WAVLINK AX3000 Wi-Fi 6 Repeater/AP/Router Brugermanual

1. Introduktion

The WAVLINK AX3000 Dual Band Wi-Fi 6 Repeater/AP/Router is designed to extend your existing Wi-Fi coverage, eliminate dead zones, and provide high-speed, stable network connectivity throughout your home. Featuring Wi-Fi 6 technology, including BSS Coloring and OFDMA, this device offers enhanced efficiency and performance for multiple connected devices. It supports various operating modes including Repeater, Access Point (AP), Router, and Mesh, making it a versatile solution for diverse networking needs.

2. Sikkerhedsoplysninger

• Ensure the device is placed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Udsæt ikke enheden for vand eller andre væsker.
• Brug kun den strømadapter, der følger med enheden.
• Hold enheden væk fra børn.
• Forsøg ikke at åbne eller reparere enheden selv. Overlad al service til kvalificeret personale.
• Ensure the power outlet is easily accessible for quick disconnection if needed.

3. Pakkens indhold

Kontroller venligst pakkens indhold omhyggeligt. Hvis nogen dele mangler eller er beskadiget, skal du kontakte din forhandler.

• WAVLINK AX3000 Wi-Fi 6 Repeater/AP/Router (WL-WN583HX3)
• Ethernet Cable (100cm/39.4in)
• Hurtig startvejledning
• Safety Information Card

4. Produktet er slutview

4.1 Fysiske egenskaber

The WAVLINK AX3000 features a compact wall-plug design with retractable antennas for flexible placement. It includes essential ports and buttons for easy operation.

4.2 Porte og knapper

• WAN/LAN Port (10/100/1000Mbps): One Gigabit Ethernet port for wired connections.
• Tænd / sluk-knap: Controls the device power.
• Nulstil knap: Bruges til at gendanne fabriksindstillingerne.
• WPS knap: For quick, secure connection to a router or other devices.

4.3 Status-LED-indikatorer

The WPS button also functions as a multi-color LED indicator, providing visual feedback on the device's status:

• Ensfarvet lilla: Enheden er ved at blive aktiveret.
• Hurtigt blinkende rødt: The device is not connected to the higher-level router.
• Langsomt blinkende rødt: The device does not have access to the Internet.
• Hurtigt blinkende blåt: WPS pairing with the higher-level router is in progress.
• Langsomt blinkende blåt: Phone is pairing with WPS, or Mesh pairing is in progress.
• Ensfarvet blå: The Internet is connected and stable, or the device is operating in AP Mode.

5. Opsætning

5.1 Initial Placement and Power On

1. Unpack the device and extend the antennas.
2. Plug the device into a power outlet. Ensure the correct plug type is used for your region.
3. Wait for the device to power on and the LED indicator to show a solid purple, then transition to a status indicating readiness for configuration (e.g., fast blinking red if not yet connected).

5.2 Adgang til Web Interface

To configure your AX3000, you will use its web grænseflade:

1. Connect your computer or mobile device to the repeater's default Wi-Fi network. The default SSID is typically WAVLINK-AX_XXXX (where XXXX are the last four digits of the MAC address, found on the device label).
2. Åbn a web browser og indtast standard IP-adressen 192.168.10.1 or the login URL http://waplogin.link ind i adresselinjen.
3. Follow the on-screen instructions to set up your desired operating mode and network settings.

5.3 WPS Setup (Repeater Mode)

WPS (Wi-Fi Protected Setup) allows for a quick and secure connection without manual configuration:

1. Plug the AX3000 into a power outlet near your main router.
2. Vent på, at enheden starter op.
3. Tryk på WPS-knappen på din primære router.
4. Within two minutes, press and hold the WPS button on the AX3000 for 8 seconds. The LED will fast blink blue during pairing.
5. Once connected, the LED will turn solid blue. You can then unplug the AX3000 and move it to a suitable location within your router's Wi-Fi range.

6. Driftstilstande

The WAVLINK AX3000 supports four main operating modes:

6.1 Repeater Mode (Extend Wi-Fi Signal)

In Repeater Mode, the device extends the coverage of an existing Wi-Fi network. It connects wirelessly to your main router and rebroadcasts the signal.

1. Sæt enheden i en stikkontakt.
2. Få adgang til web interface (as described in Section 5.2).
3. Select 'Repeater Mode' during the setup wizard.
4. Scan for available Wi-Fi networks and select your main router's network.
5. Enter the password for your main router's Wi-Fi network.
6. Configure the extended network's SSID and password (you can choose to keep them the same as your main network).
7. Save settings and wait for the device to restart. The LED should turn solid blue once connected.

6.2 AP Mode (Turn Wired Network to Wireless)

In AP Mode, the device connects to a wired network (e.g., from a modem or router) and creates a new wireless network. This is ideal for adding Wi-Fi capability to a wired-only network.

1. Connect an Ethernet cable from your modem/router's LAN port to the WAN/LAN port of the AX3000.
2. Sæt enheden i en stikkontakt.
3. Få adgang til web interface.
4. Select 'AP Mode' during the setup wizard.
5. Configure the new wireless network's SSID and password.
6. Save settings and wait for the device to restart. The LED should turn solid blue.
7. To connect downstream devices via WPS in AP Mode, press and hold the WPS button for 2 seconds.

6.3 Router Mode (Mini Router for Home Use)

In Router Mode, the device acts as a primary router, connecting directly to a modem and providing both wired and wireless network access.

1. Connect an Ethernet cable from your modem to the WAN/LAN port of the AX3000.
2. Sæt enheden i en stikkontakt.
3. Få adgang til web interface.
4. Select 'Router Mode' during the setup wizard.
5. Configure your Internet connection type (e.g., PPPoE, Dynamic IP, Static IP) and wireless network settings (SSID, password).
6. Save settings and wait for the device to restart. The LED should turn solid blue once connected to the Internet.

6.4 Mesh Mode (Build Mesh System Wi-Fi Network)

Mesh Mode allows you to create a unified Wi-Fi network with seamless roaming by pairing multiple WAVLINK Mesh devices. Note: This device does not support networking with other brands of mesh devices.

1. Set up one AX3000 device as the 'Mesh Router' (e.g., in Router Mode or AP Mode connected to your main network).
2. Plug another AX3000 device (the 'Mesh Extender') into a power outlet within range of the Mesh Router.
3. Wait for the Mesh Extender to boot up.
4. Press and hold the Mesh Pair button on both the Mesh Router and the Mesh Extender for 2 seconds. The LED will slow blink blue during pairing.
5. Once paired, the Mesh Extender will automatically join the Mesh network, and its LED will turn solid blue.

7. Specifikationer

8. Fejlfinding

• Ingen strøm: Ensure the power adapter is securely plugged into both the device and a working power outlet.
• Kan ikke få adgang Web Interface:
  • Verify your device is connected to the repeater's Wi-Fi network (SSID: WAVLINK-AX_XXXX).
  • Ensure you are using the correct IP address (192.168.10.1) or URL (http://waplogin.link).
  • Prøv at rydde din browsers cache eller brug en anden browser.
  • If still unable to access, perform a factory reset (see Section 8.1).
• No Internet Access (Slow Blinking Red LED):
  • Check the connection between the repeater and your main router/modem.
  • Ensure your main router/modem has an active internet connection.
  • Bekræft, at den Wi-Fi-adgangskode, der blev indtastet under opsætningen, er korrekt.
  • If in Repeater Mode, try moving the AX3000 closer to your main router.
• Weak Signal or Dead Zones Persist:
  • Relocate the AX3000 to a central location between your router and the desired coverage area.
  • Avoid placing the device near large metal objects, concrete walls, or other electronic devices that may cause interference.
  • Sørg for, at antennerne er korrekt orienteret.

8.1 Fabriksindstilling

If the device is not functioning correctly or you forget your login credentials, you can perform a factory reset:

1. With the device powered on, locate the Reset button.
2. Use a paperclip or a thin object to press and hold the Reset button for approximately 6 seconds.
3. Release the button when the LED indicators flash. The device will restart with factory default settings.

9. Brugertips

• Kontroller stiktype: Før købasing or setting up, ensure the power plug type (e.g., US, AU, UK, EU) is compatible with your region's electrical outlets.
• Optimal placering: For best performance in Repeater or Mesh Extender modes, place the device roughly halfway between your main router and the area where you need improved Wi-Fi coverage. Ensure it receives a strong signal from the main router.
• Regelmæssige firmwareopdateringer: Tjek den officielle WAVLINK website periodically for firmware updates. Keeping your device's firmware up-to-date can improve performance, stability, and security.
• Sikre dit netværk: Always use strong, unique passwords for your Wi-Fi network and the device's administration interface. Utilize WPA3/WPA2-PSK MIX encryption for maximum security.

10. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosol.
• Ventilation: Sørg for, at ventilationshullerne ikke er blokerede for at forhindre overophedning.
• Power Cycle: If you experience intermittent network issues, try power cycling the device (unplug it for 10 seconds, then plug it back in).

11. Garanti og support

This WAVLINK product comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or visit the official WAVLINK support webwebsted. Behold din købskvittering som købsbevis i forbindelse med garantiservice.