etymoofox 4-kanals kørekamera brugermanual

1. Introduktion

Tak for købetasing the etymoofox 4 Channel Driving Camera. This advanced dash cam system is designed to provide comprehensive surveillance for your vehicle, featuring four 1080P cameras (front, left, right, and an optional rear camera), built-in WiFi and GPS, superior night vision, loop recording, and a 24-hour parking monitor. This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance and safety.

Figure 1: etymoofox 4 Channel Driving Camera Overview

2. Pakkens indhold

Tjek venligst pakken for følgende varer:

• Main Dash Cam Unit (with front, left, and right cameras)
• Sugekopmontering
• Car Charger (Cigarette Lighter Plug)
• GPS modul
• Rear Camera (optional, depending on purchased variant)
• Hardwire Kit (optional, for 24H parking monitor)
• Brugermanual
• SD Card (optional, 32G, 64G, or 128G, depending on purchased variant)

Figur 2: Typisk pakkeindhold

3. Specifikationer

4. Opsætning og installation

4.1. Montering af Dash Cam

1. Fastgør sugekopbeslaget til dashcam-enheden.
2. Clean the desired area on your windshield, preferably behind the rearview mirror, to ensure a strong suction.
3. Press the suction cup firmly against the windshield and engage the locking mechanism. Adjust the camera angle as needed to capture the desired view.

4.2. Isætning af SD-kortet

Insert a Class 10 or higher Micro SD card (up to 128GB) into the designated slot on the dash cam. Ensure it clicks into place. The device will prompt you to format the card upon first use or if a new card is inserted.

4.3. Strømtilslutning

The dash cam can be powered via the included car charger or an optional hardwire kit.

4.3.1. Using the Car Charger

1. Connect the car charger to the GPS module.
2. Connect the GPS module to the dash cam's power input.
3. Sæt bilopladeren i cigarettænderen i din bil.

Figure 3: Standard Power Connection

Figure 4: Correct Power Connection Diagram

4.3.2. Using the Hardwire Kit (for 24H Parking Monitor)

For continuous 24-hour parking monitoring, a hardwire kit is required. This involves connecting the dash cam directly to your car's fuse box. Professional installation is recommended.

Figure 5: Hardwire Kit Installation Steps

Trin til installation af fast ledningsføringssæt:

1. Connect to the power interface of the recorder: Plug the hardwire kit into the dash cam's power input.
2. Åbn sikringsboksens dæksel: The position of the fuse box may vary between car models.
3. Installation and use method of step-down line:
   
   • To judge normal power and ACC: Use an electric pen. The red wire of the step-down wire is connected to the car ACC (the light is on when the car is on, off when the car is off). The yellow wire of the step-down wire is connected to the normal power of the car (the light is always on).
4. Connect the black wire with iron and fasten it with the car screws.
5. Test whether the step-down line is working properly:
   
   • When the vehicle starts to ignite, the LED light of the step-down line should be blue.
   • When the output of the step-down line is normal, the recorder is turned on and works normally.
   • When the vehicle is turned off, the LED of the step-down line is red, the ACC of the step-down line turns off the output, and the recorder enters the parking monitoring mode.
6. Installation method without taking electrical appliances: Wrap the red wire ACC of the step-down cable around the pin of the car ACC fuse and then plug it back in. Wrap the positive pole of the yellow wire of the step-down wire around the foot of the car's normal power fuse and then plug it back in.
7. Skjul derefter ledningen langs kanten ind i mellemrummet og fastgør ledningsnettet. Use a tool along the edge of the harness to snap into the gap (top/side seam).
8. Close the fuse box cover - complete.

Figure 6: Hardwire Kit Decompression Cable Diagram

4.4. Rear Camera Connection (if applicable)

If your package includes a rear camera, connect its cable to the AV-In port on the main dash cam unit. Route the cable neatly along the vehicle's interior to the rear windshield and mount the camera securely.

5. Betjeningsvejledning

5.1. Grundlæggende betjening

• Tænd/sluk: The dash cam will automatically power on when the vehicle starts and power off when the engine is turned off (if connected to ACC power). You can also manually power on/off using the power button.
• Indspilning: Once powered on, the dash cam will automatically begin loop recording.
• Menu navigation: Use the 'OK', 'M' (Menu), 'Up', and 'Down' buttons on the device to navigate through settings and options.

5.2. Indledende indstillinger

Upon first use, or after a reset, you may need to configure basic settings:

1. Sprog: Navigate to 'Language' in the settings menu and select your preferred language (e.g., English, Chinese, Korean, Russian, Japanese, French, Italian, German, Arabic, Vietnamese).
2. Dato/tid: Set the correct date and time in 'Clock Settings' or 'Date Format'.
3. Formater SD-kort: It is crucial to format the SD card before first use to ensure compatibility and optimal performance. Go to 'Format SD-Card' in the settings menu and confirm.

5.3. Nøglefunktioner

5.3.1. Loop-optagelse

The dash cam continuously records video in short segments (e.g., 1, 2, or 3 minutes). When the memory card is full, the oldest unprotected fileoverskrives automatisk af nye optagelser. Dette sikrer kontinuerlig optagelse uden manuel indgriben.

Figur 7: Loop-optagelsesfunktionalitet

5.3.2. G-Sensor (Emergency Lock)

The built-in G-sensor detects sudden movements or impacts (e.g., collisions). When triggered, it automatically locks the current video segment (10 seconds before and 30 seconds after the event) to prevent it from being overwritten by loop recording. You can adjust the G-sensor sensitivity (Off, Low, Middle, High) in the settings menu.

5.3.3. 24-timers parkeringsovervågning

With the optional hardwire kit, the dash cam can monitor your vehicle even when parked. If a collision or shaking is detected, the dash cam will automatically turn on and record, locking the video file. This feature provides continuous protection against vandalism or hit-and-runs.

Figure 8: 24H Parking Monitor in action

5.3.4. Wi-Fi & App Connectivity

The dash cam features built-in 5GHz WiFi for faster data transfer. Download the "WIFI Camera" app from your smartphone's app store (Google Play Store for Android). Connect your phone to the dash cam's WiFi signal to:

• View real-time video preview.
• Download recorded videos and photos to your phone.
• Dele files directly to social media.
• Configure dash cam settings.
• Perform OTA firmware upgrades.

Figure 9: WiFi Connectivity and App Features

Figure 10: WiFi and App Support

5.3.5. GPS-funktionalitet

The integrated GPS module allows you to track your route and speed. This information can be viewed on Google Maps via the viidure App or the free viidure GPS Player on your PC (Windows and Mac).

Figure 11: GPS Tracking and Playback

5.3.6. Superior Night Vision

Equipped with an F1.8 aperture and 4 infrared lights, the dash cam provides clear recordings even in low-light conditions or complete darkness. The advanced night vision image sensors ensure high-quality video capture 24/7.

Figure 12: Night Vision Performance

5.3.7. Quadruple Camera Views

The dash cam captures video from four directions: front, left, right, and rear (with optional rear camera). The left and right cameras can be rotated independently to record both the front view and the cabin interior, providing comprehensive coverage.

Figure 13: Quadruple Camera Coverage

Figure 14: All-Round Angle Coverage

5.4. Videodemonstration

Watch this video for a visual guide on unboxing, basic setup, menu navigation, and feature demonstration:

6. Fejlfinding

• Dash Cam tænder ikke:
  
  • Ensure the power cable is securely connected to the dash cam, GPS module (if used), and the car's power source.
  • Check the car charger or hardwire kit for any damage.
  • Verify the car's cigarette lighter socket or fuse box is providing power.
• Problemer med optagelse (f.eks. optagelse ikke, beskadiget files):
  
  • Sørg for, at et SD-kort er isat korrekt.
  • Format the SD card regularly (at least once a month).
  • Use a high-quality Class 10 or U3 speed Micro SD card from a reputable brand.
  • Check if the SD card is full; loop recording should overwrite old files, but locked files will remain.
• Problemer med Wi-Fi-forbindelse:
  
  • Ensure the Wi-Fi function is enabled in the dash cam settings.
  • Sørg for, at du er inden for rækkevidde af dashcam'ets Wi-Fi-signal.
  • Genstart både dashcam'et og din smartphone.
  • Reinstall the "WIFI Camera" app.
• GPS sporer ikke:
  
  • Sørg for, at GPS-modulet er korrekt tilsluttet dashcam'et.
  • The dash cam needs a clear view of the sky to acquire a GPS signal. Ensure it's not obstructed.
  • Check GPS information in the settings menu to see if a signal is being received.
• Parking Monitor not working:
  
  • The 24H parking monitor requires the optional hardwire kit for continuous power. Ensure it is installed correctly.
  • Check G-sensor sensitivity settings; if too low, it might not detect impacts.
• Dash Cam screen is blank or turns off:
  
  • Check the 'LCD Power Save' setting in the menu. It might be set to turn off the screen after a certain period to avoid distraction.
  • Ensure the dash cam is receiving power.

7. Brugertips

• Normal SD-kortformatering: To maintain optimal recording performance and prevent data corruption, it is highly recommended to format your Micro SD card at least once a month.
• G-sensor følsomhed: Adjust the G-sensor sensitivity to 'Low' or 'Middle' to avoid unnecessary file locking from minor bumps or rough roads. Set to 'High' for increased sensitivity if needed.
• Sprogindstillinger: The device supports multiple languages including English, Chinese, Korean, Russian, Japanese, French, Italian, German, Arabic, and Vietnamese. You can easily change this in the settings menu.
• Parking Monitor Power: For reliable 24-hour parking monitoring, ensure you use the optional hardwire kit for a constant power supply.
• Wi-Fi-brug: While the dash cam records independently, the Wi-Fi feature is excellent for quickly reviewing, downloading, and sharing footage directly from your smartphone without needing to remove the SD card.

8. Vedligeholdelse

• Rengøring af linser: Regularly clean the camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid abrasive materials that could scratch the lenses.
• Vedligeholdelse af SD-kort: Always format the SD card periodically to prevent fragmentation and ensure smooth operation. Replace old or slow SD cards to avoid recording errors.
• Temperatur: Avoid exposing the dash cam to extreme temperatures for prolonged periods, as this can affect battery life and device performance.
• Firmwareopdateringer: Check for available firmware updates via the companion app to ensure your dash cam has the latest features and bug fixes.

9. Garanti og support

Your etymoofox 4 Channel Driving Camera comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or any questions regarding your product, please contact the seller or manufacturer directly through their official support channels.