Ecowitt GW2001 Wittboy Vejrstation Brugermanual

1. Introduktion

The Ecowitt GW2001 Wittboy Weather Station is an all-in-one integrated weather monitoring system designed for both weather enthusiasts and professionals. It includes the GW2000 IoT Wi-Fi Gateway and the WS90 7-in-1 Outdoor Solar Powered Weather Sensor. This system provides accurate local weather data, including outdoor temperature, humidity, wind direction and speed, light and UV levels, rainfall, indoor temperature, indoor humidity, and barometric pressure. Data can be viewed instantly on the Ecowitt app and ecowitt.net website, and shared with various internet weather services.

Key features of the Ecowitt Wittboy Weather Station.

2. Hvad er inkluderet

The Ecowitt GW2001 Wittboy Weather Station package contains the following components:

• 1 × Weather Sensor (WS90)
• 1 × Wi-Fi Hub (GW2000)
• 1 × Ethernet-kabel
• 1 × DC to USB power cable for Hub
• 1 × Bird Spike
• 1 × Quick Start Manual

Note: The 915MHz version includes a US power adapter, the 433MHz version includes an AU power adapter, and the 868MHz version does not include an adapter.

Main components of the Ecowitt GW2001 Wittboy Weather Station.

3. Opsætning og installation

3.1 WS90 Outdoor Sensor Installation

The WS90 sensor is designed for outdoor use and should be mounted in a location that provides accurate readings, away from obstructions. It can be attached to a pole (not included) with a diameter of 1.0 inch. Ensure the mounting location allows for optimal solar panel exposure and clear wind path.

All-in-one integrated weather sensors diagram (exploded view).

Mounting the WS90 outdoor sensor on a pole (pole not included).

Internal components and mounting details of the WS90 sensor.

3.2 Power Supply for WS90

The WS90 sensor is primarily solar-powered via a built-in 6.5V/4mA solar panel. For night use or prolonged cloudy days, it uses 2 x AA 1.5V backup batteries (not included). Rechargeable Li-batteries are recommended.

An optional external power cord (sold separately) can be used for both heating and power supply. If using the external power cord, ensure the supply voltage is between 5V and 20V. Exceeding 20V can damage the WS90. A 12V power supply is recommended for efficient heating and longer cable runs.

Dual power supply system and auto-heater function of the WS90 outdoor sensor.

Optional external power cord for WS90 (sold separately).

3.3 GW2000 IoT Wi-Fi Gateway Setup

The GW2000 IoT Wi-Fi Gateway connects your WS90 sensor data to your home network and the internet. Power the GW2000 using the provided DC to USB power cable.

The GW2000 IoT Wi-Fi Gateway.

3.4 Bird Spike Installation

To prevent birds from interfering with the outdoor sensor, install the included bird spike. Follow these steps:

1. Insert the stainless steel strap into the silicon strip. Ensure the protruding part of the stainless steel and silicon strip are on the same side.
2. Bend the assembly into a circle. Ensure the pin holes are all facing up and leave some space before finishing the circle for the next operation.
3. Set the circular bird spike on the rain gauge.
4. Tighten with needle-nose pliers. Hold the needle-nose pliers and turn to tighten the stainless steel strap to cut off the excess length.
5. Insert the stainless steel needle into the designated holes.

Bird Spike Installation Instructions.

4. Betjeningsvejledning

4.1 Wi-Fi-konfiguration

The GW2000 Gateway requires Wi-Fi configuration to connect to your network and upload data. There are three methods:

Method A: Via Embedded Web Page (Phone Connection)

1. Connect your phone to the Wi-Fi hub once it is powered on.
2. Enter '192.168.4.1' in your phone's browser to open the embedded web side.
3. Log in (no password required) and then enter your SSID and Wi-Fi password to complete the configuration.

Method B: Via Embedded Web Page (Ethernet Connection)

1. Plug an Ethernet cable into the GW2000 to connect it to your Wi-Fi router.
2. Find the assigned IP address via DHCP (check your router's connected devices list).
3. Enter the IP address in your phone's browser to open the embedded web side.
4. Log in (no password required) and then enter your SSID and Wi-Fi password to complete the configuration.

Method C: Via Ecowitt APP (Recommended)

1. Download the Ecowitt APP from your phone's app store (available on App Store and Google Play).
2. Follow the in-app instructions to guide you through the setting process. This method is highly recommended for its ease of use.

Three methods for Wi-Fi configuration.

4.2 Viewing and Sharing Data

Once configured, your weather station data can be accessed and shared:

• Ecowitt-appen: View live data and historical trends directly on your smartphone or tablet.
• ecowitt.net Webwebsted: Access your weather data from any web browser.
• Internetvejrtjenester: Publish your data to platforms like Weather Underground, WOW, Weather Cloud, and Ecowitt Weather. Custom sites using Wunderground or Ecowitt protocols are also supported.

Remote monitoring and platform compatibility.

Long transmission range and data flow.

Supported internet weather services.

4.3 Alert Emails

You can set up custom alert conditions to receive email notifications for specific weather events. This feature helps you stay informed about changes in your local environment.

5. Vedligeholdelse

5.1 Generel vedligeholdelse

The WS90 is designed for near-zero maintenance due to its lack of moving parts. However, periodic checks are recommended to ensure optimal performance.

5.2 Snowpack Management

During snowy conditions, snow accumulation can affect sensor accuracy:

• Øverste sne (①): Snow on the very top cannot be heated. It must be manually swept away to prevent interference with solar power supply and rainfall measurement.
• Midterste sektionssne (②): Snow in the middle section can affect wind speed measurement. The built-in heating plate will automatically activate below 5°C (40°F) and turn off above 10°C (50°F) to melt snow and ice, ensuring the anemometer functions correctly. For this to work, the optional heating cable (③) must be connected.

Snowpack on the WS90 sensor and areas affected by heating.

5.3 Temperature and Humidity Sensor Kit Replacement

The Temperature and Humidity Sensor Kit is replaceable if needed. Refer to the quick start manual for detailed replacement instructions.

Replaceable Temperature & Humidity Sensor Kit.

5.4 Haptic Rainfall Sensor Calibration

The WS90's haptic rain sensor can be calibrated for improved accuracy. This process requires a reference rain gauge (e.g., Ecowitt WH40) that can record rainfall values and rain rates.

1. Obtain a reliable reference rain gauge (e.g., WH40) to record rainfall and rain rate.
2. The WS90 has five rain gain parameters (Piezo Rain1 to Rain5). You can adjust these parameters based on the difference between the WS90 readings and your reference.
3. For initial calibration, you might set Rain2, Rain3, and Rain5 to the same value (e.g., 0.8 if your WS90 reads 7.5mm when the reference reads 6mm, so 6/7.5 = 0.8).
4. For precise calibration, when different rain rates are recorded, divide the WS90 rain by the current gain setting (e.g., 0.8) to get a normalized value, then calculate the new gain by (reference value / normalized WS90 value) and update the corresponding rain gain setting.

Daily rain deviation comparison between WH40 and WS90.

Rainfall values recorded for WH40 and WS90.

Setting rain gain parameters for calibration.

6. Fejlfinding

• No Data/Incorrect Readings:
  • Check WS90 battery levels and solar panel for obstructions.
  • Ensure GW2000 is powered on and connected to Wi-Fi (check indicator lights).
  • Verify WS90 is within the 100m (328 ft) transmission range of the GW2000.
  • For rain data, ensure the haptic sensor is clear of debris and consider calibration if deviations are consistent.
• Problemer med Wi-Fi-forbindelse:
  • Re-attempt Wi-Fi configuration using Method C (Ecowitt App) for ease of use.
  • Ensure correct SSID and password are entered.
  • Check router settings for any restrictions or MAC address filtering.
• Snow/Ice Affecting Readings:
  • Manually clear snow from the topmost part of the WS90.
  • Ensure the optional heating cable is connected and functioning if experiencing snow/ice accumulation in the middle section.

7. Specifikationer

WS90 Outdoor Sensor

WS90 Outdoor Sensor.

GW2000 IoT Wi-Fi Gateway

GW2000 IoT Wi-Fi Gateway.

8. Brugertips

• For optimal rain data accuracy, consider pairing the WS90 with a WH40 rain sensor, especially if highly precise measurements are critical.
• The Ecowitt App is generally the easiest method for initial Wi-Fi configuration.
• Regularly check the solar panel for cleanliness to ensure continuous power supply to the WS90.
• If you need to extend the power cable for the WS90, a 12V power supply is recommended for better performance, especially if using the heating function.
• While the product description doesn't explicitly mention Alexa integration, Ecowitt products often support third-party integrations. Check the Ecowitt website or community forums for potential smart home system compatibility.

9. Ofte stillede spørgsmål (FAQ)

Q: What does the automatic heating function do?

A: The WS90 features a built-in thermostat heating plate that automatically activates below 5°C (40°F) and deactivates above 10°C (50°F). This melts snow and ice, ensuring the anemometer continues to function accurately, which is crucial as traditional weather stations can be affected by snow and ice impacting wind measurement.

Q: How many ways are the products powered?

A: The WS90 sensor has three power options: solar-powered autonomy (via built-in solar panel), backup battery (2 x AA 1.5V, not included), and an optional external heating cable power supply (sold separately).

Q: In what ways can this item be utilized?

A: This weather station can be utilized for monitoring various environmental parameters such as temperature, humidity, wind speed and direction, light, UV levels, and rainfall. It's suitable for personal use, farming, gardening, or any application requiring local weather data. The data can be accessed via the Ecowitt app or website and shared with other weather services.

10. Garanti og support

For warranty information, technical support, or further assistance, please refer to the official Ecowitt website or contact their customer service directly. The Quick Start Manual included in your package also contains important contact details and troubleshooting steps.