ACEZUK M01 Bilstarter Brugsanvisning

1. Introduktion

The ACEZUK M01 Car Jump Starter is a versatile and powerful device designed to provide emergency starting power for your vehicle, act as a portable power bank, and offer illumination with its built-in LED flashlight. This manual will guide you through the safe and effective use of your new jump starter, ensuring you are prepared for unexpected situations on the road or during outdoor activities.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt, før du bruger enheden.
• Hold jumpstarteren væk fra børn og kæledyr.
• Do not short circuit the jumper clamps.
• Do not expose the device to extreme temperatures (below -4°F or above 140°F) or direct sunlight for prolonged periods.
• Do not disassemble, modify, or attempt to repair the unit yourself. This will void the warranty and may cause harm.
• The ACEZUK M01 features 8 kinds of built-in protection, including spark protection, reverse polarity protection, over-current protection, high temperature protection, overload protection, over-voltage protection, over-discharge protection, and anti-interference protection. The car battery indicator will warn you of misuse with a buzz sound and flashing lights.
• Vigtig bemærkning: Please immediately remove the jumper clamps from the car battery after starting the car. Do not use the product to charge the car battery directly.

3. Pakkens indhold

Markér venligst feltet for følgende elementer:

• ACEZUK M01 Car Jump Starter Unit
• Smart jumper kabler
• USB-C ladekabel
• Brugervejledning (dette dokument)
• Opbevaringspose

4. Produktet er slutview

Familiarize yourself with the components of your ACEZUK M01 Car Jump Starter:

• 2.5 tommer LCD-skærm: Clearly shows battery status, input/output indicators, and temperature protection warnings.
• LED Button/Power Button: Used to power on/off the device and cycle through flashlight modes.
• EC5-udgangsport: For connecting the smart jumper cables to jump start a vehicle.
• USB-A Output Port (5V/2.4A): Til opladning af eksterne elektroniske enheder.
• Type-C Input Port (5V/2A, 9V/2A): Til genopladning af jumpstarterenheden.
• LED lys: Giver belysning med flere tilstande.

5. Specifikationer

6. Opsætning

Opladning af startstarter

1. Tilslut det medfølgende USB-C-opladerkabel til Type-C-indgangsporten på jumpstarteren.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (5V/2A or 9V/2A recommended).
3. The 2.5-inch LCD display will show the charging status and current battery level.
4. Charge the unit fully before first use. For optimal jump-starting performance, ensure the device is charged above 25%.

7. Betjeningsvejledning

7.1. Jump Starting Your Vehicle

Følg disse trin for at starte dit køretøj sikkert med startkabler:

1. Klargør køretøjet: Ensure your vehicle is in Park (P) or Neutral (N) and the parking brake is engaged. Turn off all vehicle accessories (lights, radio, AC).
2. Connect Smart Cable: Insert the smart jumper cable into the EC5 output port of the ACEZUK M01 jump starter. Ensure a secure connection.
3. Tilslut til batteri: Fastgør den røde (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. The smart cable indicator will show the connection status. If an error is detected (e.g., reverse polarity), the indicator will flash and/or buzz.
4. Start motor: Once the smart cable indicates a safe connection, start your car engine.
5. Fjern Clamps: Immediately after the car starts, remove the clamps fra bilbatteriet, startende med den sorte (-) kl.amp, derefter den røde (+) clampFrakobl smartkablet fra jumpstarteren.

7.2. Brug som powerbank

The M01 can charge various USB-powered devices:

1. Connect your device's USB charging cable to the USB-A output port (5V/2.4A) on the jump starter.
2. Connect the other end of the cable to your electronic device (e.g., smartphone, tablet, game console, drone, earphone, smart watch, camera).
3. The 12800mAh capacity allows for multiple charges or powering of various devices.

7.3. Brug af LED-lommelygten

The built-in LED flashlight offers three modes for different situations:

1. Press the LED Button/Power Button once to turn on the flashlight in Belysning (steady light) mode.
2. Press the button again to switch to Hurtig flash mode.
3. Press the button a third time to activate Slow Flash (SOS) mode.
4. Press the button a fourth time to turn off the flashlight.

8. Vedligeholdelse

• Opbevaring: Opbevar jumpstarteren på et køligt, tørt sted væk fra direkte sollys og fugt.
• Genopladning: To maintain optimal battery health and readiness, recharge the unit every 3-6 months, even if not in use.
• Rensning: Rengør enheden med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Vandeksponering: Enheden må ikke nedsænkes i vand, og den må ikke udsættes for kraftig regn.

9. Fejlfinding

• Enheden tænder ikke: Ensure the unit is sufficiently charged. Press and hold the power button for a few seconds.
• Bilen starter ikke:
  • Kontroller at jumperen er låstamps are correctly connected to the car battery terminals (red to positive, black to negative).
  • Sørg for at clamps are securely attached to prevent poor contact.
  • Verify the jump starter's battery level is above 25%.
  • If the smart cable indicator shows an error (red light or buzzing), refer to the safety section for potential protection triggers.
• Enheden oplader ikke: Check the USB-C charging cable and the power adapter for proper connection and functionality.
• Lommelygten virker ikke: Ensure the device is powered on. Cycle through the modes by pressing the LED Button/Power Button.

10. Brugertips

• Always keep the jump starter charged, especially before long trips or during cold weather, as cold temperatures can significantly impact battery performance.
• For best results and a higher success rate, ensure the jump starter has at least 25% charge before attempting to start a vehicle.
• Consider keeping the jump starter in its storage pouch to protect it from dust and minor impacts when not in use.

11. Garanti og support

For warranty information or technical support regarding your ACEZUK M01 Car Jump Starter, please refer to the contact details provided with your purchase or visit the official ACEZUK webwebsted. Gem din købsbevis i tilfælde af garantikrav.