BTMETER BT-1600-APP Non-Contact Digital Infrared Thermometer User Manual

1. Introduktion

The BTMETER BT-1600-APP is a versatile non-contact digital infrared thermometer designed for quick and accurate surface temperature measurements. It features dual laser pointers for precise targeting, a wide temperature range, and smart connectivity via a mobile application for remote control and data management. This manual provides essential information for the safe and effective use of your device.

Figure 1: BTMETER BT-1600-APP Infrared Thermometer and its mobile application interface.

2. Nøglefunktioner

• Berøringsfri temperaturmåling: Safely measure surface temperatures of high-temperature, dangerous, or hard-to-reach objects using infrared technology.
• Intelligent Bluetooth Connectivity: Connect to a mobile application (Intelligent Meter App) for remote control, real-time monitoring, data logging, and data sharing.
• Bredt måleområde: Capable of measuring temperatures from -50°C to 1600°C (-58°F to 2912°F).
• Høj nøjagtighed: Provides accurate readings with an accuracy of ±4°C/7.2°F for -50°C to 0°C (-58°F to 32°F), and ±(2% of reading + 2°C/3.6°F) for temperatures above 0°C.
• Hurtig responstid: Delivers measurements in less than 0.25 seconds.
• Dual Laser Pointer: Ensures precise targeting for accurate measurements.
• Justerbar emissionsevne: Emissivity can be adjusted from 0.1 to 1.0 to suit various materials, ensuring higher accuracy.
• Flere måletilstande: Includes Max/Min, Average (AVG), Difference (DIF), High Temperature Alarm (HAL), Low Temperature Alarm (LAL), and Data Storage (REC) for up to 12 sets of data.
• Stort baggrundsbelyst LCD-display: A 2.36-inch ultra-large screen with backlight for clear and easy reading of temperature values and device status.
• Automatisk nedlukning: Features an automatic shutdown function after about 10 seconds of inactivity to conserve battery.
• Genopladeligt batteri: Powered by a 3.7V 400mAh rechargeable lithium battery.

3. Specifikationer

Figur 2: Detaljerede tekniske specifikationer.

4. Pakkens indhold

Når du åbner pakken, skal du kontrollere, at alle nedenstående varer er til stede og i god stand:

• BTMETER BT-1600-APP Bluetooth Thermometer Gun
• Brugermanual
• USB opladningskabel
• Bærbar bæretaske
• 3.0 lille skruetrækker
• Produktboks

Figur 3: Produktpakkens indhold.

5. Opsætning

5.1 Batteriinstallation og opladning

1. Find batterirummet på enheden.
2. Use the provided 3.0 small screwdriver to open the battery compartment cover.
3. Connect the rechargeable lithium battery to the internal connector.
4. Luk batterirummets dæksel og fastgør det med skruen.
5. Connect the USB charging cable to the device's charging port and a suitable USB power source to charge the device. The display will indicate charging status.

Video 1: Demonstrates battery installation and charging of the thermometer.

5.2 Mobile Application Connection (Intelligent Meter App)

1. Download appen: Scan the QR code provided in the user manual or search for "Intelligent Meter" in your device's app store (App Store for iOS, Google Play for Android) to download the application.
2. Kontoregistrering/login: Opret en ny konto, eller log ind, hvis du allerede har en.
3. Tilføj enhed: In the app, navigate to the "Devices" section and select "Add device".
4. Parring: Ensure your thermometer is powered on. The app will search for nearby devices. Select "Infrared Thermometer" from the list.
5. Forbindelse: The app will attempt to connect. Please do not turn off the device during pairing and keep your phone close to the device. Once "Matched successfully" is displayed, the connection is established.
6. Begynd at bruge: Click "Start using" to enter the function page and begin remote control and data viewing.
7. Device Renaming (Optional): You can rename your device in the app's setup page for easier identification.

Figure 4: Steps for connecting the thermometer to the Intelligent Meter App.

6. Betjening

6.1 Enhed overview og knapfunktioner

The thermometer features an intuitive interface with several buttons for easy operation:

Figure 5: Thermometer button layout and display indicators.

• Valg af tilstand: Cycles through various measurement modes (MAX/MIN/AVG/DIF).
• Laserpointer-knap: Activates/deactivates the dual laser pointers for targeting.
• Emissivity/Flash Button (E/E): Adjusts emissivity settings or activates the flashlight.
• Test knap: Initiates a temperature measurement.
• T/DN Button: Toggles temperature units (°C/°F) or navigates down in menus.
• Back Light/Up Button: Turns the display backlight on/off or navigates up in menus.

Figure 6: Touch-screen button interface.

6.2 Tage en måling

1. Ret termometeret mod målobjektet.
2. Press the "Test" button to initiate measurement. The dual laser pointers will help you aim precisely.
3. Temperaturaflæsningen vil blive vist på LCD-skærmen.
4. The device has a fast response time of less than 0.25 seconds.

Figure 7: Scanning temperature with the infrared thermometer.

6.3 Måletilstande

The BT-1600-APP offers 7 measurement modes, accessible via the "MODE" button:

• Max/Min: Measures and displays the maximum and minimum temperatures detected during a scan.
• AVG (Average): Calculates and displays the average temperature.
• DIF (Difference): Shows the difference between the maximum and minimum temperatures.
• HAL (High Temperature Alarm): Alerts when the measured temperature exceeds a preset high limit.
• LAL (Low Temperature Alarm): Alerts when the measured temperature falls below a preset low limit.
• REC (Optagelse): Data storage mode to record temperature readings, storing up to 12 sets.

Figur 8: Overview of measurement modes and display.

Figure 9: Temperature alarm function in action.

6.4 Justering af emissivitet

Emissivity (ε) is a crucial factor for accurate infrared temperature measurement. Different materials emit infrared energy differently. The BT-1600-APP allows you to adjust the emissivity from 0.1 to 1.0 to match the surface being measured.

• Press the "E/E" button to enter emissivity adjustment mode.
• Use the "UP" and "T/DN" buttons to increase or decrease the emissivity value.
• Refer to common emissivity tables for various materials (e.g., oil: 0.94, asphalt: 0.9, water: 0.96).

Figure 10: Emissivity adjustment for different materials.

6.5 Forholdet mellem afstand og punkt (D:S)

The D:S ratio of 30:1 indicates that at a distance of 30 units, the measurement spot size is 1 unit. For example, at 30 inches away, the measurement spot is 1 inch in diameter. This allows for safer measurement by keeping you away from heat sources while maintaining accuracy.

Figure 11: Understanding the Distance to Spot Ratio.

7. Vedligeholdelse

• Rensning: Brug en blød, damp cloth to clean the device's exterior. Do not use abrasive cleaners or solvents. Ensure the lens is clean and free of dust or debris for accurate readings.
• Opbevaring: Store the thermometer in its portable carrying case when not in use to protect it from dust, moisture, and physical damage. Store in a cool, dry place within the specified storage temperature range (-20~60℃).
• Batteripleje: Recharge the battery regularly, even if not frequently used, to maintain its lifespan. Avoid fully discharging the battery for extended periods.

8. Fejlfinding

• Upræcise læsninger:
  • Kontrollér og juster emissivitetsindstillingen, så den passer til det materiale, der måles.
  • Sørg for, at linsen er ren.
  • Verify the distance to spot ratio is appropriate for your measurement.
  • Make sure the ambient temperature is within the specified range for accuracy (23℃~28℃).
• Enheden tænder ikke:
  • Kontroller, om batteriet er korrekt installeret og opladet.
  • Connect the device to a charger to see if it powers on.
• Problemer med appforbindelse:
  • Sørg for, at Bluetooth er aktiveret på din mobilenhed.
  • Keep the thermometer and phone close during pairing.
  • Restart both the thermometer and the app.
  • Tjek, om appen er opdateret til den nyeste version.
• Automatic Shutdown Too Soon:
  • The device has an automatic shutdown function after about 10 seconds of inactivity. This can be adjusted in the app settings.

9. Brugertips

• For best accuracy, always ensure the target surface is clean and free of obstructions.
• When measuring shiny surfaces, consider applying a matte black paint or tape to the area to improve emissivity and accuracy.
• Utilize the data logging feature in the app for long-term monitoring and analysis of temperature trends.
• The dual laser pointers are excellent for pinpointing the exact measurement area, especially from a distance.
• Remember to adjust emissivity for different materials to get the most accurate readings.

10. Sikkerhedsoplysninger

ADVARSEL: LASERSTRÅLING

• Kig ikke ind i laserstrålen.
• Undgå direkte øjenkontakt med laseren.
• Ret ikke laseren mod mennesker eller dyr.
• This device uses a Class II laser product with an output wavelength of 630-670nm.

Figure 12: Laser safety warnings.

Brug altid apparatet på en sikker måde, og følg alle lokale sikkerhedsforskrifter.

11. Garanti og support

For any questions, technical assistance, or warranty claims, please contact our customer support team. When contacting support, please provide the following information to ensure a quick resolution:

• Ordrenummer
• Platform of Purchase
• Full Model Number (BT-1600-APP)
• Detailed Description of the Problem (attaching videos or photos can help us troubleshoot faster)

We are committed to providing professional support and ensuring your satisfaction with BTMETER products.