SKMEI 2343 LED Military Digital Watch User Manual

Indledning

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SKMEI 2343 LED Military Digital Watch. Please read this manual carefully to ensure proper use and longevity of your watch.

Opsætning og indledende konfiguration

Your SKMEI 2343 watch features a digital display with multiple functions. Familiarize yourself with the buttons:

• KØRSELSVEJLEDNING: Cycles through different display modes (Time, Stopwatch, Alarm, Countdown, Dual Time).
• LYS: Aktiverer EL-baggrundsbelysningen for at sikre synlighed under dårlige lysforhold.
• STARTE: Bruges til at starte/stoppe funktioner som stopuret eller justere indstillinger.
• NULSTIL: Bruges til at nulstille funktioner eller vælge indstillinger.

Indstilling af tid og dato:

1. I tidstilstand skal du trykke på og holde MODE knappen, indtil sekunderne begynder at blinke.
2. Tryk på NULSTIL button to cycle through the settings (seconds, hour, minute, 12/24H format, month, date, day of week).
3. Brug STARTE knappen for at justere den blinkende værdi.
4. Når alle indstillinger er korrekte, skal du trykke på MODE knappen igen for at forlade indstillingstilstanden.

Aktivering af baggrundsbelysningen:

Tryk på LYS button to illuminate the display. The backlight will remain active for a few seconds.

Betjeningsvejledning

Your watch includes several useful features:

• Stopur: Til måling af forløbet tid.
• Chronograph: Similar to a stopwatch, often with lap/split time capabilities.
• Alarm: Indstil en daglig alarm.
• Nedtælling: Set a timer to count down from a specified duration.
• Multiple Time Zone (2Time): Track time in two different zones.
• Komplet kalender: Displays date, day of week, and month.
• Ugevisning: Viser den aktuelle ugedag.

Cycling Through Modes:

Tryk på MODE button repeatedly to cycle through the main functions: Time Display → Stopwatch → Alarm → Countdown → Dual Time.

Brug af stopuret:

1. Fra tidstilstand, tryk på MODE until you reach the Stopwatch display (usually indicated by 'ST' or 'CH').
2. Trykke STARTE for at begynde timingen.
3. Trykke STARTE igen for at sætte tidtagningen på pause.
4. Trykke NULSTIL for at nulstille stopuret.

Indstilling af alarm:

1. Fra tidstilstand, tryk på MODE until you reach the Alarm display (usually indicated by 'AL').
2. Tryk og hold STARTE indtil timecifrene blinker.
3. Bruge NULSTIL to select the hour, then STARTE for at justere værdien.
4. Gentag i minutter.
5. Trykke MODE for at bekræfte og afslutte.

Produktdemonstrationsvideo:

Pleje og vedligeholdelse

Vandtæthed:

The SKMEI 2343 watch is rated for 5ATM (50 meters) water resistance. This means it is suitable for everyday use, showering (cold water only), swimming in shallow water, and fishing. However, it is crucial to observe the following:

• GØR IKKE Brug uret med varmt vand eller varmt vand til badning og brusebad. Vanddamp kan trænge ind i uret og forårsage skade.
• GØR IKKE Tryk på en knap, mens uret er nedsænket i vand.
• Avoid prolonged exposure to water, especially at depths exceeding its rating.

Kemisk eksponering:

Do not expose the watch to chemical-containing cosmetics, solvents, or corrosive daily necessities. These substances can corrode the plating color of the watch surface and damage the materials.

Rensning:

Tør uret regelmæssigt af med en blød, tør klud for at fjerne snavs og sved. Ved genstridigt snavs kan du bruge en let tør klud.amp klud kan bruges, efterfulgt af øjeblikkelig tørring.

Udskiftning af batteri:

The watch uses a CR2032 battery. When the display starts to fade or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified technician to maintain water resistance.

Fejlfinding

• Skærmen er tom eller svag: Kontroller batteriet. Hvis batteriet er lavt, skal det udskiftes.
• Knapperne reagerer ikke: Try resetting the watch by removing and reinserting the battery (if comfortable doing so, otherwise seek professional help). Ensure no buttons are stuck.
• Tidspunktet er forkert: Refer to the 'Setting the Time and Date' section. If issues persist, the battery might be low.
• Vand inde i uret: If water vapor or droplets appear inside the watch, stop using it immediately and seek professional repair to prevent further damage.

If you encounter difficulties adjusting the time or any other function, please contact customer service for assistance.

Specifikationer

Brugertips

• Regelmæssig kontrol: Periodically check the watch for any signs of wear or damage, especially to the strap and case.
• Knappleje: Undgå at trykke for hårdt på knapperne.
• Opbevaring: Når uret ikke er i brug i længere perioder, skal det opbevares køligt og tørt, væk fra direkte sollys.

Garanti og support

Ved eventuelle produktrelaterede forespørgsler, teknisk support eller garantikrav bedes du kontakte sælgeren eller producenten direkte. Gem dine købsoptegnelser til senere brug.

Please note that while the seller offers services such as 90-day free returns and fast delivery guarantees, these are separate from the product's inherent warranty against manufacturing defects. For specific warranty terms, refer to the documentation provided at the time of purchase or contact the seller.