1. Introduktion
The ATK V100 Pro is a high-performance mechanical keyboard designed for gamers and professionals seeking versatility and responsiveness. Featuring three-mode connectivity (2.4G wireless, Bluetooth 5.0, and wired USB-C), a durable CNC aluminum alloy upper cover, and hot-swappable mechanical switches, it offers a customizable and low-latency experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ATK V100 Pro keyboard.
2. Opsætningsvejledning
2.1 Pakkens indhold
Før du begynder, skal du sørge for at alle ting er til stede:
- ATK V100 Pro Mechanical Keyboard
- USB-C til USB-A-kabel
- 2.4G trådløs modtager
- Keycap Puller / Switch Puller (may be combined)
- Brugervejledning (dette dokument)
2.2 Opladning af tastaturet
The ATK V100 Pro is equipped with an 8000mAh battery for extended wireless use. To charge, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a wall adapter. The keyboard's indicator light will show charging status.
2.3 Tilslutning af tastaturet
The ATK V100 Pro supports three connection modes:
2.3.1 Kablet tilstand
- Connect the USB-C end of the cable to the keyboard and the USB-A end to your computer.
- Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
- Tastaturet vil automatisk blive genkendt af dit operativsystem.
2.3.2 2.4G trådløs tilstand
- Sæt 2.4G USB-modtageren i en ledig USB-port på din computer.
- Set the mode switch on the keyboard to '2.4G' (usually indicated by a wireless icon).
- The keyboard should connect automatically. If not, press and hold the Fn key + the 2.4G key (refer to keyboard layout for specific key) to initiate pairing.
2.3.3 Bluetooth-tilstand
- Set the mode switch on the keyboard to 'Bluetooth' (usually indicated by a Bluetooth icon or 'BT').
- Gå til Bluetooth-indstillingerne på din computer eller enhed, og søg efter nye enheder.
- The keyboard should appear as 'ATK V100 Pro' or similar. Select it to pair.
- You may need to press and hold Fn + a specific Bluetooth key (e.g., Fn+1, Fn+2, Fn+3) to enter pairing mode or switch between paired Bluetooth devices.
2.4 Software Installation (ATK HUB)
For advanced customization of lighting effects, key remapping, and macros, download and install the ATK HUB software from the official ATK website (refer to the 'Warranty & Support' section for the website address). This software allows one-stop management of multiple devices.
3. Betjeningsvejledning
3.1 Grundlæggende nøglefunktioner
The ATK V100 Pro features a 101-key layout. All standard alphanumeric and function keys operate as expected. The keyboard also boasts 1ms ultra-low latency for a responsive experience, especially in gaming.
3.2 Multimedie- og funktionstaster
Use the 'Fn' key in combination with other keys (typically F1-F12 or dedicated multimedia keys) to access multimedia controls (play/pause, volume up/down, mute) and other system functions. Refer to the keycap legends for specific combinations.
3.3 Backlight Control (ARGB)
The keyboard features customizable ARGB lighting with 16 million colors and various effects. You can adjust brightness, change lighting modes, and select colors directly from the keyboard using Fn key combinations, or through the ATK HUB software for more precise control.
3.4 Hot-swap-kontakter
The ATK V100 Pro supports full key hot-swapping, allowing you to change mechanical switches without soldering. This enables personalized DIY experiences and easy replacement of faulty switches.
3.5 Ergonomisk design
The keyboard is designed with two-stage foot support, allowing you to adjust the typing angle for improved comfort and reduced fatigue during long sessions.
4. Vedligeholdelse
4.1 Rengøring
- Generel rengøring: Brug en blød, tør klud til at tørre tastaturets overflade af. Ved genstridigt snavs, brug en let tør klud.amp en klud med mild sæbe kan bruges, så det sikres, at der ikke kommer væske ind i tastaturet.
- Rengøring af tastatur: Use the provided keycap puller to remove keycaps. Clean them with a mild detergent and water, then dry thoroughly before reattaching.
- Fjernelse af støv: Use compressed air to blow out dust and debris from between the keycaps and switches.
4.2 Udskiftning af kontakt
Thanks to the hot-swappable design, individual switches can be replaced easily:
- Power off the keyboard or disconnect it from your device.
- Use the switch puller tool to carefully grip and pull out the desired switch.
- Align the pins of the new switch with the holes on the PCB and gently push it in until it clicks into place. Ensure the pins are not bent.
- Udskift tastaturdækslet.
4.3 Pleje af batterier
- Avoid exposing the keyboard to extreme temperatures (hot or cold).
- Do not allow the battery to fully discharge frequently, as this can reduce its lifespan.
- If storing the keyboard for an extended period, charge it to about 50-70% before storage.
5. Fejlfinding
5.1 Keyboard Not Connecting/Responding
- Kablet tilstand: Sørg for, at USB-C-kablet er korrekt tilsluttet til både tastaturet og computeren. Prøv en anden USB-port eller et andet kabel.
- 2.4G trådløs tilstand: Ensure the 2.4G receiver is properly inserted and the keyboard is switched to 2.4G mode. Check battery level. Try re-pairing (Fn + 2.4G key).
- Bluetooth-tilstand: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Check battery level. Try re-pairing or switching to a different Bluetooth profile (Fn+1/2/3).
- Alle tilstande: Ensure the keyboard is charged. Restart your computer.
5.2 Taster reagerer ikke eller dobbelttastning
- Remove the keycap and check for any debris or obstruction around the switch.
- If the issue persists, the switch might be faulty. Utilize the hot-swappable feature to replace the problematic switch.
5.3 Problemer med baggrundsbelysning
- Ensure the backlight is turned on and brightness is adjusted using Fn key combinations.
- Check the ATK HUB software for any conflicting settings or to reset lighting profiles.
5.4 Lag or High Latency
- In 2.4G or Bluetooth mode, ensure there are no strong interfering signals (e.g., other wireless devices, microwaves) nearby.
- For critical gaming, consider using the wired connection for the most stable and lowest latency performance.
- Ensure the keyboard's battery is sufficiently charged.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Produktnavn | ATK V100 Pro Mechanical Keyboard |
| Tastaturstandard | 101 nøgler |
| Driftsstil | Mekanisk |
| Tilslutningstilstand | Wired (USB-C), Wireless 2.4G, Bluetooth 5.0 |
| Skifter Hot Swap | Ja |
| Baggrundslys type | MULTICOLOR (ARGB, 16 million colors, lower lamp position) |
| Batterikapacitet | 8000 mAh |
| Upper Cover Material | CNC aluminiumslegering |
| Latency | 1 ms Ultra-lav latenstid |
| Anvendelse | Stationær, bærbar |
| Sprog | engelsk |
| Oprindelse | Fastlandet Kina |
| Certificering | CE |
| Tastaturstruktur | E-sports Gasket (PC Positioning Plate, Sandwich Cotton, IXPE/PET Sound Superior Pad, Silicone Sound Silicone Bottom Pad, PORON PCB, Sound Silencer Shaft Seat Cotton) |
6.1 Key Switch Specifications
| Switch Type | Beskrivelse | Aftrækkerslag | Totalt slagtilfælde | Udløsertryk |
|---|---|---|---|---|
| Aniya Axis | Advance Linear Axis, Material Pivot Sound HiFi | 2.0±0.2 mm | 3.2±0.2 mm | 40±10gf |
| Dream Fei Axis | Linear mechanical axis, Soft touch, stable and smooth | 1.8±0.5 mm | 4.0±0.4 mm | 54 gf ± 10 gf |
| Blueberry Ice Cream Shaft | Linear axis, Strong rebound bottoms out ahead of schedule | 1.0±0.4 mm | 3.5±0.3 mm | 40±10gf |
7. Brugertips
- Eksperiment med kontakter: Tag advantage of the hot-swappable design to try different switch types that best suit your typing or gaming preferences.
- Customize RGB Profiles: Use the ATK HUB software to create and save multiple RGB lighting profiles til forskellige applikationer eller spil.
- Hold firmware opdateret: Regularly check the official ATK webwebsted for firmwareopdateringer for at sikre optimal ydeevne og adgang til nye funktioner.
- Optimer trådløs ydeevne: For the best wireless experience, keep the 2.4G receiver close to the keyboard and avoid placing large metal objects between them.
8. Garanti og support
For product support, technical assistance, or warranty inquiries, please contact your seller or visit the official ATK website. For services such as product driver download, please visit https://ATK.PRO.
