BM H-100 LCD elcykeldisplay brugermanual

1. Introduktion

Thank you for choosing the B-M H-100 LCD E-bike Display. This high-quality display is designed to enhance your electric bicycle riding experience by providing essential real-time information. It automatically identifies and is compatible with 24V to 72V electric bicycle systems. The H-100 display offers a clear reflection of your battery charge, real-time power consumption, and riding performance data. Its individual connections are clearly arranged for straightforward and cost-effective installation.

The display features a large screen, is easy to operate, and offers versatile functionality for various riding needs, including speed, mileage, error indications, and battery charge status.

2. Sikkerhedsoplysninger

Please read all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Always ensure the e-bike's power is OFF before installing or disconnecting the display.
• Undgå at udsætte skærmen for ekstreme temperaturer, direkte sollys i længere perioder eller kraftig regn.
• Do not attempt to open or modify the display unit. This will void the warranty and may cause damage.
• Sørg for, at alle forbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
• If you are unsure about any installation steps, consult a qualified e-bike technician.

3. Pakkens indhold

Pakken indeholder følgende varer:

• 1 x B-M H-100 LCD E-bike Display
• 1 x 5-core SM Connector Cable (integrated with display)
• 1 x External Button Unit
• 1 x L.amp Wire (if applicable to your model)

4. Specifikationer

5. Opsætning og installation

The installation of the H-100 display is designed to be straightforward, requiring only a few simple steps. Ensure your e-bike is powered off before beginning installation.

5.1 Montering af skærmen

1. Identify a suitable position on your e-bike's handlebars for the display. Ensure it is easily visible and accessible while riding, without obstructing your view eller kontroller.
2. Loosen the mounting screws on the display's handlebar clamps.
3. Position the display on the handlebars and tighten the screws securely. Do not overtighten.

5.2 Elektriske forbindelser

The H-100 display uses a 5-pin SM connector for main communication and power. Additionally, there are connections for external buttons and a lamp tråd.

1. Locate the corresponding 5-pin SM connector on your e-bike's controller or wiring harness.
2. Carefully align the pins and connect the display's 5-pin SM connector to the e-bike's harness. Ensure a firm connection.
3. Connect the external button unit cable to its designated port on the display's wiring.
4. If your e-bike system supports it and you wish to control a light via the display, connect the lamp wire from the display to your e-bike's lighting system.
5. Route all cables neatly and secure them with cable ties to prevent snagging or damage during riding.

6. Betjeningsvejledning

The H-100 display provides comprehensive information about your ride. The external button unit allows for easy navigation and control.

6.1 Displayfunktioner

The LCD screen clearly shows the following information:

• Hastighed: Current riding speed (km/h or mph).
• Kilometertal: Odometer (ODO), Trip distance (TRIP), Maximum speed (MAX), Average speed (AVG).
• Batteriopladning: Real-time battery level indicator.
• Fejlindikator: Displays 'ERROR' if a system fault is detected.
• PAS-niveau: Pedal Assist System level (indicated by 'PAS' and a number).
• Forlygteindikator: Icon for headlight status.

6.2 Knapfunktioner

The external button unit typically includes:

• Tænd/sluk-knap: Press and hold to power on/off the display. Short press to cycle through display modes (e.g., ODO, TRIP, MAX, AVG).
• Op-knap (+): Increases PAS level, navigates menu options upwards, or increases values in settings.
• Ned-knap (-): Decreases PAS level, navigates menu options downwards, or decreases values in settings.

Specific button combinations for advanced settings (e.g., wheel size, speed limit) may vary by e-bike controller. Refer to your e-bike's main controller manual for detailed programming instructions.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your B-M H-100 LCD E-bike Display, follow these simple maintenance guidelines:

• Rensning: Tør skærmen og kabinettet af med en blød kludamp cloth. Do not use abrasive cleaners, solvents, or excessive water, as these can damage the screen or internal electronics.
• Miljøbeskyttelse: While the display is designed for outdoor use, avoid prolonged exposure to heavy rain or direct water jets. If riding in wet conditions, consider a protective cover.
• Tilslutningskontrol: Kontrollér regelmæssigt alle elektriske forbindelser for at sikre, at de er fastgjorte og fri for korrosion.
• Opbevaring: Når elcyklen og displayet ikke er i brug i længere perioder, skal de opbevares tørt og tempereret.

8. Fejlfinding

If you encounter issues with your H-100 display, consider the following common troubleshooting steps:

• Skærmen tændes ikke:
  • Ensure the e-bike battery is charged and powered on.
  • Check all cable connections, especially the 5-pin SM connector, for looseness or damage.
  • Verify the power button on the external unit is functioning correctly.
• 'ERROR' Message on Display:
  • An 'ERROR' message indicates a fault within the e-bike system. This could be related to the motor, controller, battery, or sensors.
  • Consult your e-bike's main manual for specific error codes and their meanings.
  • Often, turning the e-bike off and on again can reset minor errors. If the error persists, professional diagnosis may be required.
• Inaccurate Speed/Mileage Readings:
  • Check if the wheel size setting in the display's advanced menu (if accessible) matches your e-bike's wheel size.
  • Ensure the speed sensor (usually on the rear wheel) is clean, properly aligned, and not damaged.
• Knapper reagerer ikke:
  • Check the connection of the external button unit to the display.
  • Ensure buttons are not stuck or physically damaged.

If these steps do not resolve the issue, please contact your e-bike dealer or a qualified technician for assistance.

9. Brugertips

Selvom der ikke er specifikke brugertips fra reviews or Q&A were available, here are some general recommendations for optimizing your experience with the H-100 display:

• Regelmæssig overvågning: Pay attention to your battery charge and mileage to plan your rides effectively and avoid running out of power unexpectedly.
• Miljøbevisthed: Be mindful of the display's visibility in different lighting conditions. Adjust your riding posture if glare affects readability.
• Kabelstyring: Ensure all cables are securely fastened and protected from moving parts or potential abrasion points on your e-bike.

10. Garanti og support

For warranty information and technical support, please refer to the terms and conditions provided by your original point of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.