Indledning
This manual provides comprehensive instructions for the safe operation, setup, and maintenance of your 4DRC Mini M3 RC Helicopter. The 4D-M3 is a compact and durable remote-controlled helicopter designed for both indoor and outdoor use, featuring a high-definition camera, altitude hold, and various flight modes including 3D aerobatics. Its robust design and intelligent control systems make it suitable for beginner operators.
Sikkerhedsoplysninger
- Advarsel: Ikke egnet til børn under 36 måneder på grund af små dele. Anbefalet alder er 14+ år.
- Brug altid helikopteren i åbne områder, væk fra mennesker, dyr og forhindringer.
- Flyv ikke i nærheden af højvolumentage-linjer, bygninger eller lufthavne.
- Sørg for, at batteriet er fuldt opladet før hver flyvning.
- Avoid flying in strong winds (Anti-wind Ability: <10km/h).
- Voksenopsyn anbefales for yngre operatører.
- Rør ikke ved propellerne, mens de drejer.
Pakkens indhold
Kontroller venligst pakken omhyggeligt for at sikre, at alle varer er til stede:
- 1 x 4DRC Mini M3 Helicopter
- 1 x fjernbetjening
- 1 x Body Battery (Rechargeable lithium battery)
- 4 x reserveblade
- 1 x skruetrækker
- 1 x nøgle
- 1 x USB ladekabel
- 1 x Brugsanvisning (denne manual)
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 4D-M3 |
| Produktdimensioner | 18 x 17 x 6 cm |
| Dronevægt | 49 g |
| Afgangsvægt | Omkring 70 g |
| Materiale | Metal, Plastic (High toughness explosion-proof materials) |
| Strømkilde | Elektrisk (lithiumbatteri) |
| Batteritype | 3.7V Lipo Battery |
| Opladningstid | Cirka 90 minutter |
| Flyvetid | 10-20 minutter |
| Fjernbetjening afstand | Cirka 80 meter |
| Fjernbetjeningssignal | 2.4G high frequency signal |
| Kontrolkanaler | 4 kanaler |
| Controller batteri | 3*AAA Battery (not included) |
| Motortype | Børste motor |
| Stiktype | USB oplader |
| Flyvesystem | Air pressure hover (Altitude Hold) |
| Kamera | HD wide-angle lens (1080p FHD, 720P HD, 4K UHD options available) |
| Kameramonteringstype | Fast kamerabeslag |
| Videooptagelsesopløsning | 1080p FHD, 720P HD, 4K UHD, Other |
| Funktioner | App-Controlled, FPV Capable, Wi-fi, 3D Aerobatics, One-key Take-off/Landing/Return, Gravity Sensing, Multi-speed |
| Operatørfærdighedsniveau | Nybegynder |
| Indendørs/Udendørs brug | Indendørs-Udendørs |
| Modvindsevne | <10 km/t |
| Certificering | CE |
| Anbefalet alder | 14+ år |
Opsætningsvejledning
- Charge the Helicopter Battery:
- Connect the helicopter's lithium battery to the USB charging cable.
- Sæt USB-kablet i en passende USB-strømkilde (f.eks. en computers USB-port eller en USB-vægadapter).
- Opladningsindikatoren viser opladningsstatussen. Opladningstiden er cirka 90 minutter.
- Lad ikke batteriet oplades uden opsyn.
- Installer batterier til fjernbetjeningen:
- Åbn batterirummet på bagsiden af fjernbetjeningen.
- Isæt 3 AAA-batterier (medfølger ikke), og sørg for korrekt polaritet (+/-).
- Luk batterirummet.
Image: The remote controller with a phone holder, indicating where batteries would be installed. - Installer propeller (hvis nødvendigt):
- If propellers are not pre-installed, attach them according to the markings (A and B) on the propellers and motor shafts. Use the provided wrench if needed.
- Ensure propellers are securely fastened but not overtightened.
- Tænd og parring:
- Placer helikopteren på en flad, jævn overflade.
- Turn on the helicopter's power switch. The indicator lights will flash.
- Tænd for fjernbetjeningen.
- Push the left joystick (throttle) all the way up, then all the way down. The remote controller will beep, and the helicopter lights will become solid, indicating successful pairing.
- App Download and Connection (for Camera/Advanced Features):
- Scan the QR code in the manual or search for the dedicated 4DRC app on your smartphone's app store (Google Play or Apple App Store).
- Installer og åbn appen.
- Turn on the helicopter. Go to your phone's Wi-Fi settings and connect to the Wi-Fi network broadcast by the helicopter (usually named "4DRC-XXXXXX").
- Open the 4DRC app. You should see the live camera feed, indicating a successful connection.
Betjeningsvejledning
Grundlæggende flyvekontrol
- Start/landing med én knap: After pairing, press the one-key take-off button on the remote controller to automatically lift off and hover. Press it again to land.
- Højdehold: The helicopter maintains a stable altitude automatically, making it easier for beginners to control.
- Gashåndtag (venstre joystick): Skub op for at stige op, træk ned for at stige ned.
- Retningskontrol (højre joystick): Push forward/backward to move the helicopter forward/backward. Push left/right to move left/right.
- Trimning: Use the trim buttons on the remote to fine-tune the helicopter's stability if it drifts in any direction.
Avancerede funktioner
- Hastighedstilstande: The helicopter offers 3 speeds. Use the speed switch button on the remote to cycle through low, medium, and high speeds.
- 360° Stunt Rolls: Press the stunt roll button and then push the right joystick in any direction to perform a 360-degree flip.
- One-key return: Press the one-key return button to make the helicopter fly back towards the remote controller.
App Control (Wi-Fi FPV)
- Real-time Video (FPV): Once connected to the app via Wi-Fi, you can view the live camera feed directly on your smartphone.
- Tyngdekraftsføling: Control the helicopter's flight direction by tilting your smartphone.
- Baneflyvning: Draw a flight path on your smartphone screen, and the helicopter will automatically follow the designated trajectory.
- Foto-/videooptagelse: Use the app interface to capture photos and record videos directly to your smartphone.
Opretholdelse
- Rensning: Use a soft, dry cloth to clean the helicopter and remote controller. Do not use water or chemical cleaners.
- Propelpleje: Regularly check propellers for damage (bends, cracks). Replace damaged propellers immediately using the provided spare blades and wrench.
- Batteriopbevaring: For long-term storage, charge the battery to about 50% and store it in a cool, dry place. Do not store fully charged or fully discharged batteries for extended periods.
- Motorpleje: Keep motors free from dust and debris to ensure optimal performance.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Helikopteren reagerer ikke på fjernbetjeningen. | Not paired; low battery in remote or helicopter. | Re-pair the helicopter and remote. Check and replace/charge batteries. |
| Helikopteren driver afsted under flyvning. | Needs trimming; uneven surface during take-off. | Use trim buttons on the remote. Ensure helicopter is on a flat surface for take-off. |
| Camera feed is not visible on phone app. | Wi-Fi not connected; app not open. | Ensure phone is connected to the helicopter's Wi-Fi network. Open the 4DRC app. |
| Kort flyvetid. | Batteriet er ikke fuldt opladet; gammelt batteri. | Ensure battery is fully charged (approx. 90 mins). Consider replacing the battery if it's old. |
| Helikopter styrter let ned. | Strong wind; operator skill level. | Fly in calm conditions. Practice basic controls in low-speed mode. |
Brugertips
- For optimal stability, always launch the helicopter from a flat, level surface.
- Beginners should start with the lowest speed setting to get accustomed to the controls.
- When flying indoors, be mindful of obstacles and ensure sufficient space.
- Regularly check propeller guards for any damage to prevent accidents.
- Experiment with the gravity sensing feature in the app for a different control experience.
Garanti og support
The 4DRC Mini M3 RC Helicopter comes with a 15-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For technical support, warranty claims, or any questions regarding your product, please contact the seller or manufacturer directly through your purchase platform.
