Indledning
The ACEZUK 4000A Portable Car Jump Starter is a powerful and versatile device designed for emergency vehicle starting and as a portable power bank. It is capable of starting vehicles with high displacement engines (up to 10.0L petrol or 8.0L diesel) and can be used up to 50 times on a single charge. This manual provides essential information for safe and effective use of your jump starter.
Sikkerhedsoplysninger
Your ACEZUK jump starter is equipped with advanced safety features to prevent misuse and sparks. Always follow these safety guidelines:
- Sørg for, at jumpstarteren er fuldt opladet før brug.
- Forbind ikke den røde og sorte clamps sammen.
- Hold enheden væk fra børn.
- Udsæt ikke enheden for ekstreme temperaturer eller fugt.
- If the car battery jump box indicator notifies you of incorrect use with an acoustic buzz and flashing lights, disconnect immediately and re-evaluate connections.
The device incorporates 8 types of protection:
- Overtemperaturbeskyttelse
- Overopladningsbeskyttelse
- Beskyttelse mod overladning
- Over Voltage Beskyttelse
- Kortslutningsbeskyttelse
- Omvendt polaritetsbeskyttelse
- Beskyttelse mod interferens
Figure 1: Smart Clamp Beskyttelser
Pakkens indhold
Markér venligst feltet for følgende elementer:
- ACEZUK Portable Car Jump Starter Unit
- Smart Jumper Clamps
- USB-C ladekabel
- Brugervejledning (dette dokument)
- Opbevaringskasse
Figure 2: What's Included
Specifikationer
| Feature | Specifikation |
|---|---|
| Spidsstrøm | 4000A |
| Voltage | 12 V |
| Batterikapacitet | 21800mAh (80WH Mobile Power) |
| Konverteringsrate | 80%~85% |
| Motorkompatibilitet | Op til 10.0 l benzin, 8.0 l diesel |
| Særlige funktioner | Lighting, Warning Light, SOS Lighting |
| LED lysudgang | 400 Lumen |
| LCD Display | 2 Inch (shows battery status, input/output, temperature) |
| Driftstemperatur | -4°F til 140°F (-20°C til 60°C) |
| Antal indbyggede batterier | 4 |
| Ekstern testcertificering | CE |
Figure 3: Peak Current and Engine Compatibility
Figure 4: LCD Display Features
Opsætning
Indledende opladning
Before first use, fully charge the ACEZUK jump starter using the provided USB-C cable. The 2-inch LCD display will show the battery status, indicating when it is fully charged. A full charge ensures optimal performance and readiness for emergencies.
Betjeningsvejledning
1. Jump Starting Your Car
- Insert the jump cable: Plug the smart jumper cable connector firmly into the jump starter's designated port.
- Tilslut clamps: Sæt den røde clamp to the positive (+) terminal of your car battery and the black clamp til den negative (-) terminal. Sørg for en sikker forbindelse.
- Start your car engine: Når clamps are securely connected and the jump starter indicates readiness (no error warnings), start your car's engine.
- Fjern clamps: Immediately after your car starts, remove the clamps from the car battery, then disconnect the jump cable from the jump starter.
Note: Please immediately remove the clips after starting the car to prevent damage.
Figure 5: How to Jump Start Your Car
2. Brug som powerbank
The ACEZUK jump starter doubles as an 80WH portable power bank for various USB charging devices.
- Connect your USB-powered device (e.g., phone, tablet, drone, smart watch, camera, game console) to the jump starter's USB output port using an appropriate charging cable.
- The LCD display will show the output indicator when charging is active.
Figure 6: Power Bank Functionality
3. Brug af LED-lommelygten
The built-in 400 Lumen LED flashlight provides illumination for various situations, especially useful during nighttime emergencies or outdoor activities.
- Press the flashlight button to cycle through the modes: Bright (constant light), Strobe, Warning Light, and SOS.
- Hold the button to turn off the flashlight.
Figure 7: LED Flashlight Modes
Opretholdelse
- Genoplad med jævne mellemrum: To maintain optimal battery health and readiness, recharge the jump starter every 3-6 months, even if not in use.
- Opbevaring: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The recommended operating temperature range is -4°F to 140°F (-20°C to 60°C).
- Rensning: Clean the exterior of the jump starter with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Car does not start | Jump starter battery is low; Clamps are not connected properly; Car battery is severely damaged. | Ensure jump starter is fully charged; Recheck clamp connections (red to +, black to -); Consult a mechanic if car battery is faulty. |
| Jump starter beeps or flashes error lights | Incorrect connection (e.g., reverse polarity); Short circuit; Overload. | Afbryd clamps immediately; Recheck connections carefully, ensuring correct polarity; Refer to safety information for protection details. |
| Enheden oplader ikke | Defekt opladningskabel eller adapter; Problem med opladningsporten. | Try a different USB-C cable and power adapter; Contact customer support if issue persists. |
Brugertips
- Always ensure the jump starter is adequately charged before storing it in your vehicle, especially for long trips or during cold weather.
- Familiarize yourself with the engine displacement limits (up to 10.0L petrol or 8.0L diesel) to ensure compatibility with your vehicle.
- The LCD display is crucial for monitoring battery status and temperature. Pay attention to it to avoid unexpected power loss or operational issues.
Garanti og support
For garantioplysninger eller teknisk support, kontakt venligst sælgeren eller producenten direkte. Gem din købskvittering som købsbevis.
