Land Rover Phoenix Folding Electric Mountain Bike

1. Introduktion

This manual provides essential information for the safe operation, maintenance, and care of your Land Rover Phoenix Folding Electric Mountain Bike. Please read this manual thoroughly before your first ride and keep it for future reference. This electric bicycle is designed for adult commuting and mountain use, featuring dual shock absorption and a folding frame for convenience.

Figure 1: Land Rover Phoenix Folding Electric Mountain Bike (Cement Ash)

2. Sikkerhedsoplysninger

• Brug altid hjelm og passende sikkerhedsudstyr, når du kører.
• Sæt dig bekendt med lokale færdselslove og -regler for elcykler.
• Udfør en inspektion før hver brug, hvor du kontrollerer bremser, dæk og batteri.
• Rid ikke under påvirkning af alkohol eller stoffer.
• Vær opmærksom på dine omgivelser og kør defensivt.
• Sørg for, at foldemekanismen er forsvarligt låst, inden du kører.
• The waterproof and flame-retardant battery box offers protection, but avoid submerging the bike in water.

3. Opsætning

3.1 Udpakning og første montering

1. Tag forsigtigt cyklen ud af emballagen.
2. Unfold the bicycle frame and secure the folding mechanism. Ensure it clicks into place.
3. Attach the handlebars, pedals, and front wheel if they are not pre-installed. Refer to the included quick-start guide for specific instructions.
4. Adjust the seat post height for a comfortable riding position.

3.2 Batteriinstallation og opladning

The bike features a waterproof and flame-retardant lithium battery, which can be removed for charging.

Figure 2: Removable Lithium Battery

1. Locate the battery on the rear rack. Use the provided key to unlock and remove the battery if necessary.
2. Tilslut opladeren til batteriets opladningsport, og sæt derefter opladeren i en almindelig stikkontakt.
3. Allow the battery to fully charge before the first use. The charger indicator light will change (e.g., from red to green) when charging is complete.
4. Once charged, re-install the battery and lock it securely into place.

4. Betjeningsvejledning

4.1 Tænd/sluk

Locate the power button on the handlebar display or battery. Press and hold to turn the electric system on or off.

4.2 Pedal Assist System (PAS)

The bike features a pedal-assist system. As you pedal, the motor provides assistance, making riding easier. You can typically adjust the level of assistance using buttons on the handlebar display.

4.3 Gashåndtagsbetjening

If equipped, the throttle allows you to engage the motor without pedaling. Use it cautiously, especially when starting.

4.4 Gearskift

Your bike is equipped with a Shimano 7-speed transmission system for smooth gear changes.

Figure 3: Shimano 7-speed Shifter and Rear Dial

Use the 7-speed shift finger on the handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.

4.5 Bremsning

The bike features front and rear mechanical disc brakes for reliable stopping power. The brake levers are equipped with power-off functionality, which cuts motor power when brakes are applied.

Figure 4: Front and Rear Dual Disc Brake System

Apply both brakes simultaneously for effective and controlled stopping. Practice braking in a safe area to get accustomed to the bike's stopping distance.

4.6 Foldemekanisme

The bike is designed for fast folding, making it easy to carry and store.

Figure 5: Bike in Folded Position

Sådan foldes cyklen:

1. Sørg for, at strømmen er slukket.
2. Sænk sadelpinden helt ned.
3. Open the frame folding latch, typically located in the middle of the main frame tube.
4. Fold the frame in half.
5. Fold the handlebars down if they have a folding mechanism.

Reverse these steps to unfold and ensure all latches are securely fastened before riding.

5. Vedligeholdelse

5.1 Pleje af batterier

• Oplad batteriet regelmæssigt, selvom det ikke er i brug, for at bevare dets sundhedstilstand.
• Undgå at dræne batteriet helt.
• Opbevar batteriet et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.

5.2 Rengøring

• Tør cyklen af ​​med reklameamp klud. Undgå at bruge højtryksrensere direkte på elektriske komponenter.
• Rengør kæden og smør den regelmæssigt for at sikre problemfri drift.

5.3 Dæktryk

• Check tire pressure before each ride. Maintain pressure within the range specified on the tire sidewall.

5.4 Brake Checks

• Regularly inspect brake pads for wear and replace them when necessary.
• Ensure brake levers are firm and responsive. Adjust brake cables if there is too much slack.

5.5 Generelt eftersyn

• Kontroller regelmæssigt alle bolte og fastgørelseselementer for tæthed.
• Inspect the frame, fork, and other components for any signs of damage or fatigue.
• Ensure the front and rear shock absorbers are functioning correctly.

Figure 6: Front Fork Shock Absorption

Figure 7: Rear Mid Spring Shock Absorber

6. Fejlfinding

• Cyklen tænder ikke: Check if the battery is charged and properly installed. Ensure all connections are secure.
• Motor hjælper ikke: Verify the pedal assist level is set correctly. Check if the brake levers are fully released, as they cut motor power.
• Bremserne føles svage: Undersøg bremseklodserne for slid. Juster bremsekablets spænding.
• Gearskiftet går ikke jævnt: Check for proper chain lubrication. Inspect derailleur alignment and cable tension.

7. Specifikationer

Figur 8: Nøglefunktioner og komponenter

8. Brugertips

• For optimal battery life, avoid storing the bike in extremely hot or cold conditions.
• Regularly check the quick-release levers on the wheels and seat post to ensure they are tight before each ride.
• When folding, ensure all cables are clear to prevent pinching or damage.
• Adjust the handlebar stem to a comfortable height for your riding style.

9. Garanti og support

For garantioplysninger og kundesupport henvises til sælgers politikker eller kontakt den forhandler, hvor du købte produktet. Gem din købsbevis til eventuelle garantikrav.