VGR V-733 6-in-1 Professional Hair Removal Tool

Indledning

Thank you for choosing the VGR V-733 6-in-1 Professional Hair Removal Tool. This versatile device is designed to provide a comprehensive personal care experience, offering epilation, shaving, callus removal, facial cleaning, massage, and facial hair trimming functions. With its IPX7 waterproof rating, two-speed settings, and convenient USB charging, the V-733 ensures efficient and comfortable use. Please read this manual carefully before first use to ensure safe and optimal performance.

Sikkerhedsoplysninger

• Hold enheden væk fra børn.
• Brug ikke enheden, hvis den er beskadiget eller ikke fungerer korrekt.
• Sørg for, at opladningsporten er tør, før du tilslutter USB-kablet.
• Lad ikke opladningskablet eller adapteren nedsænkes i vand.
• Avoid using the epilator on irritated, sunburned, or broken skin.
• Consult a doctor if you have any skin conditions or concerns before using the device.

Produkt overview

The VGR V-733 is a multi-functional device with interchangeable heads for various grooming needs. Below is an illustration of the main unit and its components, followed by a list of included accessories.

Inkluderede komponenter:

• 1 x Hair Remover Main Unit
• 1 x Epilatorhoved
• 1 x hoved til fjernelse af hård hud
• 1 x barberhoved
• 1 x Facial Cleaning Head
• 1 x massagehoved
• 1 x Facial Hair Trimmer Head
• 1 x USB ladekabel
• 1 x rengøringsbørste
• 1 x brugsanvisning

Opsætning

1. Opladning af enheden

Before first use, fully charge the device. The LED display will show the battery level. A full charge takes approximately 1.5 hours and provides up to 90 minutes of operating time.

1. Sørg for, at enheden er slukket.
2. Connect the USB charging cable to the USB charging port on the bottom of the device.
3. Plug the other end of the USB cable into a compatible USB power source (e.g., computer, laptop, USB adapter, power bank).
4. LED-displayet viser opladningsstatus. Når den er fuldt opladet, skal du frakoble kablet.

2. Montering/afmontering af hoveder

1. To attach a head: Align the desired head with the main unit and press it down until it clicks into place.
2. To detach a head: Press the head release button (refer to Figure 1) and gently pull the head upwards to remove it.

Betjeningsvejledning

The VGR V-733 features two-speed settings for a customized experience. Press the ON/OFF button to turn on the device. Press it again to switch between speeds. The LED display shows the current battery level.

1. Epilator Head (No. 1)

For effective hair removal from legs, arms, underarms, and bikini area.

1. Ensure skin is clean and dry, or use in the shower/bath (IPX7 waterproof).
2. Hold the device at a 90-degree angle to the skin, moving it slowly against the direction of hair growth.
3. Stretch the skin taut with your free hand to help the epilator glide smoothly.

2. Callus Remover Head (No. 2)

Til udglatning af ru hud på fødderne.

1. Use on dry or wet feet.
2. Gently move the callus remover over rough areas, applying light pressure.
3. Do not apply excessive pressure or stay in one area for too long.

3. Shaver Head (No. 3)

For a close and precise shave on various body parts.

1. Can be used wet or dry.
2. Glide the shaver head gently over the skin, moving against the direction of hair growth for best results.

4. Facial Cleaning Head (No. 4)

For deep cleansing of facial skin.

1. Apply your preferred facial cleanser to your face or the brush head.
2. Bevæg børsten forsigtigt i cirkulære bevægelser hen over dit ansigt.
3. Skyl dit ansigt og børstehovedet efter brug.

5. Massage Head (No. 5)

For relaxing facial or body massage.

1. Apply a small amount of massage oil or cream if desired.
2. Gently glide the massage head over the desired area.

6. Facial Hair Trimmer Head (No. 6)

For precise trimming of delicate facial hair.

1. Brug på ren, tør hud.
2. Carefully trim unwanted facial hair.

Wet Use Demonstration:

Opretholdelse

Rensning

Regelmæssig rengøring sikrer optimal ydeevne og hygiejne.

1. Turn off and detach the head after each use.
2. Use the provided cleaning brush to remove any trapped hairs or debris from the head.
3. For thorough cleaning, the device is IPX7 waterproof and can be rinsed under running water. Ensure the main unit's charging port is covered or dry before rinsing.
4. Lad alle dele lufttørre helt, før de monteres eller opbevares igen.

Opbevaring

• Store the device and its accessories in a cool, dry place, away from direct sunlight.
• Behold beskyttelseshætterne på hovederne, når de ikke er i brug.

Fejlfinding

Specifikationer

Brugertips

• For at opnå de bedste epileringsresultater, eksfolier din hud dagen før for at forhindre indgroede hår.
• When using the epilator, hold your skin taut to minimize discomfort and ensure efficient hair removal.
• Always start with the lowest speed setting, especially if you are new to epilation or have sensitive skin, and gradually increase if comfortable.
• After wet use, always detach the head and rinse both the head and the main unit thoroughly, then allow them to air dry completely to prevent mildew and maintain hygiene.
• Regularly clean all attachment heads to ensure optimal performance and longevity of the device.

Garanti og support

Garanti

All VGR products come with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

Støtte

If you encounter any issues with your VGR V-733 device, please refer to the troubleshooting section of this manual. If the problem persists, contact the retailer or the VGR customer support for assistance. Please ensure the item remains in its original condition when reporting damage or issues.