Retroflag Classic USB Controller-M Brugsanvisning

1. Introduktion

The Retroflag Classic USB Controller-M is a wired gamepad designed to provide a classic gaming experience across multiple platforms. This controller supports Raspberry Pi, Nintendo Switch, PC (Windows), and Nintendo Switch OLED systems. It features XINPUT, DINPUT modes, and a Turbo function for enhanced gameplay. This manual provides essential information for setup, operation, and maintenance.

Figur 1: Forside view of the Retroflag Classic USB Controller-M

2. Pakkens indhold

Din pakke skal indeholde følgende varer:

• 1 or 2 Retroflag Classic USB Controller-M gamepads (depending on your purchase choice)

3. Specifikationer

Figure 2: Controller packaging highlighting system compatibility

4. Opsætning og installation

The Retroflag Classic USB Controller-M is designed for plug-and-play functionality, making setup straightforward.

4.1 Tilslutning af controlleren

1. Locate an available USB port on your desired device (Raspberry Pi, PC, or Nintendo Switch dock).
2. Plug the USB connector of the Retroflag Classic USB Controller-M into the USB port.
3. The system should automatically detect and configure the controller.

4.2 Initial Mode Selection (First Use Only)

For optimal compatibility, the controller can be set to different input modes. This selection is typically only required during the first connection to a new system or if you wish to change the default mode.

• SWITCH Mode: Simply plug and play. This is the default mode for Nintendo Switch.
• XINPUT Mode (Default for PC): Hold down the 'X' button on the controller while plugging it into your PC. This mode is generally recommended for modern PC games.
• DINPUT-tilstand: Hold down the 'Y' button on the controller while plugging it into your PC. This mode is often used for older PC games or specific emulators.

Once a mode is selected by holding the respective button during plug-in, the controller will typically remember this setting for future connections to that specific device.

5. Betjeningsvejledning

The controller features a standard layout for classic gaming. Familiarize yourself with the button functions:

Figur 3: Side view of the controller with USB cable

5.1 Grundlæggende kontroller

• D-Pad: Til retningsbestemt bevægelse.
• Action Buttons (A, B, X, Y, L, R): Perform in-game actions as configured by the game or system.
• SELECT / START Buttons: Typically used for menu navigation, pausing, or specific in-game functions.

5.2 Turbofunktion

The Turbo function allows for rapid, automatic pressing of a selected button, which can be useful in certain games.

• To Activate/Deactivate Turbo: Simultaneously hold down the 'L' button, the 'SELECT' button, and the desired action button (A, B, X, or Y). Repeat this combination to toggle the Turbo function ON or OFF for that specific button.
• Note: The Turbo function is only available for the A, B, X, and Y buttons.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your Retroflag Classic USB Controller-M, follow these simple maintenance guidelines:

• Rensning: Brug en blød, tør klud til at tørre controlleren af. Ved genstridigt snavs, tør letampRengør kluden med vand eller et mildt, ikke-slibende rengøringsmiddel. Undgå for meget fugt.
• Opbevaring: Opbevar controlleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Kabelpleje: Avoid sharply bending or pulling the USB cable. Always grasp the plug when disconnecting, not the cable itself.
• Undgå dråber: Beskyt controlleren mod fald og stød, som kan beskadige de interne komponenter.

7. Fejlfinding

If you encounter issues with your controller, try the following troubleshooting steps:

• Controller reagerer ikke:
  • Sørg for, at USB-kablet er korrekt tilsluttet både controlleren og enheden.
  • Prøv at tilslutte controlleren til en anden USB-port på din enhed.
  • Restart your device (PC, Raspberry Pi, or Nintendo Switch).
  • Verify that the correct input mode (XINPUT/DINPUT for PC) was selected during the initial plug-in. Unplug and replug while holding the appropriate button if necessary.
• Knapper fungerer ikke korrekt:
  • Check in-game settings or system controller calibration tools to ensure buttons are mapped correctly.
  • Test the controller on a different game or platform to determine if the issue is specific to one application.
• Turbo Function Issues:
  • Ensure you are pressing the 'L' + 'SELECT' + (A, B, X, or Y) combination correctly to toggle the function.
  • Remember that Turbo only applies to A, B, X, and Y buttons.

8. Brugertips

• Tjek kompatibilitet: Always ensure your operating system or gaming platform is listed as compatible before use. This controller supports Windows (7/8/10), Raspberry Pi (e.g., Retropie), and Nintendo Switch/Switch OLED.
• Valg af tilstand: For PC users, experiment with XINPUT and DINPUT modes if you experience compatibility issues with certain games or emulators. XINPUT is generally for newer titles, while DINPUT might be needed for older ones.

9. Garanti og support

For information regarding warranty coverage, technical support, or replacement parts, please refer to the seller's website or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.