MASTECH MS2138 Digital Clamp Meter multimeter

1. Introduktion

The MASTECH MS2138 is a reliable digital clamp meter designed for a wide range of electrical measurement tasks. With its multifunctional capabilities and user-friendly features, this tool is ideal for both professionals and hobbyists. This manual provides essential information for the safe and effective operation of your MS2138 clamp måler.

2. Sikkerhedsoplysninger

WARNING: To avoid electrical shock or personal injury, read and understand all instructions before using this meter. Always operate with the battery cover securely closed.

• Always inspect the meter and test leads for any damage before use. Do not use if damaged.
• Påfør ikke mere end den nominelle voltage, som markeret på måleren, mellem terminaler eller mellem enhver terminal og jord.
• Vær forsigtig, når du arbejder med voltagover 30V AC RMS, 42V peak eller 60V DC. Sådanne lydstyrkertages udgør en stødfare.
• Afbryd altid strømmen til kredsløbet og aflade alle højspændingsledninger.tage kondensatorer før test af modstand, kontinuitet, dioder eller kapacitans.
• Betjen ikke måleren omkring eksplosiv gas, dampe eller støv.
• Ensure the rotary switch is in the correct position for the desired measurement before connecting the test leads to the circuit.
• When making current measurements, ensure the circuit is de-energized before clamping the meter around the conductor.

3. Pakkens indhold

Upon opening your MASTECH MS2138 package, please verify that all items listed below are present and in good condition:

• MASTECH MS2138 Digital Clamp Måler
• Testledninger (røde og sorte)
• Carry Bag
• Brugermanual (dette dokument)
• Kalibreringscertifikat

Note: Batteries (3x 1.5V AAA) are NOT included in the delivery and must be purchased separately.

The MASTECH MS2138 Clamp Meter, its packaging, operation manual, calibration certificate, test leads, and batteries (not included in delivery).

4. Produktet er slutview

Familiarize yourself with the components of your MS2138 clamp måler:

Front view of the MASTECH MS2138 showing the LCD display, rotary switch, function buttons, and input terminals.

Nærbillede af clamp jaw, used for non-contact current measurement, and the integrated work light.

Bag view of the meter, indicating the battery compartment and safety warnings.

Dimensions of the MASTECH MS2138: 225mm (height) x 86mm (width) x 32mm (depth).

5. Opsætning

5.1 Batteriinstallation

1. Sørg for, at måleren er slukket.
2. Find batterirummet på bagsiden af ​​måleren.
3. Brug en skruetrækker til at åbne batteridækslet.
4. Insert three (3) 1.5V AAA batteries, observing the correct polarity (+/-).
5. Sæt batterirummets dæksel på igen og fastgør det med skruen.

Note: The meter will display a low battery indicator when the batteries need replacement.

6. Betjeningsvejledning

The MS2138 features a rotary switch to select measurement functions and buttons for additional controls.

6.1 Grundlæggende betjening

• Tænd/sluk: Rotate the central dial from 'OFF' to any desired function to power on. Rotate back to 'OFF' to power off. The meter features auto power off to conserve battery life.
• Funktionsvalg: Use the rotary switch to select the primary measurement type (e.g., V~ for AC Voltage, A~ for AC Current).
• 'FUNC' Button: Press this button to cycle through sub-functions within a rotary switch position (e.g., AC/DC voltage. modstand/kontinuitet/diode/kapacitans).
• 'RANGE' Button: Toggles between auto-ranging and manual ranging. In manual ranging, press repeatedly to select desired range.
• 'REL' Button (Relative Measurement): Stores the current reading as a reference value. Subsequent measurements will display the difference from this reference.
• 'Hz/%' Button (Frequency/Duty Cycle): Used to measure frequency or duty cycle in relevant modes.
• 'HOLD' Button: Fryser den aktuelle aflæsning på displayet. Tryk igen for at slippe.
• 'MAX/MIN' Button: Records the maximum and minimum values during a measurement session. Press and hold for 2 seconds to activate.
• Backlight/Work Light: The meter features a display backlight for low-light conditions and a work light near the clamp kæbe.

6.2 Measuring AC/DC Current (Clamp Fungere)

1. Rotate the dial to the 'A~' (AC Current) or 'A=' (DC Current) position.
2. Åbn clamp kæben ved at trykke på aftrækkeren.
3. Placer clamp around a single conductor (not a cable containing multiple conductors) of the circuit you wish to measure.
4. Ensure the jaw is fully closed.
5. Aflæs den aktuelle værdi på displayet.

Example of using the clamp meter to measure frequency from an electrical outlet.

6.3 Måling af AC/DC Voltage

1. Insert the red test lead into the 'VΩHz' input terminal and the black test lead into the 'COM' terminal.
2. Rotate the dial to the 'V~' (AC Voltage) or 'V=' (DC Voltage) stilling.
3. Tilslut testledningerne på tværs af det kredsløb eller den komponent, der skal måles.
4. Læs bindtage -værdi på displayet.

6.4 Measuring Resistance, Continuity, Diode, and Capacitance

1. Insert the red test lead into the 'VΩHz' input terminal and the black test lead into the 'COM' terminal.
2. Rotate the dial to the 'Ω' (Resistance/Continuity/Diode/Capacitance) position.
3. Press the 'FUNC' button to cycle through Resistance (Ω), Continuity (Buzzer icon), Diode (Diode icon), and Capacitance (F).
4. Connect the test leads to the component. For resistance and capacitance, ensure the component is de-energized.
5. Read the measurement on the display. For continuity, the buzzer will sound if resistance is below 50±20Ω.

7. Specifikationer

Detailed measurement ranges, resolutions, and accuracies for the MASTECH MS2138.

8. Vedligeholdelse

8.1 Rengøring

Tør måleren af ​​med reklameamp en klud og et mildt rengøringsmiddel. Brug ikke slibemidler eller opløsningsmidler. Hold indgangsterminalerne fri for snavs og fugt.

8.2 Udskiftning af batteri

When the low battery indicator appears on the display, replace the batteries as described in the 'Battery Installation' section (5.1). Always use three new 1.5V AAA batteries.

8.3 Opbevaring

If the meter is not to be used for an extended period, remove the batteries to prevent leakage and damage. Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures.

9. Fejlfinding

10. Brugertips

Der var ingen specifikke brugertips tilgængelige fra reviews or Q&A for this product at this time. However, general tips for clamp meter users include:

• Sørg altid for, atamp jaw is fully closed for accurate current measurements.
• Ved måling af strøm, clamp around only one conductor. Clamping around a multi-conductor cable will result in a zero reading as the magnetic fields cancel each other out.
• For stable readings, especially in noisy electrical environments, use the 'HOLD' function to capture a momentary value.
• The 'REL' function is useful for nulling out test lead resistance when measuring small resistances or for comparing measurements against a known baseline.

11. Garanti og support

The MASTECH MS2138 Digital Clamp Meter is designed and manufactured to high-quality standards and is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For any technical support or warranty inquiries, please refer to the contact information provided with your purchase documentation or contact your local MasTech distributor.