Kllisre DDR4 SO-DIMM Laptop Memory Module

Indledning

The Kllisre DDR4 SO-DIMM Laptop Memory Module is designed to upgrade and enhance the performance of compatible laptops. This module offers a capacity of 16GB and operates at speeds of either 2666MHz or 3200MHz, providing improved responsiveness and smoother operation for your computer. It features a low operating voltage of 1.2V, contributing to long-term efficiency and stable performance.

Figure 1: Kllisre DDR4 SO-DIMM memory module with its retail packaging.

Opsætning og installation

Upgrading your laptop's memory is a straightforward process that can significantly increase its performance. Please follow these general steps for installation. Always refer to your laptop's specific service manual for detailed instructions on accessing and installing RAM.

1. Kompatibilitetskontrol: Before installation, ensure that the Kllisre DDR4 SO-DIMM module is compatible with your laptop's specifications. This includes checking the memory type (DDR4), form factor (SO-DIMM), and supported frequency (2666MHz or 3200MHz). The module is compatible with both Intel and AMD platforms.
2. Sluk og afbryd: Completely shut down your laptop and disconnect it from all power sources, including the AC adapter and battery.
3. Discharge Static Electricity: Touch a grounded metal object (e.g., an unpainted metal pipe or a metal part of your computer chassis) to discharge any static electricity from your body. Static electricity can damage electronic components.
4. Adgangshukommelsespladser: Open your laptop's memory compartment. This usually involves removing a panel on the bottom of the laptop. Consult your laptop's manual for exact instructions.
5. Fjern gamle moduler (hvis relevant): If you are replacing existing memory, gently push apart the small clips on either side of the memory module. The module will pop up at an angle. You can then pull it out of the slot.
6. Installer nyt modul: Align the notch on the Kllisre SO-DIMM module with the key in the memory slot. Insert the module firmly into the slot at a 45-degree angle.
7. Sikkert modul: Push the module down until the clips on both sides snap into place, securing the module horizontally.
8. Saml igen: Close the memory compartment, reattach the battery, and reconnect the AC adapter.

Figure 2: The Kllisre DDR4 SO-DIMM module features high compatibility, original chips, and strong contact stability.

Figure 3: The Kllisre DDR4 SO-DIMM module is compatible with both Intel and AMD platforms.

Betjeningsvejledning

Once correctly installed, the Kllisre DDR4 SO-DIMM memory module operates automatically with your laptop's system. The operating system will detect the new memory, and it will be utilized to improve overall system performance.

• Automatisk registrering: Upon booting your laptop after installation, the system's BIOS/UEFI and operating system should automatically detect the newly installed memory.
• Ydeevneforbedring: The increased memory capacity and speed will allow your laptop to handle more applications simultaneously, run demanding software more efficiently, and improve overall system responsiveness.

Figure 4: The memory module increases computer responsiveness by up to 30% and supports speeds up to 3200MHz.

Opretholdelse

Memory modules generally require minimal maintenance. However, following these guidelines can help ensure their longevity and optimal performance:

• Hold rent: When handling, ensure your hands are clean and free of oils or dirt. Avoid touching the gold contacts on the module.
• Statisk forebyggelse: Always take anti-static precautions (e.g., using an anti-static wrist strap or touching a grounded metal object) when handling memory modules to prevent damage from electrostatic discharge.
• Miljøforhold: Store and operate the memory in a cool, dry environment, away from extreme temperatures and humidity.

Fejlfinding

If you encounter issues after installing the memory module, consider the following troubleshooting steps:

• Ingen opstart/sort skærm:
  • Ensure the memory module is seated correctly in its slot. Remove and re-insert it firmly.
  • If multiple modules are installed, try booting with only one module at a time to identify a potentially faulty module.
  • Check your laptop's compatibility list to ensure the memory module is supported.
• Systemustabilitet/nedbrud:
  • Kør et hukommelsesdiagnosticeringsværktøj (f.eks. Windows Memory Diagnostic eller MemTest86) for at kontrollere for fejl.
  • Ensure your laptop's BIOS/UEFI is updated to the latest version, as this can sometimes improve memory compatibility.
• Incorrect Memory Reported:
  • Verify that the operating system is 64-bit to fully utilize 16GB of RAM.
  • Check BIOS/UEFI settings to confirm the memory is detected correctly.

Specifikationer

Figure 5: Kllisre DDR4 SO-DIMM memory module, designed for laptop speed upgrades.

Figure 6: The module operates at a low 1.2V, ensuring low power consumption and stable performance.

Garanti og support

The Kllisre DDR4 SO-DIMM Laptop Memory Module comes with a Tre-års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og sikrer pålidelig drift under normale brugsforhold.

For warranty claims or technical support, please contact the seller or retailer from whom you purchased the product. Provide your proof of purchase and a detailed description of the issue to facilitate the support process.

Brugertips

• Bekræft kompatibilitet: Always double-check your laptop's maximum supported RAM capacity and speed before purchasing and installing new modules.
• Håndteres med forsigtighed: Memory modules are sensitive electronic components. Handle them by the edges and avoid touching the gold contacts or the chips.
• BIOS-opdatering: If you experience compatibility issues, check if your laptop's manufacturer has a BIOS/UEFI update available. Sometimes, an updated BIOS can improve memory support.
• Farvevariation: Please note that the memory modules may come in different PCB colors (green, blue, or black). This is a cosmetic variation and does not affect performance or specifications.