1. Introduktion
The Xhorse VVDI2 Universal Remote Key is designed for compatibility with all VVDI tools, including VVDI2 Mini Remote Programmer and VVDI Key Tool. These keys offer a reliable solution for generating and programming remote functions for various vehicle types. Each Wireless Remote Key can earn 40 Bonus Points upon its first use within the Xhorse ecosystem.
2. Opsætning
2.1 Key Disassembly and Battery Installation
To access the internal components for battery installation or replacement, follow one of the methods below. The video demonstrates these procedures:
Video 1: Product unpacking and demonstration of key removal methods.
- Method 1 (Using a Matching Tool): Locate the matching tool slot on the right side of the key. Insert the tool and push up until the back cover of the key pops out.
- Method 2 (Using a Pry Tool): Identify the small gap on the back of the remote key. Use a suitable pry tool to gently lift and separate the back shell in this gap.
- Method 3 (Manual Separation): Firmly pull both sides of the remote key apart with your hands. Once separated, carefully remove the shell of the other half to access the internal chip.
The internal chip designs may vary between different XN remote key types (e.g., front and back of the internal chip of the 5 types of remote keys shown in the video are different).
2.2 Connecting to VVDI Tools
Xhorse XN Wireless Remote Keys can be connected to VVDI tools (such as VVDI2 or VVDI Key Tool) using either wireless or wired methods, depending on the specific tool and key type. Refer to your VVDI tool's manual for detailed connection instructions.
3. Betjeningsvejledning
3.1 VVDI Super Remote Generation Process
When generating a VVDI Super Remote, follow these steps in sequence using your compatible VVDI tool:
- Fjerngenerering: Initiate the remote generation function on your VVDI tool.
- Transpondergenerering: Proceed with transponder generation.
- Programming or Cloning Transponder: Complete the process by programming or cloning the transponder.
Vigtig bemærkning: If these procedures are performed out of sequence (e.g., transponder generation, then cloning transponder, then remote generation), the transponder data may be erased. Always follow the correct order.
3.2 Fjernbetjeningens funktioner
The Xhorse XN Wireless Remote Keys provide standard remote key functionalities for vehicle access and ignition, as programmed by the VVDI tool. Specific button functions (lock, unlock, trunk, panic) will correspond to the vehicle model it is programmed for.
4. Vedligeholdelse
4.1 Udskiftning af batteri
The Xhorse XN Wireless Remote Keys use a CR2032 battery (not included). To replace the battery:
- Disassemble the key shell using one of the methods described in Section 2.1.
- Carefully remove the old CR2032 battery from its holder.
- Indsæt et nyt CR2032-batteri, og sørg for korrekt polaritet.
- Reassemble the key shell, ensuring all parts snap securely into place.
4.2 Generel pleje
- Keep the remote key dry and away from moisture.
- Avoid exposing the key to extreme temperatures or direct sunlight for prolonged periods.
- Do not drop or subject the key to strong impacts.
- Rengør om nødvendigt ydersiden med en blød, tør klud.
5. Fejlfinding
- Fjernbetjeningen svarer ikke: Check the battery. Ensure it is correctly installed and has sufficient charge. Verify that the key has been properly programmed to the vehicle using a VVDI tool.
- Programmeringsfejl: Ensure all steps for remote and transponder generation are followed in the correct sequence as outlined in Section 3.1. Incorrect sequencing can lead to data erasure.
- Key not recognized by VVDI tool: Check the connection between the key and the VVDI tool (wired or wireless). Ensure the VVDI tool's software is up-to-date.
- Fysisk skade: If the key has been dropped or exposed to water, internal components may be damaged. Professional inspection may be required.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærkenavn | Xhorse |
| Oprindelse | Fastlandet Kina |
| Certificering | CE |
| Fungere | Fjernnøgle |
| Kvalitet | Fremragende |
| Ledning eller trådløs | Trådløs |
| Supportværktøjer | VVDI2, VVDI KEY TOOL |
| Varenumre (PN) | XNTO00EN, XNDS00EN, XNFO01EN, XNHO00EN, XNAU02EN, XNLEX0EN, XNHY02EN, XNBU01EN |
| Style (Exampdet) | For Toyota, DS, For Ford, For Honda, For Audi |
| Farve | Black (various colors available for specific models) |
| Produktets vægt | Ca. 60-70 g (varierer afhængigt af modellen) |
| Batteri model | CR2032 (ikke inkluderet) |
| Key Blade | Ikke inkluderet |
| Product Size (XNLEX0EN exampdet) | 2.95 x 1.57 x 0.78 tommer (ca. 75 x 40 x 20 mm) |
7. Brugertips
- Bonus Points: Remember that each Xhorse Wireless Remote Key can earn 40 Bonus Points upon its first use, which can be redeemed for special functions and accessories within the VVDI ecosystem.
- Choosing the Right Key: The VVDI Super Remote covers all functions of both Xhorse wired and wireless keys. Xhorse wireless keys typically include an NXP Chip (similar to Hitag series chips like ID46 and ID47), while wired keys do not. Super Remotes have a specialized chip that supports a wider range of key types.
- Component Similarity: Despite functional differences, Xhorse wired, wireless, and Super Remotes often share the same PCB and remote contact part.
8. Garanti og support
XHORSE VVDI2 Universal Remote Keys undergo quality control before delivery to ensure reliability. For technical support or inquiries, please contact your authorized Xhorse dealer or the official Xhorse support channels. Keep your purchase records for any warranty claims.
