1. Introduktion
The Pro'sKit SS-989 is a versatile 2-in-1 SMD Rework Station designed for professional and hobbyist electronics repair. It integrates a powerful 700W hot air gun and a precise 60W soldering iron, offering efficient and reliable performance for various soldering and desoldering tasks. This station complies with CE and ESD standards and is RoHS compliant, ensuring safety and environmental responsibility.
Nøglefunktioner omfatter:
- Dual power switch for independent or simultaneous operation of hot air gun and soldering iron.
- Adjustable temperature and airflow for precise control.
- Microprocessor-controlled temperature for accuracy.
- Automatic cool-off process to extend heating element lifespan.
- Alumina ceramic heating element for fast warm-up in the soldering iron.
- Metal heating core for the hot air gun.
- Low noise diaphragm pump with 24L/min (max) air capacity.
- Flame-retardant and scald-resistant ESD handle.
- Digital LED temperature display.
2. Opsætningsvejledning
- Udpakning og inspektion: Carefully remove all components from the packaging. Inspect the unit, hot air gun, soldering iron, and accessories for any signs of damage. Retain the packaging for future storage or transport.
- Placering: Place the solder station on a stable, heat-resistant, and non-flammable surface. Ensure adequate ventilation around the unit.
- Forbind komponenter:
- Connect the hot air gun to its designated port on the front panel.
- Connect the soldering iron to its designated port on the front panel.
- Place the hot air gun in its holder and the soldering iron in its stand.
- Strømtilslutning: Ensure the power switches (ON/OFF) on the front panel are in the 'OFF' position. Connect the provided AC 220V~240V 50Hz power cord to the rear of the unit and then to a grounded electrical outlet. The unit features a three-pin plug design and a rear fuse for safety.
- Indledende kontrol: Before powering on, double-check all connections.
3. Betjeningsvejledning
3.1 Tænd/sluk
- To power on the unit, flip the main 'POWER' switch to 'ON'. The LED displays will illuminate.
- The hot air gun and soldering iron have individual power switches. Flip the respective switch to 'ON' to activate each tool.
- To power off, flip the individual tool switches to 'OFF', then the main 'POWER' switch to 'OFF'. The hot air gun will enter an automatic cool-off process before completely shutting down.
3.2 Betjening af varmluftpistol
- Ensure the hot air gun is securely placed in its holder.
- Turn on the hot air gun using its individual power switch.
- Juster temperatur: Use the 'HEAT CONTROL' knob to set the desired hot air temperature. The LED display for 'SMD REWORK' will show the current temperature. The range is from room temperature up to 480°C (896°F).
- Juster luftstrøm: Use the 'AIR CONTROL' knob to adjust the airflow. The unit features an 8-level wind power adjustment. The maximum air capacity is 24 liters/minute.
- Brug af dyser: Select an appropriate nozzle (2.2mm, 6.6mm, 8.5mm are included) for your application and attach it to the hot air gun. Ensure it is securely fastened.
- Automatisk køling: When the hot air gun is placed back into its holder, it will automatically initiate a cooling process, blowing air until the nozzle temperature drops to a safe level. This prolongs the life of the heating element.
3.3 Loddejerns drift
- Ensure the soldering iron is placed in its stand.
- Turn on the soldering iron using its individual power switch.
- Juster temperatur: Use the 'TEMPERATURE CONTROL' knob to set the desired soldering iron temperature. The LED display for 'SOLDERING' will show the current temperature. The range is 200°C to 480°C (392°F to 896°F).
- Allow the soldering iron to reach the set temperature. The alumina ceramic heating element ensures fast warm-up.
- Always tin the soldering iron tip before and after use to prevent oxidation and ensure efficient heat transfer.
3.4 Temperaturkalibrering
The unit features a temperature calibration function. Refer to the specific instructions for calibration if precise temperature adjustments are required beyond the standard controls.
4. Vedligeholdelse
Regular maintenance ensures optimal performance and extends the lifespan of your solder station.
- Rensning: Regularly clean the main unit, hot air gun, and soldering iron handles with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged and cool before cleaning.
- Pleje af loddespids: Keep soldering tips clean and tinned. Use a damp sponge or brass wool to clean the tip during use. Replace tips when they become excessively worn or corroded.
- Udskiftning af dyse: Hot air nozzles are interchangeable. Ensure the hot air gun is cool before attempting to change nozzles. Use appropriate tools if necessary to remove and attach nozzles securely.
- Luftfilter (hvis relevant): Periodically check and clean any air filters to ensure proper airflow and prevent dust buildup. (Specific filter location not detailed, refer to visual inspection).
- Udskiftning af sikring: The unit is equipped with a rear fuse for safety. If the unit fails to power on, check and replace the fuse if blown. Always replace with a fuse of the same type and rating.
- Opbevaring: When not in use, store the solder station in a clean, dry environment, away from excessive dust and moisture.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke | Power cord not connected; Main power switch off; Blown fuse | Check power cord connection; Ensure main power switch is ON; Check and replace fuse if necessary. |
| Varmluftpistolen varmer ikke op | Hot air gun switch off; Temperature set too low; Heating element failure | Turn on hot air gun switch; Increase 'HEAT CONTROL' setting; Contact support if heating element is suspected. |
| No airflow from hot air gun | Air control set to minimum; Air pump issue; Blocked nozzle/air path | Increase 'AIR CONTROL' setting; Check for obstructions in nozzle or air path; Contact support if air pump is suspected. |
| Loddejernet varmer ikke op | Soldering iron switch off; Temperature set too low; Heating element failure | Turn on soldering iron switch; Increase 'TEMPERATURE CONTROL' setting; Contact support if heating element is suspected. |
| Unstable temperature readings | Sensorproblem; Kalibrering nødvendig | Ensure connections are secure; Perform temperature calibration if available; Contact support. |
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | SS-989 / SS-989H |
| Oprindelse | Fastlandet Kina |
| Certificering | NONE (Complies with CE and ESD standards) |
| Samlet strømforbrug | 700W |
| Loddejerns strøm | 60W |
| Soldering Iron Temperature Range | 200 ~ 480 ° C (392 ~ 896 ° F) |
| Varmluftstemperaturområde | Room temperature ~ 480 °C (896 °F) |
| Loddejern varmeelement | Alumina Ceramic |
| Varmluft varmeelement | Metal varme kerne |
| Pump/Motor Type | Membranpumpe |
| Luftkapacitet | 24 L/min (max) |
| Udstyr Støj | 45dB |
| Temperatur display | LED |
| Strømindgang | AC 220V~240V 50Hz |
| Dimensioner (L x B x H) | 255 x 190 x 140 mm |
| Vægt | 4.2 kg |
| Inkluderet tilbehør | Hot Air Gun (AC220~240V), Soldering Iron (AC 24V/60W) 9SS-900N-SI, Nozzles (2.2mm, 6.6mm, 8.5mm), Soldering Iron Stand/Desoldering Cotton |
| Håndtag | Flame-retardant and scald resistant ESD handle |
7. Garanti og support
For garantioplysninger, teknisk support eller serviceforespørgsler bedes du kontakte din forhandler eller producenten direkte. Gem din købskvittering som købsbevis.
8. Brugertips
- Soldering Iron Replacement: The soldering iron is a replaceable component. If your existing soldering iron breaks or wears out, a replacement can be sourced from the manufacturer or authorized dealers.
- ESD-sikkerhed: Always observe ESD (Electrostatic Discharge) safety precautions when working with sensitive electronic components. The station is ESD safe, but proper grounding practices should still be followed.
- Ventilation: Ensure adequate ventilation in your workspace to dissipate fumes generated during soldering and desoldering.