ETEK EKW-63 WiFi Smart Meter & Energy Protector Brugermanual

1. Introduktion

The ETEK EKW-63 is an advanced WiFi-enabled smart meter and energy protector designed to safeguard your electrical circuits and monitor energy consumption. This device integrates over-voltage, under-bindtage, over-current, and earth leakage protection with smart home capabilities, allowing for remote control, voice control, and detailed energy statistics via the Tuya Smart or Smart Life application.

2. Sikkerhedsoplysninger

Læs og forstå alle sikkerhedsinstruktioner, før du installerer eller bruger denne enhed. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter og -regler.
• Always disconnect power at the main circuit breaker before performing any wiring or maintenance.
• Brug ikke enheden, hvis den ser ud til at være beskadiget eller ikke fungerer korrekt.
• Ensure proper grounding and insulation for all connections.
• This device is designed for indoor use only, within the specified operating temperature range.

3. Produktet er slutview

3.1 Hovedfunktioner

• Fjernbetjening: Manage your electrical circuits from anywhere via the mobile app.
• Stemmestyring: Kompatibel med Amazon Alexa og Google Assistant for håndfri betjening.
• Timing: Set schedules for automatic power on/off.
• Loop Timing: Konfigurer gentagne tænd/sluk-cyklusser.
• Overvågning i realtid: Track electricity consumption (voltage, current, power, kWh) in real-time.
• Nedtælling: Set a countdown timer for power control.
• Beskyttelsesfunktioner: Over-voltage, under-bindtage, overstrøm og jordlækagebeskyttelse.

3.2 Enhedskomponenter

The EKW-63 features a clear digital display and intuitive control buttons:

• IN-terminaler: For incoming power supply (Line and Neutral).
• OUT-terminaler: For outgoing load connection (Line and Neutral).
• Digital skærm: Viser realtidsvolumentage (V), current (A), power (kW/h), and leakage (mA).
• SET -knap: Used to enter settings menu and confirm selections.
• Up/Down Buttons (Triangle icons): Bruges til at navigere i menuer og justere værdier.
• WiFi knap: Used for WiFi pairing and status indication.
• Power knap: Manual power on/off control.

3.3 Screen Display Examples

The digital display provides various information and settings:

• Funktionsdisplay: Shows real-time values like voltage, strøm og effekt.
• Over Voltage Indstilling: Adjust the upper voltage grænse.
• Under bindtage Indstilling: Adjust the lower voltage grænse.
• Over Current Setting: Adjust the maximum current limit.
• Lækageindstilling: Configure earth leakage protection sensitivity (can be turned off).
• Restart Time Setting: Set delay for automatic restart after protection trip.
• Over Current Leakage Protect Times: Number of times the device can trip due to over current leakage before manual reset.
• Temperatur: Viser intern temperatur.
• kWh Reset Zero: Option to reset accumulated energy consumption data.
• Reverse Energy: Indication for reverse energy flow.
• Recharge Energy: Indication for energy recharge.

4. Specifikationer

5. Opsætning og installation

5.1 Fysisk installation

The EKW-63 is designed for DIN rail mounting within an electrical distribution box.

1. Strømafbrydelse: Before starting, ensure the main power supply to the circuit is completely disconnected at the main breaker. Verify with a voltage tester.
2. Montering: Snap the EKW-63 onto a standard 35mm DIN rail in your electrical panel.
3. Ledningsføring:
   • Connect the incoming Live (L) and Neutral (N) wires from your power source to the "IN" terminals at the top of the device.
   • Connect the outgoing Live (L) and Neutral (N) wires to your load (e.g., household circuit) to the "OUT" terminals at the bottom of the device.
   • Sørg for, at alle forbindelser er tætte og sikre for at forhindre løse kontakter og overophedning.
4. Strømgendannelse: Once wiring is complete and verified, restore power to the circuit. The device display should light up.

5.2 Appinstallation og WiFi-parring

1. Download app: Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store (available on iOS and Android).
2. Registrer/Log ind: Åbn appen, og opret en ny konto, eller log ind med en eksisterende.
3. Tilføj enhed:
   • Sørg for, at din smartphone er forbundet til et 2.4 GHz WiFi-netværk.
   • On the EKW-63 device, long-press the "WiFi" button until the WiFi indicator starts blinking rapidly (usually 3-5 seconds). This puts the device into pairing mode.
   • In the app, tap the "+" icon (usually top right) to add a device.
   • Select "Electrical Engineering" or "Breaker" / "Protector" from the device list.
   • Follow the on-screen instructions in the app to connect the device to your WiFi network. This typically involves confirming the blinking indicator and entering your WiFi password.
   • Once successfully paired, the WiFi indicator on the EKW-63 will stop blinking and remain solid.
4. Omdøbning af enhed: You can rename the device in the app for easier identification (e.g., "Living Room Breaker").

6. Betjening

6.1 Manuel kontrol

• Tænd/sluk: Tryk på Power-knap (circle with line) on the device to manually turn the power on or off to the connected load.
• View Parametre: The digital display cycles through various parameters like voltage, current, and power. Use the Op/Ned knapper (triangle icons) to manually scroll through different display modes.

6.2 Indstilling af beskyttelsesparametre

To adjust protection thresholds directly on the device:

1. Tryk og hold på SET knap for a few seconds to enter the settings menu.
2. Brug Op/Ned knapper to navigate between settings (e.g., Over Voltage Setting, Under Voltage Setting, Over Current Setting, Leakage Setting, Restart Time Setting).
3. Tryk på SET knap again to select a setting.
4. Brug Op/Ned knapper for at justere værdien.
5. Tryk på SET knap to confirm the new value and move to the next setting, or wait for a few seconds for the device to automatically save and exit the settings menu.

Refer to the "Screen Display Examples" in Section 3.3 for visual guidance on different settings.

7. Smarte funktioner

7.1 Fjernbetjening via app

Once the EKW-63 is paired with the Tuya Smart or Smart Life app, you can:

• Turn the device on/off remotely.
• View realtidsvolumentage, current, power, and energy consumption (kWh).
• Access historical energy consumption data (daily, monthly, yearly statistics).
• Adjust protection parameters (over-voltage, under-bindtage, over-current, leakage) from the app.
• Set up schedules, countdowns, and loop timings.

7.2 Integration af stemmestyring

The EKW-63 supports voice commands through Amazon Alexa and Google Assistant. To enable this:

1. Forbind din Tuya Smart/Smart Life-konto med din Amazon Alexa- eller Google Home-app.
2. Discover new devices. Your EKW-63 should appear.
3. Du kan nu bruge stemmekommandoer som:
   • "Alexa, tænd for [Enhedsnavn]."
   • "Hej Google, sluk [Enhedsnavn]."
   • "Alexa, what is the power consumption of [Device Name]?" (Functionality may vary based on voice assistant integration).

7.3 tidsindstillinger

The app allows for flexible scheduling:

• Timingstilstand: Set specific times for the device to turn on or off daily or on selected days.
• Nedtællingstilstand: Set a timer for the device to turn off after a specified duration.
• Cyklustiming: Configure the device to repeatedly turn on and off for set intervals.

8. Vedligeholdelse

The EKW-63 is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity:

• Rensning: Periodically wipe the device with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
• Tilslutningskontrol: Annually, or if you suspect an issue, ensure all wiring connections are still tight and secure. Always disconnect power before checking connections.
• Firmwareopdateringer: Check the Tuya Smart/Smart Life app periodically for any available firmware updates for the device. Updates can improve performance and add new features.

9. Fejlfinding

If you encounter issues with your EKW-63, try the following steps:

• Enheden tænder ikke:
  • Check the main circuit breaker to ensure power is supplied to the device.
  • Kontroller, at alle ledningsforbindelser er korrekte og sikre.
• No WiFi Connection / Device Offline:
  • Ensure your WiFi router is powered on and functioning correctly.
  • Confirm your WiFi network is 2.4GHz. The device does not support 5GHz networks.
  • Check the distance between the device and your WiFi router. Signal strength might be an issue.
  • Prøv at parre enheden med appen igen (se afsnit 5.2).
  • Restart your WiFi router and the EKW-63 device (by cycling power).
• Protection Trip (Device Turns Off Unexpectedly):
  • Check the display for error codes or indications (e.g., "OV" for over-voltage, "UV" for under-voltage, "OC" for over-current, "LEAK" for leakage).
  • Identify if the connected load is drawing too much current or if there's a voltage fluctuation or earth leakage fault.
  • Adjust protection thresholds if necessary, but ensure they are within safe operating limits for your circuit.
• App Not Responding / Delayed Control:
  • Sørg for, at din smartphone har en stabil internetforbindelse.
  • Check if the Tuya Smart/Smart Life app is updated to the latest version.
  • Luk og åbn appen igen.

10. Brugertips

• Optimal WiFi-placering: For reliable smart functionality, ensure the EKW-63 is installed in a location with good 2.4GHz WiFi signal strength. If your electrical panel is in a basement or garage, consider a WiFi extender.
• Regelmæssig overvågning: Utilize the app's energy monitoring features regularly to identify power-hungry appliances and optimize your energy usage.
• Smart sceneautomatisering: Explore the "Scenes" or "Automation" features within the Tuya Smart/Smart Life app to create advanced rules, such as turning off specific circuits when you leave home or if energy consumption exceeds a certain threshold.
• Beskyttelsesindstillinger: While the device offers adjustable protection, always set thresholds based on the specifications of your connected appliances and local electrical standards to prevent damage or hazards.

11. Garanti og support

For warranty information and technical support, please contact the seller or the manufacturer, ETEK, directly. Keep your purchase receipt as proof of purchase.

Mærke: ETEK

Model: EKW-63