1. Produktet er slutview
The ONEVAN 8 Inch Brushless Electric Chainsaw is a versatile and powerful cordless tool designed for various woodworking applications. It features a high-efficiency brushless motor, a digital power display for convenient battery monitoring, and a robust design for durability and safety.

Produktstruktur

- Olieflaske: For storing and dispensing chain lubricant.
- Digital strømindikator: Viser det aktuelle batteriniveau.
- Forbløffe: Protects against wood chip splash.
- Savkæde: High hardness alloy chain for efficient cutting.
- Låseknap: Safety mechanism to prevent accidental startup.
- Skridsikkert håndtag: Ergonomisk designet for sikkert greb.
- Tænd/sluk-knap: Styrer strømmen til motoren.
- Chain Adjusting Knob: For tensioning the saw chain.
2. Sikkerhedsoplysninger
Læs og forstå altid alle sikkerhedsadvarsler og instruktioner, før du bruger dette værktøj. Manglende overholdelse af advarsler og instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.
- Bær passende personlige værnemidler (PPE), herunder sikkerhedsbriller, handsker og høreværn.
- Sørg for, at arbejdsområdet er frit for forhindringer og tilskuere.
- Keep hands and body parts away from the saw chain when the tool is connected to a power source or operating.
- Always use the lock button to prevent accidental starting.
- Brug ikke motorsaven i våde forhold eller i nærheden af brandfarlige væsker eller gasser.
- Regularly inspect the chain for sharpness and tension.
3. Opsætning og montering
Installation af batteri
This chainsaw is adapted for Makita 18V B-series lithium batteries (e.g., BL1830, BL1850, BL1840, BL1840B, BL1850B). It is NOT compatible with DC18WA, BL1813G, BL1413G, G Series batteries (BL1813G, BL1413G, BL1415G, BL1430G, BL1815G), or 18V Ni-CD batteries (e.g., 1822).
- Ensure the chainsaw is turned off and the safety lock is engaged.
- Align the battery with the battery slot on the bottom of the chainsaw handle.
- Skub batteriet ind i åbningen, indtil det klikker sikkert på plads.
- For at fjerne batteriet skal du trykke på batteriets udløserknap og skubbe det ud.

Justering af kædespænding
Korrekt kædespænding er afgørende for sikker og effektiv drift. Kæden skal sidde tæt ind mod sværdet, men stadig kunne trækkes rundt med hånden.
- Locate the chain adjusting knob on the side of the chainsaw.
- Turn the knob to either "Loosen" or "Tighten" as needed to achieve the correct tension.
- Ensure the chain is not too loose (can derail) or too tight (can cause excessive wear and motor strain).

Oil Injection Device
The chainsaw features an oil injection device to lubricate the chain during operation, reducing friction and extending chain life. Oil is not included with the product.
- Unscrew the cap of the oil bottle located on the top of the chainsaw.
- Carefully pour appropriate chain lubricant into the reservoir.
- Sæt hætten sikkert på igen.
- During operation, press the oil button to discharge oil onto the chain as needed.

4. Betjeningsvejledning
Start af motorsaven
- Sørg for, at batteriet er fuldt opladet og sikkert installeret.
- Press and hold the safety lock button (located near the trigger).
- While holding the safety lock, press the On/Off switch (trigger) to start the chainsaw.
- Slip sikkerhedslåseknappen, når motorsaven kører.

Skæreteknikker
Always maintain a firm grip on the chainsaw with both hands. Position yourself securely and ensure the cutting path is clear.
- Logning: For cutting larger logs, ensure the log is stable and supported.
- Bamboo Felling: Cut bamboo close to the ground, being mindful of its spring-like properties.
- Orchard Pruning: Make clean cuts to promote healthy tree growth.
- Beskæring af grene: Support branches to prevent them from falling unexpectedly.

Digital Power Display
The integrated digital display shows the current battery charge level, allowing you to monitor power consumption and plan for battery changes or recharging.

Video demonstration
Watch this video for a visual guide on operating the ONEVAN 8 Inch Brushless Electric Chainsaw, including chain adjustment, oiling, and cutting demonstrations.
5. Vedligeholdelse
Generel rengøring
After each use, clean the chainsaw to remove sawdust, debris, and resin. Use a brush or compressed air. Ensure the ventilation holes are clear for proper heat dissipation.

Chain and Guide Bar Maintenance
- Smøring: Regularly check the oil level in the oil injection device and refill with appropriate chain lubricant.
- Spænding: Periodically check and adjust chain tension as described in the Setup section.
- Skarphed: A sharp chain is essential for safe and efficient cutting. Sharpen or replace the chain when it becomes dull.
- Inspektion: Inspect the chain and guide bar for any damage, wear, or burrs. Replace damaged components immediately.
Batteripleje
The ONEVAN 588VF battery is designed with multiple protections to ensure long-term work needs.

- Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- Udsæt ikke batterier for vand eller fugt.
- Charge batteries using only the provided charger.
- Avoid fully discharging lithium-ion batteries to prolong their lifespan.
6. Fejlfinding
- Motorsaven starter ikke:
- Kontroller, om batteriet er fuldt opladet og korrekt installeret.
- Ensure the safety lock button is pressed before engaging the trigger.
- Inspect battery terminals for corrosion or damage.
- Kæden skærer ikke effektivt:
- Kontroller kædespændingen; juster den, hvis den er for løs eller for stram.
- Ensure the chain is sharp. Sharpen or replace if dull.
- Verify that the oil injection device is working and the chain is lubricated.
- For kraftig vibration eller støj:
- Check chain tension and ensure it is correctly adjusted.
- Undersøg kæden og sværdet for skader eller slitage.
- Sørg for, at alle komponenter er forsvarligt fastgjort.
7. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærkenavn | ONEVAN |
| Modelnummer | OENVAN |
| Strømkilde | Battery (Makita 18V B-series compatible) |
| Motortype | Børsteløs motor |
| Magt | 4500W |
| Hastighed | 45000 RPM |
| Maks. Skærebredde | 30 cm |
| Guide Plate Size | 8 tommer |
| Kædehastighed | 10 m/s |
| Digital skærm | Power Digital Display Value (Battery Level) |
| Battery (Nominal) | 588VF |
| Batterikapacitet | 22900mAh/block |
| Vægt | 2.63 kg (uden batteri) |
| Certificering | CE |
| Oprindelse | Fastlandet Kina |
8. Garanti og support
Ved garantikrav, teknisk support eller serviceforespørgsler bedes du kontakte sælgeren eller producenten direkte. Gem din købskvittering som købsbevis.
This product may be eligible for free returns within 90 days. Please refer to the seller's return policy for details.
For information regarding product safety and privacy, please consult the seller's policies or contact customer service.
