1. Introduktion
The SINOTIMER STVP-932 is an advanced three-phase intelligent voltage protector designed to provide comprehensive protection for electrical equipment against various power supply anomalies. This device features a digital display for real-time voltage monitoring and offers adjustable parameters for over-voltage, under-bindtage, bindtage unbalance, phase sequence, zero line break, and phase failure protection. Its self-resetting capability ensures continuous operation and enhanced system reliability.
2. Sikkerhedsoplysninger
- Installation og vedligeholdelse bør kun udføres af kvalificerede elektrikere.
- Ensure the main power supply is disconnected before any installation, wiring, or maintenance work.
- Kontroller, at voltagBeskytterens e og nuværende klassificeringer matcher dine applikationskrav.
- Do not operate the device if it shows signs of damage.
- Følg altid lokale elektriske forskrifter og regler.
3. Produktet er slutview
3.1 Funktioner
- Over-voltage beskyttelse
- Under-voltage beskyttelse
- Voltage display (separate ABC phase volt measurement)
- Trefaset voltage ubalancebeskyttelse
- Fasefølgebeskyttelse (omvendt fasebeskyttelse)
- Beskyttelse mod nul linjebrud
- Fasefejlbeskyttelse
- Justerbar overvolumentage beskyttelsesværdi
- Justerbar overvolumentage nyttiggørelsesværdi
- Justerbar overvolumentage-beskyttelseshandlingstid
- Justerbar undervolumentage beskyttelsesværdi
- Justerbar undervolumentage nyttiggørelsesværdi
- Justerbar undervolumentage-beskyttelseshandlingstid
- Adjustable 3-phase voltage ubalancebeskyttelsesværdi
- Adjustable 3-phase voltage unbalance protection action time
- Adjustable delay time after power-on
- Adjustable fault recovery delay time
- Reset mode selection
- Fault inquiry function
- Factory data reset function
3.2 Komponenter
The STVP-932 features a clear digital display, control buttons for setting parameters, and robust terminals for secure wiring.
4. Specifikationer
| Parameter | Værdi |
|---|---|
| Modelnummer | STVP-932 |
| Strømforsyning | 3*230V / 400V AC 50/60Hz |
| Maks. belastningskraft | 50A, 63A, or 80A (model dependent) |
| Over-voltage Beskyttelsesområde | 221V~300V-OFF (Adjustable, Default: 280V) |
| Over-voltage Genopretningsområde | 220V~299V (Standard: 250V) |
| Over-voltage Handlingstid | 0.1~10 seconds (Adjustable, Default: 0.2s) |
| Under-voltage Beskyttelsesområde | 150V~219V-OFF (Adjustable, Default: 160V) |
| Dimensioner (L x B x H) | 72 x 65 x 80 mm |
| Materiale | ABS + elektroniske komponenter |
| Farve | Hvid |
5. Opsætning og installation
The STVP-932 is designed for DIN rail mounting within an electrical enclosure. Ensure proper ventilation and clearance around the device.
5.1 Montering
Attach the protector to a standard 35mm DIN rail by snapping the clips on the back of the device onto the rail. Ensure it is securely fastened.
5.2 Ledningsdiagram
Follow the wiring diagram carefully to connect the STVP-932 to your three-phase electrical system. The device has 'IN' terminals for incoming power (L1, L2, L3, N) and 'OUT' terminals for protected outgoing power (L1, L2, L3, N).
Tilslutningstrin:
- Connect the incoming three-phase power supply (L1, L2, L3, N) to the 'IN' terminals of the STVP-932.
- Connect the 'OUT' terminals (L1, L2, L3, N) of the STVP-932 to the load or downstream circuit protection devices (e.g., air circuit breaker).
- Sørg for, at alle forbindelser er tætte og sikre for at forhindre løse kontakter og overophedning.
6. Betjeningsvejledning
6.1 Digital skærm
The digital display shows real-time voltage readings for each phase (A, B, C). In normal operation, it cycles through these readings or displays the current status.
6.2 Indstilling af parametre
Use the 'SET' button to enter the parameter setting mode. The 'Up' and 'Down' arrow buttons are used to navigate through parameters and adjust their values. Press 'SET' again to confirm a setting and move to the next parameter, or to exit the setting mode.
Justerbare parametre inkluderer:
- Over-voltage-beskyttelsesværdi (Uvo)
- Over-voltage nyttiggørelsesværdi
- Over-voltage-beskyttelseshandlingstid
- Under-voltage protection value (Uve)
- Under-voltage nyttiggørelsesværdi
- Under-voltage-beskyttelseshandlingstid
- Trefaset voltage ubalancebeskyttelsesværdi
- Trefaset voltage unbalance protection action time
- Delay time after power-on
- Fault recovery delay time
6.3 Reset Mode Selection
The device supports different reset modes. Consult the English manual included in the package for detailed instructions on selecting the appropriate reset mode for your application.
6.4 Fault Inquiry and Factory Reset
The device allows for fault inquiry to review past protection events. A factory data reset option is also available to restore all parameters to their default settings.
7. Fejlfinding
This section provides guidance on common issues you might encounter with the STVP-932.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden udløses ofte | Voltage fluctuations (over/under voltage), phase unbalance, incorrect settings. | Check power supply stability. Adjust protection thresholds (Uvo, Uve) and action times. Verify load balance across phases. |
| Intet display/Ingen strøm | No input power, incorrect wiring, internal fault. | Ensure main power is on. Check input wiring (L1, L2, L3, N). If wiring is correct and power is present, contact support. |
| Device does not reset | Continuous fault condition, incorrect reset mode setting. | Ensure the fault condition has cleared. Check the configured reset mode and recovery delay time. |
| Forkert voltage aflæsninger | Loose connections, sensor issue. | Verify all wiring connections are secure. If the issue persists, contact support. |
8. Vedligeholdelse
- Regularly inspect the device for any physical damage or signs of overheating.
- Hold enheden ren og fri for støv og snavs. Brug en tør, blød klud til rengøring.
- Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de forbliver stramme og sikre.
- Do not attempt to open or repair the device yourself, as this may void any warranty and pose a safety risk.
9. Brugertips
Based on common usage and feedback, here are some tips for optimizing your experience with the STVP-932:
- Indledende opsætning: When first installing, set the protection values slightly wider than your expected normal operating range to avoid nuisance tripping, then fine-tune as needed.
- Overvågning: Regularly check the digital display to understand the typical voltage behavior of your system, which can help in setting optimal protection parameters.
- Forsinkelse i genopretning: Utilize the fault recovery delay time setting to prevent rapid on/off cycling of equipment during intermittent power issues, protecting sensitive loads.
10. Garanti og support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the SINOTIMER customer service department. Keep your purchase receipt and product model number handy for faster assistance.
