Indledning
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your new replacement remote control for Mitsubishi air conditioners. This remote is compatible with various Mitsubishi models, including SG17B, SG15H, SG15D, SG15J, XG18A, XG16A, SG19C, SG17S, SH20A, and MSZ-GL25VGD. Each remote is tested before delivery to ensure perfect functionality.
Opsætning
1. Installation af batterier
The remote control requires batteries (not included). Open the battery compartment cover on the back of the remote and insert the correct type and number of batteries, observing the polarity markings (+/-).
2. Parring med dit klimaanlæg
To ensure proper communication with your Mitsubishi air conditioner, follow these steps to set the remote control code:
- Aim the remote control directly at the signal receiver on your air conditioner unit.
- Tryk og hold på MAGT button (often combined with OFF/ON).
- Mens du holder MAGT knappen, tryk enten på TEMP + or TEMP - button to cycle through the available codes.
- Observe your air conditioner. When it reacts (e.g., makes a sound, turns on/off, or changes mode), release the MAGT knap.
- Tryk på OFF/ON button again to confirm the selected code.
- Test various functions to ensure the remote is fully operational. If functions do not work correctly, repeat the pairing process.
Betjeningsvejledning
Once paired, your remote control allows you to manage various functions of your Mitsubishi air conditioner. Ensure a clear line of sight between the remote and the air conditioner's receiver.
Grundlæggende funktioner:
- SLUK TÆND: Tænder eller slukker klimaanlægget.
- TEMP + / TEMP -: Justerer den ønskede temperatur.
- KØRSELSVEJLEDNING: Skifter mellem driftstilstande (f.eks. Køling, Varme, Ventilator, Tørring, Auto).
- VENTILATOR: Justerer ventilatorhastigheden (f.eks. Lav, Mellem, Høj, Auto).
Advanced Functions (under sliding cover):
- ECONO COOL: Aktiverer energibesparende køletilstand.
- MAGTFULDE: Engages a rapid cooling/heating function for quick temperature changes.
- SMART SÆT: Recalls preferred settings.
- NATURLIG FLOW: Simulates natural airflow.
- WIDE VANE: Justerer den vandrette luftstrømsretning.
- L-VANE: Justerer den vertikale luftstrømsretning.
- INJECT/DIRECT: Controls airflow direction.
- SOVE: Aktiverer dvaletilstand for komfortabel drift om natten.
- UGENTLIG TIMER: Programs on/off times for each day of the week. Use EDIT/SEND at sætte, OPHÆVE at rydde.
- TIL/FRA (Timer): Sets specific on/off times.
- DAG: Selects the day for timer settings.
- TID: Justerer tiden for timerindstillinger.
- SLET: Removes programmed timer settings.
- NULSTIL: Resets the remote control to factory defaults.
- UR: Indstiller det aktuelle klokkeslæt på fjernbetjeningens display.
- SÆT: Confirms timer or clock settings.
The LCD screen on the remote displays current settings such as temperature, operating mode, fan speed, and clock time.
Opretholdelse
Udskiftning af batteri:
- Udskift batterierne, når fjernbetjeningens display bliver svagt, eller fjernbetjeningen ikke reagerer.
- Always use new batteries of the specified type and replace all batteries at the same time.
- Bland ikke gamle og nye batterier eller forskellige typer batterier.
- Fjern batterierne, hvis fjernbetjeningen ikke skal bruges i længere tid, for at forhindre lækage.
Rensning:
- Tør fjernbetjeningen af med en blød, tør klud.
- Do not use liquid cleaners, abrasive cleaners, or chemical sprays, as these can damage the remote.
Opbevaring:
- Opbevar fjernbetjeningen et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Undgå at tabe fjernbetjeningen eller udsætte den for for meget fugt.
Fejlfinding
Fjernbetjeningen reagerer ikke:
- Tjek batterier: Sørg for, at batterierne er korrekt isat og har tilstrækkelig opladning. Udskift dem om nødvendigt.
- Synslinje: Make sure there are no obstructions between the remote and the air conditioner's receiver.
- Genpar fjernbetjening: If the remote is unresponsive or functions incorrectly, repeat the pairing process described in the "Setup" section. The instructions on the back of the remote state: "Please set the remote control at the signal receiver on the air conditioner. Press and hold power button. Press 'TEMP +' or 'TEMP -' to change code. Press 'OFF/ON' again to confirm the code. When the air conditioner reacts."
- Nulstil fjernbetjening: If issues persist, try pressing the NULSTIL button (usually a small recessed button requiring a pointed object like a paperclip).
Specifikke funktioner virker ikke:
- After pairing, test all functions. If certain functions do not work, it may indicate an incorrect code. Repeat the pairing process to find the correct code for your specific air conditioner model.
- Ensure your air conditioner model supports the specific function you are trying to use.
Hvis fejlfindingstrinene ikke løser problemet, bedes du kontakte kundesupport for yderligere assistance.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | SG17B (Compatible with SG15H, SG15D, SG15J, XG18A, XG16A, SG19C, SG17S, SH20A, MSZ-GL25VGD) |
| Frekvens | 433 MHz |
| Kanal | 1 |
| Trådløs kommunikation | IR (infrarød) |
| Bruge | Aircondition |
| Oprindelse | Fastlandet Kina |
| Pakkevægt | 0.2 kg |
| Pakkedimensioner (L x B x H) | 15 cm x 10 cm x 5 cm |
Brugertips
- Verify All Functions: After successfully pairing the remote, take a moment to test all buttons and modes (e.g., cooling, heating, fan speeds, special functions like ECONO COOL or SLEEP) to ensure full compatibility with your specific air conditioner model.
- Opvarmningsfunktion: A user asked about the heating function. If your air conditioner supports heating, ensure you cycle through the MODE button options until the heating mode is displayed on the remote's screen and the unit responds accordingly. If it doesn't appear, your specific AC unit or the remote's current code might not support it.
- Keep Original Remote (if available): It's always a good idea to keep your original remote control as a backup or for reference, especially during initial setup.
Garanti og support
Garanti:
This product comes with a 3-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the remote control functions as intended under normal use.
Kundesupport:
Should you encounter any issues or have questions regarding the operation or compatibility of your remote control, please refer to the troubleshooting section first. If the problem persists, please contact the seller or customer support for assistance. When contacting support, please provide your product model number and a detailed description of the issue.
