Indledning
The TESLONG TD300P Articulating Borescope is a high-performance industrial endoscope designed for detailed visual inspection in hard-to-reach areas. Featuring a 5.5mm diameter, 2-way articulating probe, a 5-inch IPS display, and 1080P recording capabilities, it is an essential tool for automotive, industrial, and home maintenance tasks. This manual provides instructions for the proper setup, operation, and maintenance of your device.
Pakkens indhold
Kontroller venligst, at alle nedenstående varer er inkluderet i din pakke:
- TESLONG TD300P Endoscope Unit
- 5.5mm Articulation Probe (1.55m / 5ft)
- Bærbar bæretaske
- USB Type-C opladerkabel
- Brugermanual
- 32 GB MicroSD-kort
Produkt overview
Familiarize yourself with the main components and controls of the TD300P borescope:
- Power knap: Tænder eller slukker for enheden.
- OK knap: Bekræfter valg eller handlinger.
- Up/Zoom Button: Navigates up in menus or zooms in during live view.
- Down/Rotate Button: Navigates down in menus or rotates the image during live view.
- Adjust Light Brightness Button: Controls the intensity of the LED lights on the probe.
- Mode Switch knap: Toggles between photo, video, and playback modes.
- Indstillingsknap: Accesses the device settings menu.
- Capture Image/Take Video Button: Initiates photo capture or video recording.
- Probe-joystick: Controls the 2-way articulation of the probe tip.
- MicroSD -kortplads: For inserting the included 32GB MicroSD card for storage.
- Charging / Data Port (USB-C): Til opladning af enheden og overførsel af data til en computer.
Opsætning
- Oplad enheden: Connect the borescope to a power source using the provided USB Type-C charging cable. The 3000mAh lithium battery provides up to 5 hours of operation and supports use while charging.
- Indsæt MicroSD-kort: Locate the MicroSD card slot and insert the included 32GB MicroSD card. This card is essential for saving photos and videos.
- Fastgør sonden: Securely connect the 5.5mm articulating probe to the main unit. Ensure it is firmly seated to prevent disconnections during use.
Betjeningsvejledning
Tænd/sluk
- Tryk og hold på Power knap for at tænde eller slukke for enheden.
Levende View og Navigation
- Once powered on, the device will enter live view mode, displaying the camera feed on the 5-inch IPS screen.
- Brug Up/Zoom Button to zoom in on the image.
- Brug Down/Rotate Button to rotate the image on the screen.
Adjusting Probe Articulation
The 2-way articulating probe allows for precise control of the camera's viewvinkel:
- Brug Probe-joystick to maneuver the probe tip up to 210° in two directions. This allows you to navigate around obstacles and view different angles within an inspection area.
Justering af LED-lysstyrke
- Tryk på Adjust Light Brightness Button to cycle through the 3-step brightness levels of the 6 high-brightness LED lights. This helps illuminate dark inspection areas effectively.
Optagelse af billeder og videoer
- Tryk på Mode Switch-knap to select between photo mode (camera icon) or video mode (video camera icon).
- I fototilstand skal du trykke på Capture Image/Take Video Button én gang for at tage et stillbillede.
- I videotilstand skal du trykke på Capture Image/Take Video Button once to start recording, and press again to stop recording.
- All captured media is saved to the inserted 32GB MicroSD card.
Adgang til indstillinger
- Tryk på Indstillingsknap for at gå ind i systemindstillingsmenuen.
- Brug Up/Zoom og Ned/Roter buttons to navigate through options like Resolution, Sound Recording, Date/Time, Language Setting, Temperature Unit, Format, and Automatic Shut-down.
- Tryk på OK knap for at bekræfte valg.
Overførsel af data
- Connect the borescope to your PC using the USB Type-C cable.
- The device will appear as a removable storage device, allowing you to transfer photos and videos.
Opretholdelse
- Rengøring af sonden: The probe is IP67-rated waterproof, making it suitable for wet and oily environments. After use, gently wipe the probe with a soft, damp cloth. For stubborn grime, a mild detergent can be used, followed by a clean water rinse and thorough drying. Do not immerse the main unit in water.
- Batteripleje: For at forlænge batteriets levetid bør du undgå at aflade batteriet helt ofte. Oplad enheden regelmæssigt, især hvis den skal opbevares i længere tid.
- Opbevaring: Always store the borescope and its accessories in the provided portable carrying case to protect it from dust, impacts, and environmental damage.
- Temperaturovervågning: The probe has a built-in smart temperature sensor to prevent overheating. If the temperature exceeds 70°C (158°F), a warning will appear. If it reaches 80°C (176°F), the device will automatically shut down to prevent damage. The normal working temperature range is 40-50°C (104-122°F).
Fejlfinding
- Enheden tænder ikke: Ensure the battery is charged. Connect the device to a power source and try again. If the issue persists, contact support.
- Intet billede på skærmen: Check if the probe is securely connected. Ensure the device is in live view mode.
- Probe not articulating: Verify that the probe joystick is functioning correctly. Ensure there are no physical obstructions preventing articulation.
- Kan ikke overføre files til pc: Ensure the USB-C cable is properly connected to both the borescope and the computer. Check if the computer recognizes the device as a removable drive. Try a different USB port or cable.
- Billedkvaliteten er dårlig: Adjust the LED brightness. Clean the camera lens on the probe tip. Ensure the object is within the optimal depth of field (3-8 cm).
Specifikationer
| Feature | Specifikation |
|---|---|
| Probtype | 2-Way Articulating |
| Max Articulating Angle | 210° |
| Sondediameter | Φ5.5 mm (0.21 inch) |
| Probe Length | 1.5 m (5 fod) |
| Probe kabel | Fleksibel svanehals |
| Optimal Depth of Field | 3~8 cm (0.9~3.2 inch) |
| Felt af View | 75° |
| Belysning | 6 High Brightness LEDs (3-step adjustable) |
| Skærm | 5-inch IPS LCD HD WVGA Color Screen |
| Stillbilledopløsning | 1920 × 1080 pixels |
| Videooptagelsesopløsning | 1280 × 720 pixels |
| Batteri | 3000mAh Lithium Battery (up to 5 hours operation) |
| Driftstemperatur | 0°C til 45°C (32°F til 113°F) |
| Vandtæt vurdering | IP67 (kun probe) |
| Opbevaring | 32GB MicroSD Card (included) |
| Forbindelse | USB-C til opladning og dataoverførsel |
| Forstørrelse | Fixed 1.3x and 1.5x |
Brugertips
- Maximize Articulation: The 2-way articulation is a key feature. Practice using the joystick to fully utilize its 210° range for navigating complex internal structures and getting the best viewvinkel.
- Optimal belysning: Always adjust the LED brightness to suit the environment. Too much light can cause glare, while too little will obscure details. Experiment with the three brightness levels.
- Fokusafstand: For the clearest images, ensure the object you are inspecting is within the optimal depth of field of 3-8 cm (0.9-3.2 inches).
- Probe diameter: The 5.5mm probe is very thin, making it ideal for tight spaces. Always confirm the opening size before inserting the probe to avoid damage.
- Regelmæssig rengøring: Even though the probe is waterproof, regular cleaning after each use, especially in dirty or oily conditions, will maintain image clarity and prolong the life of the device.
Garanti og support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Teslong webwebstedet. Behold din købskvittering som købsbevis.
