment. Supports Max 800 RGB ICs, 15A Current, 255 True Colors, 2D Matrix Editing Mode.

6.5. Microphone Function Configuration

To use the microphone function, it may require initial configuration, especially after a device reset:

1. After resetting the device, the microphone parameters need to be configured for the first time.
2. Access the WLED app settings and navigate to the microphone configuration section.
3. Set the microphone type to "Generic I2S".
4. Configure the I2S SD pin to 26.
5. Configure the I2S WS pin to 5.
6. Configure the I2S SCK pin to 21.
7. After setting these parameters, restart the device for the changes to take effect.

To enable microphone functionality, reset the device, then configure microphone parameters in the WLED app (Generic I2S, SD pin 26, WS pin 5, SCK pin 21) and restart.

6.6. Synkroniseringseffekter

When multiple LED strips are connected to the WLED controller and are on the same Wi-Fi network, their lighting effects can be synchronized for a cohesive display.

Synchronize lighting effects across multiple LED strips connected to the WLED controller on the same Wi-Fi network for a unified display.

7. Vedligeholdelse

• Rensning: Gently wipe the controller's exterior with a soft, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Vandeksponering: While IP65 rated, avoid prolonged exposure to heavy rain or direct water jets. Ensure all cable glands are tightened to maintain the waterproof seal.
• Temperatur: Operate the device within its specified temperature range of -20°C to 45°C to ensure optimal performance and longevity.
• Opbevaring: When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight.

8. Fejlfinding

• Ingen strøm:
  • Kontrollér alle strømforbindelser for at sikre, at de er sikre.
  • Verify that the power supply is functioning correctly and provides the correct voltage (5V/12V/24V) for your LED strips.
  • Inspect the built-in 15A fuse for any signs of damage; replace if necessary.
• Cannot Connect to WLED App/Wi-Fi:
  • Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The controller does not support 5GHz Wi-Fi.
  • Verify that the controller is powered on and broadcasting its WLED-AP network during initial setup.
  • Double-check the Wi-Fi password (default: "wled1234") during initial setup.
  • After configuration, ensure both your phone and the controller are connected to the same home 2.4GHz Wi-Fi network.
  • Try power cycling the controller and your Wi-Fi router.
• LED Strips Not Responding or Displaying Incorrect Colors:
  • Check the wiring connections, especially the data line (IO16), V+, and GND.
  • Ensure your LED strips are compatible addressable types (e.g., WS2811, WS2812B, SK6812).
  • Verify that the correct LED type is selected in the WLED app settings.
  • Check the power supply capacity; insufficient power can lead to dimness or incorrect colors, especially with long strips.
• Mikrofonfunktionen virker ikke:
  • Ensure the microphone has been configured correctly in the WLED app settings (Generic I2S, SD pin 26, WS pin 5, SCK pin 21).
  • Restart the controller after making microphone configuration changes.
  • Check for any physical obstructions blocking the microphone.

9. Brugertips

• Wi-Fi-netværk: Always ensure your Wi-Fi network is set to 2.4GHz for optimal connection and stability with the controller.
• Strømforsyningstilpasning: Brug en strømforsyning, der matcher voltage of your LED strips (5V, 12V, or 24V) and provides sufficient current for the total length of your strips.
• Kabelstyring: For outdoor installations, use waterproof connectors and ensure cables are properly secured to prevent strain and water ingress.
• Eksperimentér med effekter: The WLED app offers a vast array of effects and customization options. Take time to explore and create unique lighting scenes.
• Regelmæssige opdateringer: Check the WLED community forums or GitHub for potential firmware updates that might offer new features or performance improvements.

10. Garanti og support

This DOMRAEM LED controller comes with a 2 års garanti fra købsdatoen. Garantien dækker fabrikationsfejl og funktionsfejl ved normal brug. Den dækker ikke skader forårsaget af forkert installation, misbrug, ulykker, uautoriserede ændringer eller naturkatastrofer.

For technical support, warranty claims, or any questions regarding the product, please contact the seller or DOMRAEM customer service through the platform where the product was purchased. Please have your purchase details and model number (DOM-WLE-SF) ready when contacting support.