Quectel BG96 USB-dongle brugermanual

1. Introduktion

The Quectel BG96 is a high-performance, ultra-low power LTE Cat M1/Cat NB1/EGPRS module designed for a wide range of Machine-to-Machine (M2M) and Internet of Things (IoT) applications. This USB dongle variant provides convenient connectivity with global frequency band support and integrated GNSS capabilities (GPS, BeiDou, Glonass). Its compact design and robust features make it suitable for applications requiring reliable and efficient wireless communication.

2. Produktfunktioner

• LTE Cat M1/Cat NB1/EGPRS module with ultra-low power consumption.
• Compact SMT form factor, ideal for size-constrained applications.
• Easy migration from existing GSM/GPRS, UMTS/HSPA, and LTE modules.
• Advanced LGA package for automated manufacturing.
• Supports a rich set of Internet protocols.
• Industry-standard interfaces: USB, UART, I2C, Status Indicator.
• Abundant functionalities including USB drivers for Windows 7/8/8.1/10, Linux, and Android.
• Integrated GNSS (GPS, BeiDou, Glonass) for positioning applications.

3. Pakkens indhold

Sørg for, at alle genstande er til stede og i god stand:

• 1x Quectel BG96 USB Dongle
• 1x 4G Antenna (TS9 Connector)
• 1x GPS+BD+Glonass Antenna (TS9 Connector)

4. Opsætningsvejledning

1. SIM-kort installation

   Locate the Nano SIM card slot on the BG96 module. Gently insert your Nano SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly as shown in the diagram below.

   

2. Antenneforbindelse

   The BG96 module supports two types of antenna interfaces: IPEX 1st generation and TS-9. The provided antennas typically use TS-9 connectors. Connect the 4G antenna to the main antenna interface and the GPS antenna to the GPS antenna interface. Note that TS-9 and IPEX interfaces cannot be used simultaneously for the same function.

   

3. USB-forbindelse

   Plug the BG96 USB Dongle into an available USB port on your computer or host device. The device will typically be recognized automatically, but drivers may be required for full functionality.

4. Serial Port Connection (Optional)

   For advanced development or debugging, the module features a 1.25 pitch 5Pin serial port. Refer to Figure 4 for the pinout: 5V, GND, RX, TX, RESET.

5. Betjeningsvejledning

1. Driver installation

   For Windows (7/8/8.1/10), Linux, and Android operating systems, specific USB drivers are available. These drivers are crucial for the host device to properly communicate with the BG96 module. Please refer to the official Quectel documentation for the latest drivers and installation guides. A list of documentation is often provided by the seller, for exampdet:

   

   Example driver files include "Quectel_LTE_Windows_USB_Driver_V1.0.zip" and "Quectel_WCDMA<E_Linux_USB_R01A01.zip".

2. Netværksforbindelse

   Once drivers are installed and the SIM card is active, the module should attempt to connect to the cellular network. You can monitor the connection status through the module's status indicator or via AT commands through the serial interface.

3. GNSS-funktionalitet

   If using the GPS+BD+Glonass antenna, the module can acquire location data. This functionality is optional and depends on your application's requirements and software configuration.

4. Applikationsintegration

   The BG96 module is designed for M2M and IoT applications such as wireless POS systems, smart metering, asset tracking, and smart wearables. Developers can integrate the module using its various interfaces and supported Internet protocols.

   

6. Vedligeholdelse

• Hold enheden tør og væk fra fugt.
• Undgå at udsætte modulet for ekstreme temperaturer eller direkte sollys.
• Rengør enheden med en blød, tør klud. Brug ikke skrappe kemikalier eller opløsningsmidler.
• Ensure antennas are securely connected but do not overtighten.

7. Fejlfinding

• Ingen netværksforbindelse:
  • Kontroller, at SIM-kortet er korrekt isat og aktivt.
  • Ensure the 4G antenna is properly connected.
  • Tjek netværksdækningen i dit område.
  • Confirm that the correct drivers are installed on your host device.
• Enhed ikke genkendt af pc'en:
  • Prøv en anden USB-port.
  • Reinstall the USB drivers.
  • Ensure the USB cable (if any external cable is used) is functional.
• Poor GNSS Performance:
  • Sørg for, at GPS-antennen er korrekt tilsluttet og har en klar view af himlen.
  • Avoid obstructions that might block satellite signals.

8. Specifikationer

*LTE B25 will be supported on BG96 with R1.2 hardware version. Features marked with an asterisk are under development or subject to specific hardware revisions.

9. Brugertips

• For optimal cellular signal reception, ensure the 4G antenna is positioned in an open area, away from large metal objects or other electronic devices that might cause interference.
• When using GNSS, place the GPS antenna with a clear line of sight to the sky for faster and more accurate positioning.
• Always download the latest drivers and firmware from the official Quectel website or the seller's provided resources to ensure compatibility and performance.
• If experiencing connectivity issues, try restarting both the host device and the BG96 module.

10. Garanti og support

This product typically comes with a 12-month manufacturer's limited warranty. For detailed warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller directly.

For technical assistance, driver downloads, or further documentation (e.g., AT Commands Manuals, Application Notes), please visit the official Quectel website or consult the seller's support channels. Timely technical support is available to minimize design-in time and development efforts.

Relevant documentation may include:

• Quectel_BG96_AT_Commands_Manual_V2.1.pdf
• Quectel_BG96_FILE_AT_Commands_Manual_V1.0.pdf
• Quectel_BG96_FTP(S)_AT_Commands_Manual_V1.0.pdf
• Quectel_BG96_MQTT_Application_Note_V1.0.pdf
• Quectel_BG96_NIDD_AT_Commands_Manual_V1.0.pdf
• Quectel_BG96_PSM_Application_Note_V1.0.pdf
• Quectel_BG96_TCP(IP)_AT_Commands_Manual_V1.0.pdf