Indledning
This manual provides essential instructions for the safe and effective use of your YU XIANG F120 RC Helicopter T6-001 Remote Controller. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage.
Sikkerhedsoplysninger
⚠️ Ansvarsfraskrivelse:
Kun til rekreativ brug. Ulovlig ændring af droner/fly er forbudt. Vær også opmærksom på de relevante love og regler for brug af droner/fly i dit land/område for at sikre lovlig brug.
- Always operate the remote controller and associated RC helicopter in open, clear areas, away from people, animals, and obstacles.
- Ensure the remote controller's batteries are properly installed and charged before each use.
- Do not expose the remote controller to moisture, extreme temperatures, or direct sunlight for extended periods.
- Keep the remote controller out of reach of children when not in use.
Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- 1 x T6-001 Remote Controller (Left Throttle configuration)
Produkt overview
The T6-001 is a 2.4 GHz S-FHSS digital proportional remote control system designed for the YU XIANG F120 RC Helicopter. It features a left-throttle configuration, providing precise control over your helicopter's flight. The controller includes various functions for flight adjustments and mode selection.
Nøglefunktioner:
- 2.4 GHz S-FHSS Technology for reliable communication.
- Left Throttle configuration.
- High/Low speed switch (H/L).
- Function and Mode buttons for advanced control.
- Integrated display screen for telemetry or settings (details not specified, refer to helicopter manual for full functionality).
Opsætning
This remote controller is a spare part for the YU XIANG F120 RC Helicopter. Initial setup typically involves pairing or binding the controller with your helicopter.
Binding Procedure (General Steps):
- Ensure both the remote controller and the helicopter are powered off.
- Refer to your YU XIANG F120 RC Helicopter's specific user manual for detailed binding instructions. The exact sequence of button presses and power-on steps can vary.
- Typically, you will power on the helicopter in a binding mode (often by holding a button or connecting the battery in a specific way).
- Then, power on the T6-001 remote controller, often while holding a binding button or switch.
- The indicator lights on both the helicopter and the remote controller should change to indicate a successful bind.
- Once bound, power cycle both devices and test the controls in a safe environment before flight.
Note: Always consult the helicopter's manual for precise binding instructions as this controller is a spare part for a specific model.
Betjeningsvejledning
The T6-001 remote controller provides intuitive control over your YU XIANG F120 RC Helicopter. Familiarize yourself with the controls before attempting flight.
Control Layout (Left Throttle Mode 2):
| Kontrollere | Fungere |
|---|---|
| Left Stick (Vertical) | Throttle (Power) / Collective Pitch |
| Left Stick (Horizontal) | Yaw (Tail Rotor Control) |
| Right Stick (Vertical) | Pitch (Forward/Backward) |
| Right Stick (Horizontal) | Roll (Left/Right) |
| H/L Switch | High/Low Speed Mode Selection |
| FUNCTION -knap | Activates specific functions (refer to helicopter manual) |
| MODE knap | Changes flight modes or settings (refer to helicopter manual) |
| Trimhåndtag | Fine-tune helicopter stability (adjust as needed for stable hover) |
Before flying, ensure all trim settings are neutral. Perform a pre-flight check to confirm all controls respond correctly and smoothly.
Opretholdelse
Proper maintenance will extend the life of your remote controller.
- Rensning: Wipe the controller with a soft, dry cloth. Do not use solvents or harsh chemicals.
- Batteripleje: Remove batteries if the controller will not be used for an extended period to prevent leakage. Use only recommended battery types.
- Opbevaring: Opbevar controlleren et køligt, tørt sted, væk fra direkte sollys og ekstreme temperaturer.
- Inspektion: Periodically check for any loose parts, damaged switches, or frayed wires.
Fejlfinding
If you encounter issues with your T6-001 remote controller, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Controlleren tænder ikke. | Døde eller forkert installerede batterier. | Udskift batterierne med nye, og sørg for at polariteten vender korrekt. |
| Helikopteren reagerer ikke på controlleren. | Ikke bundet, uden for rækkevidde eller interferens. | Re-bind the controller to the helicopter. Ensure you are within operating range. Move away from sources of interference (Wi-Fi, other 2.4GHz devices). |
| Erratic helicopter behavior. | Interference, damaged controller, or helicopter issue. | Check for interference. If the problem persists, consult the helicopter's manual or contact support. |
| Display screen is blank or unreadable. | Low battery or internal fault. | Replace batteries. If still blank, contact support. |
Specifikationer
| Attribut | Detalje |
|---|---|
| Modelnummer | T6-001 |
| Mærkenavn | walkera |
| Kompatibel dronemodel | YU XIANG F120 F03 |
| Kompatibelt dronemærke | EACHINE (also compatible with YU XIANG F120) |
| Størrelse | As shown in product images |
| Pakke | No (typically bulk packaging for spare parts) |
| Oprindelse | Fastlandet Kina |
Brugertips
- Kompatibilitetskontrol: Før købasing or using, always confirm that the T6-001 remote controller is compatible with your specific YU XIANG F120 RC Helicopter model.
- Batterikvalitet: Using high-quality batteries can improve signal stability and extend operating time.
- Praksis: If new to RC helicopters, practice in a simulator or a very open area to get accustomed to the left-throttle controls before attempting complex maneuvers.
Garanti og support
For warranty information, technical support, or replacement parts, please contact the original seller or manufacturer. Keep your purchase receipt as proof of purchase.
