Brugermanual til V119 OBD2-scanner

1. Introduktion

The V119 OBD2 Scanner is a versatile diagnostic tool designed for EOBD/CAN compliant vehicles. It allows users to read and clear diagnostic trouble codes (DTCs), perform I/M readiness tests, monitor live data streams, and conduct battery voltage tests. This manual provides detailed instructions for setting up and operating your V119 scanner.

2. Produktfunktioner

• Fuld OBD2-tilstande: Supports all 10 OBD2 diagnostic modes.
• DTC-opslag: Built-in library with over 10,000 Diagnostic Trouble Code definitions.
• I/M parathed: Quickly check emission system status.
• Læs og ryd koder: Retrieve generic and manufacturer-specific codes, and turn off the Check Engine Light.
• Live datastrøm: View sensordata i realtid.
• Frys rammedata: Tag et øjebliksbillede af køretøjets tilstand, når en fejlkode udløses.
• O2-sensortest: Hent resultaterne af O2-sensormonitorens test.
• Batteri Voltage Test: Monitor vehicle battery voltage og sundhed.
• Køretøjsoplysninger: Hent VIN, Cal ID, CVN.
• Brugervenlig grænseflade: Intuitive navigation with Green/Yellow/Red visual indicators for quick status assessment.
• Flersproget support: Supports 13 different languages.
• USB-drevet: Draws power directly from the vehicle's OBD2 port.

3. Opsætning og tilslutning

1. Find OBD2-porten: The 16-pin OBD2 Data Link Connector (DLC) is usually located under the dashboard on the driver's side. Refer to your vehicle's service manual if you cannot find it.
2. Sluk tændingen: Sørg for, at køretøjets tænding er i OFF-positionen, før du tilslutter scanneren.
3. Tilslut scanneren: Plug the V119 scanner's OBD2 connector firmly into the vehicle's DLC.
4. Tænd tændingen: Turn the vehicle's ignition to the ON position (engine off). The scanner will automatically power on and initiate communication with the vehicle's ECU.
5. Sprogvalg (hvis nødvendigt): Hvis du bliver bedt om det, skal du vælge dit foretrukne sprog ved hjælp af navigationsknapperne.

4. Betjeningsvejledning

4.1 Navigation

Brug OK button to confirm selections, EXIT to go back, and the directional arrows (Up, Down, Left, Right) to navigate through menus and options.

4.2 Diagnostic Menu Options

From the main 'Diagnostic Menu', you can select the following functions:

• Læs koder: Viser aktuelle, ventende og permanente diagnosticeringsfejlkoder (DTC'er).
• Slet koder: Clears all DTCs from the vehicle's computer and turns off the Check Engine Light. Note: This does not fix the underlying problem.
• View Frysestativ: Shows engine conditions (fuel trim, engine coolant temp, etc.) at the time the fault code was set.
• I/M parathed: Checks the status of various emission-related monitors to determine if the vehicle is ready for an emissions test.
• Køretøjsoplysninger: Henter køretøjets identifikationsnummer (VIN), kalibrerings-ID (CALID) og kalibreringsverifikationsnummer (CVN).
• Datastrøm: Displays live sensor data in numerical or graphical format.

4.3 Batteritest

The V119 scanner can perform a basic battery voltage test. Navigate to the 'Battery Test' option in the menu.

Scanneren viser det aktuelle batteriniveautage and provide an assessment (e.g., Poor, Medium, Good) based on the voltage reading. This helps in quickly identifying potential battery issues.

4.4 Visuelle indikatorer

The scanner features intuitive Green, Yellow, and Red LED indicators to provide a quick overview of the vehicle's status:

• Grøn: Indicates good condition, all monitors are running and passed.
• Gul: Suggests attention is needed, some monitors may not be ready or a pending code exists.
• Rød: Indicates a serious issue, a confirmed Diagnostic Trouble Code (DTC) is present, requiring immediate action.

5. Vedligeholdelse

• Rensning: Brug en blød, damp klud til at rengøre scannerens yderside. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Opbevar scanneren et tørt, køligt sted, væk fra direkte sollys og ekstreme temperaturer.
• Kabelpleje: Undgå at bøje eller vride OBD2-kablet for meget for at forhindre indre skader.
• Softwareopdateringer: Tjek producentens webbesøg siden regelmæssigt for at se, om der er tilgængelige softwareopdateringer, for at sikre optimal ydeevne og kompatibilitet med nyere køretøjer.

6. Fejlfinding

• Scanneren tænder ikke:
  • Sørg for, at OBD2-stikket er korrekt tilsluttet køretøjets DLC.
  • Kontroller, at køretøjets tænding er i ON-positionen.
  • Kontroller bilens sikring til OBD2-porten (se bilens instruktionsbog).
• Linkfejl/Kommunikationsfejl:
  • Confirm the vehicle is OBD2 compliant (most vehicles from 1996 onwards in the US, 2001 in Europe for petrol, 2004 for diesel).
  • Ensure the ignition is ON and the engine is OFF.
  • Try connecting to a different OBD2 compliant vehicle to rule out scanner malfunction.
  • Check for bent pins in the OBD2 connector on both the scanner and the vehicle.
• Incorrect Code Readings:
  • Ensure the vehicle information (VIN, year, make, model) is correctly entered if prompted.
  • Kontroller, at scannerens software er opdateret.
• DTCs Cannot Be Cleared:
  • If the underlying fault that triggered the code is still present, the code will reappear immediately after clearing. Address the vehicle issue first.
  • Some permanent codes may require multiple drive cycles to clear after the fault is resolved.

7. Specifikationer

8. Garanti og support

For warranty information, please refer to the terms provided by your retailer or the original seller at the time of purchase. For technical support or further assistance, please contact the seller directly through your purchase platform.

9. Brugertips

• Always Consult Vehicle Manual: Before performing any diagnostics, it's advisable to consult your vehicle's owner's manual for specific information regarding its OBD2 system.
• Motor slukket, tænding til: Remember to have the engine off but the ignition on when connecting and operating the scanner for most functions.
• Record Codes: Always write down any Diagnostic Trouble Codes (DTCs) before clearing them. This can be helpful for future reference or if the problem persists.
• Forstå I/M-beredskab: If your vehicle fails an I/M Readiness test, it means some emission monitors have not completed their self-tests. This often requires driving the vehicle under specific conditions (drive cycle) to complete the tests.
• Ryd koder efter reparation: Only clear codes after you have addressed the underlying issue. Clearing codes without fixing the problem will only result in the Check Engine Light returning.