Ferrex T12 Cordless Soldering Iron Welding Station User Manual

1. Introduktion

Thank you for choosing the Ferrex T12 Cordless Soldering Iron Welding Station. This portable and efficient tool is designed for a wide range of soldering applications, offering quick heating, precise temperature control, and robust safety features. It is specifically designed to be powered by Ferrex 20V Lithium-ion batteries, providing cordless convenience for on-the-go repairs and projects.

Pakkeindhold:

• Soldering Station Unit
• Loddekolbehåndtag
• Loddejernsstativ
• Loddespids
• Brugervejledning (dette dokument)

Note: The Ferrex 20V Lithium-ion Battery is ikke inkluderet og skal købes separat.

2. Sikkerhedsoplysninger

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. This soldering station incorporates several safety features to ensure safe operation.

Figure 1: T12 OLED Soldering Station with highlighted safety features.

Key Safety Protections:

• Kortslutningsbeskyttelse: Forhindrer skader fra elektriske kortslutninger.
• Overbelastningsbeskyttelse: Beskytter mod for højt strømforbrug.
• Overstrømsbeskyttelse: Protects components from high current.
• Over-voltage Beskyttelse: Beskytter mod voltage pigge.
• Overvarme beskyttelse: Forhindrer enheden i at overophede.
• Under-voltage Beskyttelse: Includes a Low Voltage Cut Off feature to protect your battery from over-discharge.

The unit is also designed for good heat dissipation to maintain optimal operating temperatures.

3. Specifikationer

4. Opsætning

The Ferrex T12 Soldering Station is designed for quick and easy setup, allowing you to start soldering in seconds.

Figure 2: Assembled T12 OLED Soldering Station.

1. Indsæt batteri: Ensure your Ferrex 20V Lithium-ion battery is fully charged. Slide the battery into the base of the soldering station until it clicks securely into place.

Figure 3: Battery adapter base with connection pins.
2. Tilslut loddekolbe: Connect the cable from the soldering iron handle to the designated port on the soldering station unit.
3. Placering i stativet: Position the soldering iron in its stand when not in use to prevent accidental burns and protect the tip.
4. Tænd: Locate the power switch on the side of the battery adapter base and switch it to the 'ON' position.


Figure 4: Power switch on the soldering station base.

5. Betjeningsvejledning

The T12 Soldering Station features an OLED display and intuitive controls for precise operation.

Figure 5: 1.3-inch Real-Time OLED Display indicators.

1. Tænd: Flip the power switch on the battery adapter base to the 'ON' position. The OLED screen will illuminate.
2. Temperaturjustering: Use the front dial on the soldering station to adjust the desired temperature. The OLED display will show the 'Real-Time Set Temperature' (1) and 'Real-Time Working Temperature' (5).
3. Hurtig opvarmning: The station heats up rapidly, reaching 0-350°C in approximately 8 seconds.
4. OLED Display Information: The 1.3-inch OLED screen provides real-time feedback on various parameters:
• 1. Real-Time Set Temperature: Your target temperature.
• 2. Vibration Prompt: Indicates certain events or modes.
• 3. STC Usage: Status of the temperature control system.
• 4. Volumen i realtidtage: Nuværende batteri voltage.
• 5. Real-Time Working Temperature: Actual temperature of the soldering tip.
• 6. Internal Temperature of the Machine: Internal temperature of the station.
5. Automatisk dvalefunktion: The unit features an adjustable auto-sleep mode (default 2 minutes). When the soldering iron is idle for the set duration, it will enter sleep mode to conserve energy and prolong tip life.
6. Vibration Wake Up: Gently move the soldering iron to wake it up from auto-sleep mode.
7. Automatisk sluk: An adjustable auto shut-off feature is available via the menu, turning off the unit after a prolonged period of inactivity.
8. Temperature Boost Function: This feature allows for a temporary increase in temperature for demanding soldering tasks. It is adjustable via the menu.
9. Lav voltage Cut Off: The system automatically cuts off power if the battery voltage drops too low, protecting the battery from over-discharge.

6. Vedligeholdelse

Korrekt vedligeholdelse sikrer din loddestations levetid og optimale ydeevne.

• Pleje af loddespids: Rengør loddespidsen regelmæssigt med enamp sponge or brass wool to remove excess solder and oxidation. Re-tin the tip with fresh solder after cleaning and before storage.
• Rengøring af enhed: Keep the main unit and battery adapter free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• Varmeafledning: Ensure the ventilation areas of the soldering station are not obstructed to allow for proper heat dissipation.
• Opbevaring: Store the soldering station in a dry, cool place away from direct sunlight and moisture. Remove the battery if storing for extended periods.

7. Fejlfinding

If you encounter issues with your Ferrex T12 Soldering Station, refer to the following common troubleshooting steps:

• Enheden tændes ikke:
• Ensure the Ferrex 20V Lithium-ion battery is fully charged and securely inserted.
• Check that the power switch on the base is in the 'ON' position.
• Soldering iron is not heating up or temperature is unstable:
• Verify that the soldering iron handle is properly connected to the station.
• Check the soldering tip for proper seating and ensure it is not damaged.
• Confirm the set temperature on the OLED display.
• Enheden slukker uventet:
• The battery may be low. Recharge the Ferrex 20V Lithium-ion battery. The 'Low Voltage Cut Off' feature protects the battery from over-discharge.
• Check for any error messages on the OLED display.
• OLED display is blank or flickering:
• Sørg for, at batteriet er opladet og korrekt tilsluttet.
• Power cycle the unit (turn off, then on again).

Hvis problemerne fortsætter efter at have forsøgt disse trin, bedes du kontakte kundesupport.

8. Garanti og support

This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the purchase documentation or contact your retailer. For technical support, replacement parts, or further assistance, please contact the seller or manufacturer directly.