1. Produktet er slutview
The HBM200 HITBOX is a versatile and portable single-phase 220V welding machine designed for various welding applications. It incorporates a full-digital control system to ensure precise control and a stable arc during welding, leading to reduced metal loss and enhanced efficiency. This machine is an excellent choice for both experienced welders and beginners due to its user-friendly design and multi-functionality.
It supports three primary welding functions:
- MIG Function: Suitable for gasless iron welding.
- TIG Function: Designed for Argon gas stainless steel welding (Lift TIG).
- ARC funktion: Ideal for no-gas iron welding (MMA).
2. Pakkens indhold
Sørg for, at alle følgende ting er til stede ved udpakning:
- HBM200 svejsemaskine
- MIG fakkel
- Jord Clamp
- Elektrodeholder
- Flux Cored Wire (sample spool)
- stålbørste
- Instruktionsmanual (dette dokument)
3. Opsætningsvejledning
3.1 Wire Spool Installation (for MIG welding)
- Open the side panel of the welding machine to access the wire feed mechanism.
- Mount the 1KG flux core wire spool onto the spindle, ensuring it rotates freely.
- Thread the wire through the guide tube and into the wire feed rollers.
- Adjust the tension on the wire feed rollers to prevent slippage or crushing of the wire.
- Luk sidepanelet forsvarligt.
3.2 Connection Methods for Welding Modes
Refer to the diagram below for proper connection of accessories based on the desired welding mode:
- Gasless MIG: Connect the MIG torch to the positive (+) terminal and the earth clamp til den negative (-) terminal.
- MMA (ARC): Tilslut elektrodeholderen til den positive (+) terminal og jordklemmen.amp til den negative (-) terminal.
- Løft TIG: Connect the TIG torch to the negative (-) terminal and the earth clamp to the positive (+) terminal. (Note: TIG torch and gas regulator are typically sold separately for Lift TIG functionality).
4. Betjeningsvejledning
4.1 Betjeningselementer på frontpanelet
Familiarize yourself with the front panel of the HBM200 for effective operation:
- Digital skærm: Viser aktuelle svejseparametre.
- Funktionstilstandsknap: Press to cycle through MMA, Gasless MIG, and Lift TIG welding modes. The selected mode will be indicated on the display.
- Current Adjust Knob (MIN/MAX): Rotate to adjust the welding current (Amperage) according to your welding requirements.
- Beskyttende lys: When this light illuminates, it indicates that the machine has entered a protective state (e.g., overheating, overcurrent) and requires a temporary stop in operation. Allow the machine to cool down or resolve the issue before resuming.
4.2 Generelle betjeningstrin
- Ensure the machine is connected to a stable 220V power supply.
- Connect the appropriate welding accessories (MIG torch, electrode holder, earth clamp) as per the desired welding mode (refer to Section 3.2).
- Tænd svejsemaskinen.
- Select the desired welding function (MIG, TIG, or ARC) using the Function Mode Button.
- Adjust the welding current using the Current Adjust Knob to match the material thickness and type.
- Begin welding, ensuring proper safety precautions are followed.
- If the protective light illuminates, stop welding immediately and allow the machine to rest.
5. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din HBM200 svejsemaskines lange levetid og optimale ydeevne.
- Rensning: Periodically clean the machine's exterior with a dry, soft cloth. Ensure ventilation openings are free from dust and debris to prevent overheating.
- Trådfremføringsmekanisme: Inspect the wire feed rollers and guide tube for wear or blockages. Clean any metal dust or debris that may accumulate.
- Kabler og forbindelser: Regularly check all welding cables, torch, electrode holder, and earth clamp for skader, flosninger eller løse forbindelser. Udskift beskadigede komponenter med det samme.
- Opbevaring: Store the welding machine in a dry, dust-free environment when not in use.
6. Fejlfinding
If you encounter issues with your HBM200, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Maskinen tænder ikke | No power supply; faulty power cable | Check power connection and outlet; inspect power cable for damage. |
| Beskyttelseslampen er tændt | Overheating; overcurrent | Stop welding, allow machine to cool down. Ensure proper ventilation. Reduce welding current if continuously triggered. |
| Poor arc stability or no arc | Incorrect current setting; poor earth connection; wrong welding mode selected; wire feed issue (MIG) | Adjust current. Ensure earth clamp has good contact. Verify correct mode. Check wire spool installation and feed. |
| Tråden fremføres ikke (MIG) | Wire tangled; feed roller tension incorrect; nozzle blocked | Check wire spool for tangles. Adjust feed roller tension. Clean or replace nozzle. |
7. Specifikationer
Key technical specifications for the HBM200 HITBOX welding machine:
| Attribut | Værdi |
|---|---|
| Model | HBM200 |
| DIY forsyninger | Elektrisk |
| Oprindelse | Fastlandet Kina |
| Materiale/metalforarbejdet | Stainless steel, Carbon steel, Iron |
| Vurderet input Voltage | 220 V |
| Trådsmeltningstype | Kortslutningsoverførsel |
| Maks. belastningskapacitet | 7.1 KVA |
| Nominel udgangsstrøm | 120 A |
| Nominel output Voltage | 25 V |
| Nominel driftscyklus ved 40°C (MIG) | 60 % |
| Trådfremføringshastighed | 15 m/min |
| Tilstand | Ny |
| Oprindelsessted | Shenzhen Kina |
| Brug | Inverter MIG MAG gasfri svejsemaskine |
| Vægt (kg) | 8 KG (Note: Product image indicates 4.6kg, please verify actual weight) |
| Garanti | 1 år |
| Feature | Gasfri |
| Strømindgang AC(V) | 220V voltage |
| Fungere | MIG welder, with Lift TIG function, ARC(MMA) / MIg 3 in 1. |
| Svejsemateriale | Kulstofstål, jern eller rustfrit stål. |
| Nominel driftscyklus (%) | 40% ved 120 amps |
| Teknologi | IGBT-invertersvejsning |
| Svejsestrømområde (A) | 30-120 (MIG) |
| Anvendelse | Svejsetråd 0.8/1.0 mm |
| Frekvens | 50/60 Hz MIG-svejser |
| Pakning | Kartonemballering |
| Nøgle salgsargumenter | MIG TIG MMA 3 IN1 IGBT inverter svejser |
8. Brugertips
- Always wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing, when operating the machine.
- Ensure adequate ventilation in your workspace to disperse welding fumes.
- Before starting any welding project, perform a test weld on scrap material to fine-tune your settings and ensure optimal results.
- For Lift TIG welding, remember that an external TIG torch with a gas valve and an Argon gas cylinder with a regulator are required and typically sold separately.
9. Garanti og support
The HBM200 HITBOX welding machine comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl ved normal brug. Gem venligst din købsbevis til garantikrav.
For technical support, service, or warranty inquiries, please contact your authorized dealer or the manufacturer's customer service department. Refer to the contact information provided with your purchase documentation.
