GLEDOPTO ZigBee3.0 Triac AC-dæmper GL-SD-301P brugsanvisning

1. Introduktion

The GLEDOPTO ZigBee3.0 Triac AC Dimmer GL-SD-301P is an ultra-mini smart dimmer designed for controlling dimmable LED, halogen, and incandescent lights. It supports the standard ZigBee 3.0 protocol, allowing compatibility with various ZigBee gateways for APP and voice control. This device also features push switch control and 2.4G RF remote control capabilities, offering flexible operation for your lighting needs.

2. Nøglefunktioner

• Ultra-mini Design: Compact size (42*38*17mm) for easy installation in various scenarios without taking up excessive space.
• ZigBee 3.0-kompatibilitet: Supports standard ZigBee 3.0 protocol, compatible with universal ZigBee bridges and coordinators (e.g., Amazon Echo Plus, Hue, Tuya, Alexa, SmartThings).
• Multi-mode Control: Control via mobile phone APP, voice commands, or a 2.4G RF remote control.
• Forenklet ledningsføring: Upgraded quick connect port design for simpler and quicker installation.
• Høj ydeevne: Supports a maximum power output of 400W (220V) or 200W (110V) for dimmable LED lamps and drivers, and up to 400W (220V) or 200W (110V) for incandescent/halogen lamps.
• Trailing Edge Dimming: Adopts trailing edge dimming design for strong anti-interference ability and extended light lifespan.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

• 1 x emballeringsboks
• 1 x ZigBee Ultra Mini Triac AC Dimmer (Model: GL-SD-301P)
• 1 x Brugervejledning

4. Specifikationer

5. Sikkerhedsoplysninger

WARNING: Risk of electric shock. Installation should be performed by a qualified electrician.

• Afbryd altid strømmen ved afbryderen før installation eller service.
• Do not connect non-dimmable lighting fixtures. Non-dimmable fixtures can cause large pulse currents that may damage the dimmer's MOS tube.
• Ensure the dimmer is installed in a dry environment, away from moisture and extreme temperatures.
• Verify that the total load connected to the dimmer does not exceed its maximum rated power (400W at 220V, 200W at 110V).
• Use appropriate wire types and ensure correct stripping length (8-9mm) for secure connections.

6. Opsætning og installation

6.1 Ledningsmetode

The dimmer features quick connect ports for simplified wiring. Follow these steps:

1. Åbn stikket opad.
2. Tryk ned efter at have indsat ledningen.
3. Ensure wiring is complete and secure before powering on.

6.2 Product Placement

The ultra-mini design allows the dimmer to be placed inside a standard wire box behind your existing push switch.

6.3 Connecting to a ZigBee Gateway

To enable APP and voice control, connect the dimmer to a compatible ZigBee gateway (e.g., Hue Bridge, Amazon Echo Plus, SmartThings, Tuya).

1. Strømfør dine lyskilder: Connect the dimmer to your light source and power it on.
2. Set Up Your Bridge: Plug in your ZigBee bridge and connect it to your WiFi router using the network cable provided.
3. Download the Bridge APP: Download the corresponding APP for your ZigBee bridge (e.g., Hue app).
4. Search Lights in the APP: Start the device searching function within your bridge's APP. If the gateway does not find the device, power off/on the dimmer or perform a reset (see Section 7.1) and try again.

7. Betjeningsvejledning

7.1 Key Functions on the Dimmer

• Nulstil knap: Short press 5 times to reset the controller.
• Niveau knap: Long press to set the minimum brightness of the dimmer. (Assumption: Long press to increase brightness, long press again after releasing for at mindske lysstyrken).
• Trykknap: Short press for Power On/Off. Long press to adjust brightness (Assumption: Long press to increase brightness, long press again after releasing for at mindske lysstyrken).

7.2 APP kontrol

Once connected to your ZigBee gateway, you can control the dimmer using the corresponding smartphone application. This allows for remote control, brightness adjustment, and integration into smart home routines.

7.3 Trykknapstyring

The dimmer can be controlled directly using a traditional push switch connected to it. A short press will turn the light on/off, while a long press will adjust the brightness.

7.4 2.4G RF-fjernbetjening

For local control without a gateway, a compatible 2.4G RF remote control (e.g., GL-RC-010) can be paired with the dimmer to adjust brightness and turn lights on/off.

7.5 Videodemonstration

Watch this video for a visual guide on product packing, APP control, push switch control, and 2.4G RF remote control.

8. Compatible Load Types

The dimmer is designed to work with various dimmable light sources. Refer to the table below for compatible types and maximum loads:

The dimmer utilizes a trailing edge dimming method, which is generally compatible with most dimmable LED drivers and traditional incandescent/halogen lamps.

9. Fejlfinding

• Light not dimming or flickering: Ensure the connected light fixture is dimmable. Non-dimmable lights are not compatible. Check wiring connections for looseness.
• Dimmer not responding to APP/Voice control: Verify the dimmer is successfully paired with your ZigBee gateway. Try resetting the dimmer (short press Reset button 5 times) and re-pairing. Ensure your gateway is connected to the internet and the APP is updated.
• Dimmer not responding to Push Switch/RF Remote: Check wiring for the push switch. For RF remote, ensure it is paired correctly with the dimmer. Replace remote battery if necessary.
• Lysdæmperen bliver varm: Ensure the total load does not exceed the maximum rated power. Overloading can cause overheating and damage. Ensure proper ventilation around the dimmer.
• Dimmer not found during gateway search: Power cycle the dimmer (turn off and on power) or perform a reset, then try searching again. Ensure the dimmer is within range of the ZigBee gateway.

10. Brugertips

• For optimal performance and longevity, always use dimmable light bulbs and fixtures with this dimmer.
• Consider the placement of your ZigBee gateway to ensure good signal strength to all connected devices.
• If experiencing connectivity issues, try moving the dimmer or gateway closer, or adding a ZigBee repeater to extend the network range.
• Regularly check for firmware updates for your ZigBee gateway and associated apps to ensure compatibility and access to new features.

11. Garanti og support

GLEDOPTO products are manufactured to high quality standards. For warranty information and technical support, please refer to the official GLEDOPTO webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.