Selfieshow Q12s Hidden Design Rotatable Fill Light Bluetooth Tripod Selfie Stick User Manual

1. Produktet er slutview

The Selfieshow Q12s is a versatile all-in-one device combining a selfie stick, tripod, and rotatable fill light with Bluetooth remote control. Designed for both iOS and Android smartphones, it enhances your photography and videography experience with stable support and adjustable lighting.

Figure 1: Selfieshow Q12s Product Overview

Nøglefunktioner:

• 360° Rotatable Fill Light (3 modes, 6 levels of dimming)
• Portable All-in-One Hidden Design
• Durable Aluminum Alloy Rod
• Umbrella-Structure Reinforced Tripod with Anti-slip Silicone Base
• New Bluetooth Selfie Remote Control
• Supports Horizontal and Vertical Shooting
• Kompatibel med Android 4.4+ og iOS 5.1+

2. Pakkens indhold

• Selfieshow Q12s Selfie Stick Tripod x 1
• Brugsanvisning x 1
• Opladningskabel (Type-C) x 1

3. Opsætningsvejledning

3.1 Unfolding the Selfie Stick/Tripod

1. Hold the main body of the device.
2. Gently pull the phone clip upwards to extend the aluminum alloy rod.
3. For tripod mode, spread out the hidden tripod legs at the base until they form a stable triangle. Ensure the anti-slip silicone base is firmly on the surface.

Figure 2: Hidden Design Components

Figure 3: Tripod Stability Features

3.2 Montering af din smartphone

1. Åbn telefonklippet.
2. Carefully place your smartphone into the clip, ensuring it is securely held. The clip supports phone sizes between 59-80mm.
3. Adjust the phone's orientation as needed. The phone holder allows for 360° horizontal rotation and 110° vertical adjustment.

Figure 4: Phone Rotation and Adjustment

3.3 Bluetooth-fjernparring

1. The remote control is detachable from the selfie stick. Slide the switch on the remote to the 'ON' position. The indicator light will start blinking, indicating it's in pairing mode.
2. Gå til Bluetooth-indstillinger på din smartphone, og søg efter tilgængelige enheder.
3. Select "Selfieshow" or "Q12s" (or similar name) from the list to pair. The indicator light on the remote will stop blinking once successfully paired.
4. The remote control uses a CR1632 battery (replaceable).

Figur 5: Trådløs fjernbetjening

3.4 Brug af udfyldningslyset

1. The fill light is located at the top of the phone clip.
2. Press and turn the adjustment button on the fill light to switch between light color temperatures (Warm, Natural, Cold).
3. The fill light offers 6 levels of dimming for each color mode.
4. The fill light is 360° rotatable to direct light as needed.

Figure 6: Fill Light Color Temperature Adjustment

Figure 7: Fill Light Features

4. Betjeningsvejledning

4.1 Taking Photos/Videos with Remote Control

1. Ensure your smartphone is securely mounted and the Bluetooth remote is paired.
2. Åbn din telefons kameraapplikation.
3. Press the 'Click' button on the remote control to take a photo or start/stop video recording.

4.2 Brug som selfiestang

1. Hold the device by its handle.
2. Extend the aluminum alloy rod to your desired length (up to 750mm).
3. Adjust the phone's angle for the perfect shot.

Figure 8: Selfie Stick Mode

4.3 Brug som stativ

1. Extend the aluminum alloy rod and spread the tripod legs for stability.
2. Placer stativet på en flad, stabil overflade.
3. Adjust the height and phone angle as needed for hands-free shooting.

Figure 9: Tripod Mode

4.4 Videodemonstration

5. Vedligeholdelse

5.1 Rengøring

• Tør enheden af ​​med en blød, tør klud.
• Undgå at bruge skrappe kemikalier eller slibende materialer.
• Keep the charging port and buttons free from dust and debris.

5.2 Charging the Fill Light

• Connect the provided Type-C charging cable to the charging port on the fill light.
• Connect the other end to a DC5V/100mA power source.
• The fill light has a 70 mAh RX Battery.

Figure 10: Fill Light Charging Port

5.3 Udskiftning af batteri i fjernbetjening

• The remote control uses a CR1632 coin cell battery.
• To replace, carefully open the remote control casing (refer to the diagram on the remote if available) and swap the old battery with a new CR1632 battery.

6. Fejlfinding

6.1 Problemer med Bluetooth-parring

• Remote not discoverable: Ensure the remote is switched ON and fully charged (if rechargeable) or has a fresh battery (if replaceable). Make sure it's not already paired with another device.
• Connection drops: Ensure your phone and remote are within the 10M Bluetooth distance. Check for interference from other wireless devices.
• Fjernbetjeningen svarer ikke: Try re-pairing the remote with your phone. Turn off Bluetooth on your phone, turn off the remote, then restart both and try pairing again.

6.2 Udfyldningslyset virker ikke

• Lyset tænder ikke: Ensure the fill light is charged. Connect it to a power source using the Type-C cable.
• Light modes/brightness not changing: Check if the adjustment button is functioning correctly. Ensure there's no obstruction.

6.3 Tripod Stability Issues

• Ustabilt stativ: Ensure the tripod legs are fully extended and locked into position. Place the tripod on a flat, level surface.
• Phone slipping: Make sure the phone clip is securely holding your smartphone. The silicone padding should provide adequate grip.

7. Specifikationer

8. Brugertips

• For optimal stability, always ensure the tripod legs are fully extended and placed on a flat, non-slippery surface, especially when the rod is extended to its maximum height.
• When using the fill light, experiment with different color temperatures and brightness levels to match your environment and achieve the desired mood for your photos or videos.
• To conserve battery life for the remote control, remember to switch it off when not in use.
• The compact design makes it easy to carry. Always collapse the stick and fold the tripod legs before storing it in your bag to prevent damage.
• For group photos, utilize the tripod mode and Bluetooth remote for hands-free shooting, allowing everyone to be in the frame.

9. Garanti og support

This product comes with standard accessories including an instruction manual and a charging cable. For any issues, questions, or warranty claims, please contact the seller or retailer from whom you purchased the product. Keep your proof of purchase for warranty validation.