Cada C61076 RC Tiltrotor Aircraft Instruction Manual

1. Introduktion

Thank you for choosing the Cada C61076 RC Tiltrotor Aircraft building block set. This set allows you to construct a detailed and functional remote-controlled tiltrotor aircraft model with 1436 pieces. Designed for enthusiasts aged 8 and above, this model features intricate mechanical functions, including rotating propellers, adjustable rotor angles, and RC driving and steering capabilities when equipped with the optional power pack.

The Cada C61076 RC Tiltrotor Aircraft model.

2. Sikkerhedsoplysninger

• Kvælningsfare: Dette produkt indeholder små dele og er ikke egnet til børn under 3 år. Voksenopsyn anbefales under samling og leg for yngre brugere.
• Batterisikkerhed: If using the optional power pack, ensure batteries are inserted correctly according to polarity. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period. Do not attempt to recharge non-rechargeable batteries.
• Californiens forslag 65 advarsel: ⚠ ADVARSEL: Dette produkt kan udsætte dig for kemikalier, herunder ftalater (DEHP), som i staten Californien er kendt for at forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, gå til www.P65Warnings.ca.gov.
• Driftsmiljø: Operate the RC model in open areas, away from obstacles, people, and pets. Avoid operating in wet conditions or near water.

3. Pakkens indhold

The Cada C61076 set includes:

• 1436 byggeklodser
• Instruction Manual for Assembly
• Displaystativ

Optional Power Pack (Sold Separately):

• 1 x L Size Motor (Pro series)
• 1 x Servo (Pro series)
• 1 x Lipo Battery Box
• 1 x 2.4GHz Radio Control

Optional power pack components (sold separately).

4. Specifikationer

Produktdimensioner og antal enheder.

Detaljeret produktinformation.

5. Opsætning

5.1 Montering

Follow the step-by-step instructions provided in the included building manual to assemble your Cada C61076 Tiltrotor Aircraft. Ensure all pieces are securely connected to prevent structural instability.

5.2 Optional Motorization and Battery Installation

For remote control functionality, the optional power pack (sold separately) is required. This includes an L size motor, a Servo, a Lipo Battery Box, and a 2.4GHz Radio Control.

• Install Lipo Battery Box: Carefully integrate the Lipo Battery Box into the designated compartment within the aircraft model as shown in the assembly instructions. This powers the rotors and driving mechanism.
• Install L Size Motor: Connect the L size motor to the appropriate gears for rotor rotation and driving, following the assembly guide.
• Installer servoen: Connect the Servo to the steering mechanism for controlling the aircraft's direction.
• Installer fjernbetjeningsbatterier: Open the battery compartment on the 2.4GHz Radio Control and insert 2x AA 1.5V batteries (not included), observing correct polarity.

Internal components: 2.4GHz Lipo Battery Box, L Size Motor (Pro series), and Servo (Pro series).

5.3 Display Stand Assembly

The included display stand can be assembled to showcase your completed model. Follow the instructions to connect the stand components and securely place the aircraft on it.

Assembly of the display stand.

6. Betjeningsvejledning

The Cada C61076 Tiltrotor Aircraft features three functional modes controlled by toggles and the remote control. Ensure the optional power pack is installed and powered on before operation.

6.1 Fjernbetjening overview

Remote control layout with indicator light, power button, driving/rotor rotations, and steering controls.

• Power knap: Tænder/slukker fjernbetjeningen.
• Indikatorlys: Viser fjernbetjeningens status.
• Venstre joystick: Controls driving and rotor rotations.
• Højre joystick: Controls steering.

6.2 Functional Modes (3 Gears)

The aircraft has three distinct operational modes, or 'gears' that can be engaged using the internal toggles and external knob/remote control.

Diagram of the control mechanism showing toggles and functions.

• 1st Gear: Propellers Rotation, Rotors Vertical Position
  To engage: Move the left toggle forwardBrug derefter knop on the aircraft to set the rotors to a vertical position, allowing for propeller rotation.

1st Gear: Move left toggle forward, use knob for vertical rotor position and propeller rotation.

• 2nd Gear: Rotor Angle Change (85°)
  To engage: Move the right toggle forward. Brug radiostyring to adjust the rotor angle by 85 degrees.

2nd Gear: Move right toggle forward, use radio control for 85-degree rotor angle change.

• 3rd Gear: RC Driving and Steering (Rotors Horizontal Position of 85°)
  To engage: Move the right toggle backward. Brug knop or radiostyring for rear wheel steering and driving. The rotors will be in a horizontal position of 85 degrees.

3rd Gear: Move right toggle backward, use knob/radio control for rear wheel steering.

6.3 Detailed Features

• Double Sit Cockpit: The cockpit features two seats for minifigures (not included).
• Åbning af døre: The aircraft has functional opening doors.
• Tilt-Axis Gearbox: Allows for the dynamic adjustment of rotor angles.
• Double Tail: Enhances the realistic appearance and stability of the model.

Attention to details: Pitot tube, double sit cockpit, opening door, tilt-axis gearbox, double tail, rotors, control knob.

6.4 Produktdemonstrationsvideo

Watch this video for a comprehensive demonstration of the Cada C61076's features and remote control operation.

7. Vedligeholdelse

• Rensning: Use a soft, dry cloth to gently wipe down the model and remote control. Avoid using harsh chemicals or abrasive materials.
• Opbevaring: Store the model in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove batteries from the remote control and the Lipo Battery Box (if installed).
• Tjek forbindelser: Periodically check all building block connections to ensure they are secure. For motorized models, ensure all electrical connections are firm.

8. Fejlfinding

• Model not moving/rotors not spinning:
  - Ensure the optional power pack (Lipo Battery Box, L Size Motor, Servo) is correctly installed and fully charged.
  - Check that the remote control has fresh AA batteries and is powered on.
  - Verify all electrical connections are secure.
• Fjernbetjeningen reagerer ikke:
  - Replace the AA batteries in the remote control.
  - Ensure the remote control is within the operating range (~30m).
  - Check for any interference from other 2.4GHz devices.
• Vanskeligheder med samling:
  - Refer to the detailed step-by-step building instructions provided with the set.
  - Double-check that you are using the correct pieces for each step.
• Is the helicopter flying?
  - Please note that this is a building block model designed for ground-based RC driving and steering, with functional rotating propellers and adjustable rotor angles. It is not designed for aerial flight.

9. Brugertips

• Valgfri strømforsyning: Remember that the motorization components (L size motor, Servo, Lipo Battery Box, and 2.4GHz Radio Control) are sold separately. If you desire RC functionality, ensure you purchase these components.
• Monteringstålmodighed: Building this 1436-piece model requires patience and attention to detail. Take your time and enjoy the building process.
• Vise: Utilize the included display stand to proudly exhibit your completed Tiltrotor Aircraft model.

10. Overholdelsesoplysninger

Dette produkt er CE-certificeret, hvilket angiver, at det overholder europæiske standarder for sundhed, sikkerhed og miljøbeskyttelse.

11. Garanti og support

For any questions, concerns, or support regarding your Cada C61076 RC Tiltrotor Aircraft, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.