USAFEQLO H.265 Max 12MP NVR Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your USAFEQLO H.265 Max 12MP Network Video Recorder (NVR). This NVR supports high-resolution video recording up to 12MP and advanced AI features such as Face, Human, and Vehicle Detection. It is designed for robust and efficient surveillance in various environments.

2. Pakkens indhold

Tjek venligst pakken for følgende varer:

• 1 x USAFEQLO NVR Unit (Supports fan, LED indicators, front USB)
• 1 x USB-mus
• 1 x strømadapter (12V/2A)
• 1 x Quick Manual for APP

Note: An HDD (Hard Disk Drive) is not included unless specified at purchase. WiFi adapter is also not included and must be purchased separately if needed.

3. Produktet er slutview

3.1. Frontpanel

• Record LED: Angiver optagelsesaktivitet.
• Power LED: Indikerer strømstatus.
• Alarm LED: Indicates alarm events.
• Infront USB: For connecting a mouse or USB storage devices.
• Køleventilator: Til varmeafledning.

3.2. Rear Panel and Dimensions

• USB-porte (x2): For connecting a mouse, USB storage, or WiFi adapter.
• LAN Port (RJ45 10/100M): Til netværksforbindelse.
• HDMI-port: Video output up to 4K resolution.
• VGA port: Video output up to 1920*1080P.
• DC12V: Strømindgang.
• 3.5mm Mic/SPK: Lydindgang/-udgang.
• A-UD: Lydudgang.
• HD-port: Hard drive interface.

Dimensioner: 200mm x 200mm x 45mm (Case)

3.3. Top og bund Views

4. Opsætning

4.1. Installation af harddisk (valgfrit)

If your NVR did not come with a pre-installed HDD, you will need to install one for recording. The NVR supports one SATA HDD up to 14TB. 32CH and 36CH models offer two HDD interfaces but only one can be installed within the case.

1. Unscrew and remove the NVR's top cover.
2. Tilslut SATA-data- og strømkablerne fra NVR'en til harddisken.
3. Fastgør harddisken til NVR-kabinettet med de medfølgende skruer.
4. Sæt topdækslet på igen, og fastgør det med skruer.

4.2. Indledende forbindelser

1. Tilslut kameraer: Connect your IP cameras to the same network as the NVR. Ensure cameras are powered on.
2. Video output: Tilslut en skærm til NVR'ens HDMI- eller VGA-port.
3. Mus: Connect the included USB mouse to any USB port on the NVR.
4. Netværk: Tilslut et Ethernet-kabel fra NVR'ens LAN-port til din router eller netværksswitch.
5. Magt: Connect the 12V/2A power adapter to the NVR's DC12V input and plug it into a power outlet. The NVR will power on automatically.

5. Betjeningsvejledning

5.1. Accessing the NVR Interface

You can access and manage your NVR through several methods:

• Local Monitor: Use the connected monitor and mouse to navigate the NVR's graphical user interface.
• PC Software (VMS/CMS): Install the VMS/CMS software on your computer for advanced management.
• Mobile App (XMeye/iCSEE): Download and install the XMeye or iCSEE app on your smartphone for remote viewing og kontrol.
• Lokal Webwebsted: Access the NVR via a web browser on your local network by entering its IP address (e.g., 192.168.x.xxx).
• Fjern Webwebsted: Access the NVR remotely via www.xmeye.net.

5.2. Basic Navigation and Settings

The NVR's graphical interface is intuitive. Use the mouse to navigate through menus such as System, Alarm, Record Config, Playback, Network, and Advanced settings.

5.3. Language Configuration

The NVR supports up to 28 languages. To change the language:

1. Navigate to the System settings.
2. Find the Language option and select your preferred language from the list.

Note: For 10CH/16CH models, if your desired language is not available, you may need to contact the seller for a firmware update.

5.4. Channel Configuration and Display

The NVR supports various channel configurations:

• 10CH NVR: Max support 10PCS 12MP Cameras.
• 16CH NVR: Max support 16PCS 12MP Cameras.
• 32CH NVR: Max support 32PCS 12MP Cameras.
• 36CH NVR: Max support 36PCS 12MP Cameras.

You can select the number of channels to display on your monitor (e.g., 1, 4, 8, 9, 16, 25, 36 views) through the preview indstillinger.

5.5. Advanced Features: AI Detection

The NVR supports advanced AI detection features:

• Menneskelig detektion: Triggers alarms when a human figure is detected.
• Ansigtsgenkendelse: Identifies faces in the video feed.
• Registrering af køretøjer: Triggers alarms when a vehicle is detected.

Important: Face Detection and Human Detection cannot operate simultaneously. All AI detection features (Face, Human, Motion, Vehicle) require compatible cameras that support these functions and must use the same program/firmware to work correctly.

5.6. Video Compression (H.265)

The NVR utilizes H.265/H.264 video compression. H.265 (HEVC) offers significant advantages over H.264, including:

• Approximately 50% reduction in hard disk space usage for the same video quality.
• Improved bandwidth efficiency.

Note: For H.265 compression to function, your cameras must also support H.265 and be configured accordingly.

6. Specifikationer

7. Vedligeholdelse

7.1. Almen pleje

• Keep the NVR in a well-ventilated area to prevent overheating. The built-in fan assists with heat dissipation.
• Avoid exposing the NVR to extreme temperatures, humidity, or direct sunlight.
• Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners.
• Sørg for, at alle kabelforbindelser er sikre.

7.2. Harddiskstyring

• Regularly check the status of your HDD through the NVR's system settings to ensure proper functioning.
• If the HDD is full, the NVR will typically overwrite the oldest recordings. Configure recording settings (e.g., motion detection, scheduled recording) to optimize storage usage.
• Back up important footage to external USB storage or network storage periodically.

8. Fejlfinding

• Ingen videoudgang: Check HDMI/VGA cable connections. Ensure the monitor is on and set to the correct input. Try a different cable or monitor.
• NVR tænder ikke: Verify the power adapter is correctly connected to the NVR and a working power outlet.
• Ingen optagelse: Check if an HDD is installed and properly formatted. Verify recording schedules and motion detection settings. Ensure cameras are connected and streaming video.
• AI Features (Face/Human/Vehicle Detection) Not Working: Confirm that your cameras support these specific AI functions. Ensure the camera firmware and NVR firmware are compatible and use the same program. Remember that Face and Human detection cannot work simultaneously.
• Problemer med fjernadgang: Ensure the NVR is connected to the internet. Check network settings (IP address, gateway, DNS). Verify port forwarding settings on your router if not using P2P (XMeye/iCSEE cloud service).
• H.265 Compression Not Working: Ensure all connected cameras support H.265 compression and are configured to use it.
• Cannot Find Desired Language: For 10CH/16CH models, contact the seller for specific language firmware updates if needed.
• Problemer med WiFi-forbindelse: Ensure you have a compatible MK7601 WiFi adapter. For 10CH/16CH models, a firmware update might be required to enable WiFi support. 32CH/36CH models typically support WiFi by default.

9. Brugertips

• Kamerakompatibilitet: Always verify that your IP cameras are compatible with the NVR, especially for advanced features like H.265 compression and AI detection. Using cameras from the same manufacturer or those explicitly listed as compatible can prevent issues.
• Netværksstabilitet: A stable network connection is crucial for optimal performance, especially for remote viewing and high-resolution streaming. Consider a wired Ethernet connection for the NVR for best results.
• Firmwareopdateringer: Periodically check for firmware updates from the manufacturer. Updates can improve performance, add new features, and fix bugs.
• Adgangskodesikkerhed: Change default passwords immediately after setup to enhance security. Use strong, unique passwords for your NVR and associated apps.

10. Garanti og support

For warranty information, technical support, or detailed manuals for the APP, PC software, or remote access, please contact your seller or refer to the official USAFEQLO support channels. Keep your purchase receipt as proof of purchase for any warranty claims.