Akko 3084B Plus ISO Nordic RGB Hot-Swap trådløst mekanisk gamingtastatur brugermanual

1. Introduktion

The Akko 3084B Plus is an 84-key ISO-Nordic layout mechanical gaming keyboard designed for versatility and performance. It features RGB per-key backlighting, multi-mode connectivity (wired USB, 2.4GHz wireless, and Bluetooth 5.0), hot-swappable switches, and programmable keys via the Akko Cloud Driver software. Its compact 85% form factor makes it suitable for users seeking a minimal and clean desk setup.

2. Opsætningsvejledning

2.1. Pakkens indhold

Før du begynder, skal du sørge for, at alle varer er til stede i kassen:

• 1 x Akko 3084B Plus Keyboard
• 1 x Keycap aftrækker
• Extra Novelty Keycaps
• 1 x Aftrækker
• 1 x Type-C kabel
• 1 x Plastic Dust Cover
• 1 x Brugermanual (dette dokument)

2.2. Tilslutning af dit tastatur

The Akko 3084B Plus offers three connection modes:

Wired (USB) Mode

1. Connect the provided Type-C cable to the keyboard's USB-C port.
2. Tilslut den anden ende af kablet til en ledig USB-port på din computer.
3. Trykke Fn + U on the keyboard to switch to USB mode.
4. Tastaturet vil automatisk blive genkendt af dit operativsystem.

Note: The Akko Cloud Driver software can only be used when the keyboard is in wired (USB) mode.

2.4 GHz trådløs tilstand

1. Locate the 2.4GHz wireless receiver dongle.
2. Sæt modtageren i en ledig USB-port på din computer.
3. Trykke Fn + Y on the keyboard to switch to 2.4GHz wireless mode.
4. Tastaturet burde oprette forbindelse automatisk.

Bluetooth 5.0-tilstand

The keyboard can connect to up to 3 Bluetooth devices.

1. Trykke Fn + E, Fn + R, eller Fn + T to select one of the three Bluetooth channels.
2. On your device (tablet, computer, mobile phone), enable Bluetooth and search for new devices.
3. Select "Akko 3084B Plus" from the list of available devices to pair.
4. Repeat for up to three different devices, assigning each to a unique Fn+E/R/T channel.

2.3. Adjusting Keyboard Height

The keyboard features a rubberized tilted stand with three levels of adjustable heights to customize your typing experience:

• Level 1: 5° tilt
• Level 2: 7.5° tilt
• Level 3: 11° tilt

3. Betjeningsvejledning

3.1. Switching Between Connection Modes

To switch between the different connection modes, use the following key combinations:

• Wired (USB) Mode: Trykke Fn + U
• 2.4 GHz trådløs tilstand: Trykke Fn + Y
• Bluetooth-tilstand: Trykke Fn + E (Device 1), Fn + R (Device 2), or Fn + T (Device 3)

3.2. RGB-baggrundsbelysning

The Akko 3084B Plus features built-in RGB LEDs that are customizable. You can cycle through over 20 lighting effects, including pulsing lights, using the Akko Cloud Driver software. Refer to the software section for more details on customization.

3.3. Programmerbare taster og makroer

All keys, except for dedicated functionality keys, can be rebound or configured into macros using the Akko Cloud Driver software. Macros must be programmed in wired (USB) mode, but once saved, they can be activated in any connection mode without the software running.

4. Vedligeholdelse

4.1. Generel rengøring

• Use the provided plastic dust cover when the keyboard is not in use to prevent dust accumulation.
• For general cleaning, gently wipe the keycaps and keyboard surface with a soft, lint-free cloth.
• For deeper cleaning, you may remove keycaps using the included keycap puller.

4.2. Hot-swap-kontakter

The keyboard features 5-pin hot-swappable sockets, allowing you to easily change switches without soldering. This is useful for customizing your typing feel or replacing a malfunctioning switch.

1. Using the included switch puller, carefully grip the switch from its top and bottom clips.
2. Gently pull the switch straight up to remove it from the socket.
3. Align the pins of the new switch with the holes in the PCB.
4. Press the new switch firmly into place until it clicks. Ensure the pins are not bent.

4.3. Keycap Materials

The keyboard is equipped with durable Double-shot PBT plastic keycaps, known for their resistance to wear and shine compared to ABS materials. This ensures the keycaps maintain their aesthetic and tactile quality over extended use.

5. Fejlfinding

• Keyboard not responding in wireless mode: Ensure the keyboard is charged. Check that the correct wireless mode (2.4GHz or Bluetooth) is selected using Fn + Y or Fn + E/R/T. For 2.4GHz, ensure the receiver is securely plugged in. For Bluetooth, verify pairing on your device.
• Akko Cloud Driver not detecting keyboard: The software requires the keyboard to be in wired (USB) mode. Connect the keyboard via the Type-C cable and press Fn + U.
• Specific key not working: If a single key is malfunctioning, it may be a faulty switch. Utilize the hot-swappable feature to replace the switch with a spare or a known working one.
• Problemer med RGB-belysning: Ensure the keyboard is connected to a computer with the Akko Cloud Driver installed to customize or reset lighting effects.
• Batteri oplades ikke: Connect the keyboard to a powered USB port using the Type-C cable. Ensure the cable is not damaged.

6. Specifikationer

6.1. Akko CS Jelly Switch Specifications

7. Brugertips

• Softwarekonfiguration: Always ensure your keyboard is connected via the Type-C cable and in USB mode (Fn + U) when using the Akko Cloud Driver for key remapping, macro programming, or RGB customization.
• Bluetooth Device Switching: Remember to use Fn + E/R/T to quickly switch between your three paired Bluetooth devices.
• Støvbeskyttelse: Regularly use the provided plastic dust cover to keep your keyboard clean and prolong its lifespan.

8. Garanti og support

For warranty information, technical support, and the latest software downloads (Akko Cloud Driver), please visit the official Akko webwebstedet eller kontakt din forhandler. Gem din købsbevis til garantikrav.