Brugsanvisning til batterier fra Getac PS535, PS535E, PS535F

Indledning

This manual provides essential information for the safe and effective use of your new Getac PS535, PS535E, PS535F compatible battery. This battery is designed for use with FC-25A and SHC-25 Data Collectors, offering reliable power for your surveying and data collection tasks. Please read this manual thoroughly before installation and operation.

Specifikationer

Figur 1: Forside view of the battery with key specifications.

Sikkerhedsoplysninger

Din sikkerhed er altafgørende. Overhold følgende forholdsregler, når du håndterer og bruger batteriet:

• Use Specified Charger Only: Always use a charger specifically designed for this battery type or the data collector it powers. Using an incompatible charger may cause damage or fire.
• Avoid Incorrect Replacement: Incorrectly replacing the battery or disposing of it in fire may cause an explosion.
• Do Not Short-Circuit: Prevent metal objects from coming into contact with the battery terminals, as this can cause a short-circuit, leading to heat generation, fire, or explosion.
• Temperaturgrænser: Do not charge the battery at or above 40°C (104°F) ambient temperature. High temperatures can degrade battery performance and pose safety risks.
• Undgå fysisk skade: Do not crash, puncture, or disassemble the battery. Physical damage can lead to internal short-circuits and hazardous situations.
• Korrekt bortskaffelse: This Lithium-ion battery must be recycled or disposed of properly according to local regulations. Do not dispose of it with household waste.
• Udskiftning: Replace only with the same or equivalent type specified by the manufacturer of the data collector.

Figure 2: Battery label with safety warnings and certifications.

Opsætning og installation

To install the battery into your data collector:

1. Ensure your data collector is powered off and disconnected from any external power sources.
2. Locate the battery compartment on your Getac PS535, PS535E, PS535F, FC-25A, or SHC-25 Data Collector. Refer to your data collector's specific user manual for the exact location and opening procedure.
3. Carefully remove the old battery, if present.
4. Align the new battery with the battery compartment, ensuring the connector pins match the receptacle.
5. Gently insert the battery until it is securely seated. Do not force the battery.
6. Close the battery compartment cover according to your data collector's instructions.

Det anbefales at oplade batteriet helt inden første brug.

Betjeningsvejledning

Once the battery is installed and fully charged, you can power on your data collector as usual. The battery provides 3.7V of power with a 2400mAh capacity, designed for extended operation of compatible devices.

• Opladning: Always use the original or a manufacturer-approved charger for your data collector. Connect the charger to the data collector and a power source. The charging indicator on your device will typically show the charging status.
• Batteriniveau: Monitor the battery level through your data collector's interface to avoid unexpected power loss during critical operations.

Opretholdelse

Proper maintenance extends the life and ensures the safety of your battery:

• Opbevaring: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prevent deep discharge.
• Rensning: Keep the battery terminals clean and free from dirt or corrosion. Use a dry, clean cloth to wipe them if necessary.
• Temperatur: Avoid exposing the battery to temperatures above 40°C (104°F) or below 0°C (32°F) for prolonged periods, especially during charging.
• Bortskaffelse: When the battery reaches the end of its life, dispose of it responsibly at a designated recycling facility. Do not incinerate or discard with general waste.

Fejlfinding

Hvis du støder på problemer med dit batteri, bør du overveje følgende:

• Enheden tænder ikke:
  • Ensure the battery is correctly installed and fully seated in the compartment.
  • Verify the battery is charged. Connect the data collector to its charger and check if the charging indicator activates.
  • If the battery is old, it might have reached the end of its lifespan and require replacement.
• Batteri oplades ikke:
  • Check if the charger is properly connected to both the data collector and the power outlet.
  • Ensure you are using the correct charger for your device.
  • Inspect the charging port on the data collector and the battery terminals for any obstructions or damage.
• Forkortet batterilevetid:
  • Over time, all rechargeable batteries experience a decrease in capacity. If the battery life has significantly shortened, it may be time for a replacement.
  • Ensure the battery is not being used or charged in extreme temperatures.

Hvis disse trin ikke løser problemet, bedes du kontakte kundesupport.

Brugertips

Der var ingen specifikke brugertips tilgængelige fra revieweller spørgsmål og svar til dette produkt.

Garanti og support

For any questions, technical assistance, or warranty inquiries regarding this battery, please contact the seller or manufacturer directly. Customer service is available 24 hours online to assist you.