Indledning
The SONICAKE A Factory pedal is a powerful acoustic instrument preamp designed to enhance the sound of your acoustic guitar, violin, mandolin, and other acoustic instruments. It features a high impedance input and an XLR balanced output, ensuring optimal signal integrity. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your A Factory pedal.
Figur 1: Forside view of the SONICAKE A Factory pedal, showing all controls and footswitches.
Opsætning
Follow these steps to properly set up your SONICAKE A Factory pedal:
- Strømtilslutning: Connect a DC 9V power adapter (5.5×2.1mm, center negative, 60mA) to the DC 9V input jack on the pedal. Ensure the power adapter meets these specifications to prevent damage.
- Instrumentindgang: Connect your acoustic instrument to the "INPUT" jack on the pedal using a standard 1/4-inch instrument cable. The pedal features a high impedance input suitable for various acoustic pickups.
- Udgangsforbindelse:
- For at oprette forbindelse til en amplifier or other pedals, use the 1/4-inch "OUTPUT" jack.
- For connecting to an audio interface or mixer, use the XLR balanced "XLR OUT" jack. This provides a clean, balanced signal for recording or live sound applications.
- Jordløft: The pedal includes a ground lift feature to eliminate ground noise. If you experience hum or buzzing, try engaging the ground lift switch located near the XLR output.
Figure 2: Diagram showing the DC 9V central negative power connection for the pedal.
Betjeningsvejledning
The A Factory pedal offers a range of controls to shape your acoustic tone:
Kontrolelementer:
Kontrollere Fungere HAK Adjusts the gain of the Notch Filter. Use this to quickly eliminate whistling feedback. N.FREQ Adjusts the frequency range of the Notch Filter. Fine-tune your tone or eliminate unwanted feedback. BIND Styrer pedalens samlede udgangsvolumen. DISKANT Adjusts the high-frequency response of the 3-Band EQ. R.MIX Controls the mix level of the digital reverb effect. R.DECAY Controls the duration of the digital reverb effect. BASS Adjusts the low-frequency response of the 3-Band EQ. I MIDTEN Adjusts the mid-frequency response of the 3-Band EQ. 
Figur 3: Nærbillede view of the Notch Filter controls (NOTCH and N.FREQ).
Fodkontakter:
- REVERB fodkontakt: Tap to switch the reverb effect on or off.
- HOLD FOR MUTE: Press and hold the REVERB footswitch to activate the mute function. This is useful for silent tuning or changing instruments.
- PREAMP Fodkontakt: Aktiverer eller deaktiverer forvalgetamp section of the pedal.
Figure 4: Illustration of the REVERB footswitch and its "Hold for Mute" function.
Buffer bypass:
The A Factory pedal features a special design buffer bypass circuit. This ensures that your instrument's pristine sound is maintained even when the pedal is disengaged, preventing signal degradation over long cable runs or through multiple pedals.
Figure 5: Visual representation highlighting the buffer bypass feature.
Produktdemonstrationsvideo:
Video 1: A demonstration of the SONICAKE A Factory pedal's sound and features with an acoustic guitar.
Opretholdelse
To ensure the longevity and optimal performance of your A Factory pedal, follow these maintenance guidelines:
- Rensning: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
- Opbevaring: Opbevar pedalen et køligt, tørt sted væk fra direkte sollys, ekstreme temperaturer og høj luftfugtighed.
- Håndtering: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the internal circuitry or the aluminum-alloy casing.
Figure 6: The robust aluminium-alloy casing of the pedal, designed for durability.
Fejlfinding
If you encounter any issues with your A Factory pedal, refer to the following common troubleshooting tips:
- Ingen lyd:
- Kontrollér alle kabelforbindelser (indgang, udgang, strøm).
- Ensure the power adapter is correctly connected and providing the specified DC 9V, center negative power.
- Bekræft at dit instrument og amplifier fungerer korrekt.
- Check if the MUTE function is accidentally engaged (hold the REVERB footswitch to disengage).
- Brummen eller summende støj:
- Engage the ground lift switch near the XLR output.
- Prøv en anden stikkontakt eller strømforsyning.
- Sørg for, at alle kabler er i god stand og korrekt afskærmet.
- Effekt ikke engagerende:
- Ensure the respective footswitch (REVERB or PREAMP) is pressed firmly.
- Check the control knobs for the effect (R.MIX, R.DECAY) to ensure they are not set to zero.
Hvis problemet fortsætter, bedes du kontakte SONICAKES kundesupport for yderligere assistance.
Specifikationer
| Feature | Detalje |
|---|---|
| Indgangsimpedans | 10M Ohms |
| Udgangsimpedans | 100 Ohm |
| XLR Output Impedance | 100 Ohm |
| Strømbehov | DC 9V, 5.5×2.1mm center negative, 60mA (Power adapter not included) |
| Mål (D x B x H) | 124 mm x 90 mm x 54.8 mm |
| Vægt | 392 g |
| Casing Materiale | Aluminium-alloy |
| Lydudgangseffekter | rumklang |
| Kontroltype | Pedal |
Garanti og support
For warranty information, technical support, or any other inquiries, please refer to the official SONICAKE webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
This product includes a user manual in the package. Please refer to it for additional details and specific instructions.
