MiCODUS ML910G

MiCODUS ML910G 4G GPS Tracker Brugermanual

Model: ML910G | Brand: MiCODUS

1. Introduktion

The MiCODUS ML910G is a robust 4G GPS tracker designed for reliable real-time tracking of vehicles and assets. Featuring a powerful 10000mAh battery and super strong magnets for easy installation, it offers multiple working modes to optimize battery life and a comprehensive suite of anti-theft alarms. This manual provides essential information for setting up, operating, and maintaining your ML910G tracker.

2. Sikkerhedsoplysninger

  • Forsøg ikke at adskille eller modificere enheden.
  • Hold enheden væk fra ekstreme temperaturer, direkte sollys og åben ild.
  • Ensure the device is securely mounted to prevent it from falling during vehicle movement.
  • Brug kun det medfølgende opladningskabel og en kompatibel strømadapter.
  • Bortskaf enheden og dens batteri i henhold til lokale regler.

3. Pakkens indhold

Tjek venligst pakken for følgende varer:

  • MiCODUS ML910G GPS Tracker
  • Brugervejledning V1.0
  • USB opladningskabel
MiCODUS ML910G package contents including the tracker, user manual, and USB cable.
Figur 1: Pakkens indhold

4. Produktet er slutview

Familiarize yourself with the components of your MiCODUS ML910G tracker:

Diagram showing the components of the MiCODUS ML910G tracker: GNSS, Cellular, Power indicators, Light Sensor, Powerful Magnet, USB Port, ON/OFF Switch, and SIM Card slot.
Figure 2: Product Structure
  1. GNSS-indikator
  2. Mobilindikator
  3. Strømindikator
  4. Lyssensor
  5. Powerful Magnet (2 pcs)
  6. USB-port
  7. ON/OFF-knap
  8. SIM-kortslot

5. Opsætningsvejledning

5.1 Installation af SIM -kort

The ML910G uses a normal size SIM card. Ensure the SIM card has data service enabled for 4G LTE and 2G GSM networks.

  1. Locate the SIM Card slot (8) on the device.
  2. Carefully insert the SIM card into the slot until it clicks into place.
  3. Ensure the SIM card is correctly oriented as per the diagram or markings on the device.

5.2 Opladning af enheden

The device has a built-in rechargeable 3.7V 10000mAh Li-ion battery.

  1. Connect the USB charging cable to the USB Port (6) on the device.
  2. Tilslut den anden ende af USB-kablet til en kompatibel USB-strømadapter (medfølger ikke).
  3. The Power Indicator (3) will show charging status. A full charge takes approximately 12 hours.

5.3 Tænd/sluk

  • To power on: Locate the ON/OFF Switch (7) and slide it to the 'ON' position.
  • To power off: Slide the ON/OFF Switch (7) to the 'OFF' position.

5.4 Platform Setup (Web & App)

The MiCODUS ML910G offers a lifetime free web and app tracking platform.

  • Web Platform: Access the tracking platform via www.micodus.net. Follow the on-screen instructions to register your device.
  • Mobil app: Download the "Micodus" app from the App Store (iOS) or Google Play Store (Android). Install the app and register your device.
Screenshot of the MiCODUS web tracking platform login page and mobile app icons for App Store and Google Play.
Figur 3: Web and App Tracking Platform

6. Betjeningsvejledning

6.1 Multiple Working Modes

The ML910G offers three working modes to balance tracking frequency and battery life:

Diagram illustrating the three working modes: Tracking Mode (10-15 days battery), Power Saving Mode (approx. 30 days battery), and Hibernation Mode (approx. 60 days battery).
Figure 4: Multiple Working Modes
  • Tracking Mode (10-15 days battery life): GPS is ON and connected to the network. If static for more than 5 minutes, it enters sleep mode. Upload intervals can be set for moving (10-3600s) and static (180-65535s) states.
  • Power Saving Mode (approx. 30 days battery life): GPS is OFF, but the device remains connected to the network. Data is uploaded at specific intervals, and can be acquired at any time. Set a start upload time (e.g., 8:00) and upload interval (1-72h).
  • Hibernation Mode (approx. 60 days battery life): GPS is OFF and the device is disconnected from the network. Data is uploaded at specific intervals. Only a tamper alarm can wake up the device. Set a start upload time (e.g., 8:00) and upload interval (1-72h).

You can switch between these modes via the tracking platform or mobile app to suit your needs.

6.2 Sporing i realtid

The ML910G allows you to track your target in real-time on Google Maps via your mobile phone, tablet, or computer. The minimum upload interval for real-time tracking is 10 seconds.

Illustration of real-time tracking on Google Maps, showing a car being tracked on a road with the tracking interface visible on a mobile app, tablet, and PC.
Figure 5: Real-time Tracking Interface

6.3 Historical Route Playback

The MiCODUS platform records historical route data for up to 180 days. This feature can help you analyze driving habits, optimize fuel consumption, and understand where the vehicle has been.

Screenshot of the historical route playback feature on the MiCODUS app, showing a traced route on a map with location pins.
Figure 6: Historical Route Playback

6.4 Anti-theft Alarms

The ML910G provides multiple anti-theft alarms for enhanced security:

Collage of images depicting various anti-theft alarms: Vibration Alarm (car collision), Movement Alarm (vehicle being towed), Geo-fence (vehicle entering/exiting a defined area), Teardown Alarm (device being picked off or dropped).
Figure 7: Multiple Anti-theft Alarms
  • Vibrationsalarm: Triggers when the device detects significant vibration, such as a collision.
  • Bevægelsesalarm: Alerts you if the device moves outside a predefined area or starts moving unexpectedly.
  • Geo-hegn: Allows you to set virtual boundaries. You will receive an alert if the tracker enters or exits these areas.
  • Teardown Alarm: Activated if the device is removed or dropped, often detected by the light sensor or internal sensors.
  • Alarm for overhastighed: Sends an alarm message to the tracking platform and SOS contact numbers if the unit exceeds a preset speed limit.
Image showing a car speedometer exceeding 185 km/h, illustrating the overspeed alarm feature.
Figure 8: Overspeed Alarm

6.5 Stemmemonitor

The ML910G supports voice monitoring, allowing you to listen to the surroundings of the device. Refer to the app or web platform for instructions on activating and using this feature.

7. Vedligeholdelse

  • Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
  • Batteripleje: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if using it in Tracking Mode.
  • Vandtæt/støvtæt: The device is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets. While it is water-resistant, avoid submerging it in water or exposing it to high-pressure water.
Image illustrating the IP65 dustproof and waterproof features of the MiCODUS ML910G, showing it resistant to dust and water splashes.
Figure 9: IP65 Dust and Waterproof Rating

8. Fejlfinding

ProblemMulig årsagLøsning
Enheden tænder ikkeLavt batteri; Sluk for strømmenCharge the device fully; Ensure ON/OFF switch is in 'ON' position.
Intet GPS-signalDevice in an area with poor satellite reception (e.g., indoors, underground); GPS module off in power-saving modes.Move to an open-sky area; Switch to Tracking Mode for continuous GPS.
Ingen netværksforbindelseSIM card not inserted correctly; SIM card has no data; Device in an area with no 4G/2G coverage.Reinsert SIM card; Check SIM card data plan; Move to an area with network coverage.
Unøjagtig placeringWeak GPS signal; Relying on LBS in dense areas.Ensure device has clear view of sky for optimal GNSS accuracy; LBS accuracy varies by base station density.
Alarms not triggeringAlarm settings not configured; Device in Hibernation Mode.Configure alarm settings in the app/web platform; Ensure device is in an appropriate working mode.

9. Specifikationer

Detailed product specification table for the MiCODUS ML910G GPS Tracker.
Figur 10: Produktspecifikationer
Enhedsoplysninger
ModelML910G
Vægt306 g
Dimensioner115*65*31 mm
Batteri3.7V 10000mAh Li-Polymer batteri
Arbejdsspecifikationer
BatterilevetidReal-time Tracking Mode: 10-15 days; Power Saving Mode: around 30 days; Hibernate Mode: around 60 days
Arbejdstemperatur-20°C - 60°C
Arbejdsfugtighed5%-95%RH
OpladningstidOmkring 12 timer
Mobilspecifikationer
SIM-kortNormal størrelse
MobilantenneIndbygget
Working Frequency (4G LTE CAT1)B1/B2/B3/B4/B5/B7/B8/B28/B66
Working Frequency (2G GSM/GPRS)850/900/1800/1900MHz
GNSS-specifikationer
GNSSGPS+GLONASS+BDS
Varm/varm/kold start<3'ere, <35'ere, <45'ere @ Open Sky
GNSS antenneIndbygget keramik GNSS-antenne
PositioneringstypeGNSS+LBS+AGPS
GNSS-nøjagtighed<5M under Open Sky
LBS nøjagtighed100-2000m (Depend on density of base stations)
Hovedtræk
FunktionerSuper Powerful Magnet, 4G+2G Network, Realtime Tracking, Vibration Alarm, Shift Alarm, Teardown Alarm, Voice Monitor, IP65 Dust And Waterproof, Three Working Modes, Long Standby
SporingsplatformLifetime Free (www.micodus.net)
Sporings-APPMICODUS (iOS & Android)

10. Brugertips

  • For optimal battery life, utilize the Power Saving or Hibernation modes when continuous real-time tracking is not critical.
  • The strong magnets allow for easy, non-professional installation on metallic surfaces. Ensure the surface is clean and flat for maximum adhesion.
  • Regularly check the device's location and battery status via the app or web platform to ensure continuous protection.
  • The device's special features include voice monitor, overspeed alarm, vibration alarm, waterproof design, and long standby capabilities.

11. Garanti og support

The MiCODUS ML910G comes with a 1-year warranty from the date of purchase. For any technical support or warranty claims, please contact MiCODUS Official Store directly through their platform or webwebsted.

Kontaktoplysninger:

Relaterede dokumenter - ML910G

Preview MiCODUS ML910G/ML920G GPS-tracker brugermanual og opsætningsvejledning
Omfattende brugermanual til MiCODUS ML910G og ML920G GPS-trackere, der dækker opsætning, specifikationer, funktioner, SMS-kommandoer og fejlfinding. Lær, hvordan du aktiverer, konfigurerer og bruger din MiCODUS-tracker.
Preview MiCODUS MV77G 4G GPS Tracker Brugermanual: Opsætning, funktioner og kommandoer
Detaljeret brugermanual til MiCODUS MV77G 4G LTE GPS-trackeren. Dækker hovedfunktioner, tekniske specifikationer, installation, opsætning af SIM-kort, APN-konfiguration, indikatorstatus, funktioner, SMS-kommandoer, fejlfinding og download af app.
Preview MiCODUS MV750G Vandtæt Intelligent 4G Køretøjs GNSS Tracker - Funktioner og Specifikationer
Oplev MiCODUS MV750G, en højtydende, IP67 vandtæt 4G GPS-tracker til køretøjer. Har realtidssporing, fjernbetjening, geofencing og detaljerede specifikationer til flåde- og personlig brug.
Preview MiCODUS MV750G GPS Tracker Brugermanual: Opsætning, funktioner og kommandoer
Omfattende brugermanual til MiCODUS MV750G GPS Tracker. Lær om dens funktioner, specifikationer, installation, ledningsføring, SMS-kommandoer og fejlfinding.
Preview MiCODUS ML500G brugermanual V2.0: Opsætning, funktioner og kommandoer
Omfattende brugermanual til MiCODUS ML500G GPS-trackeren. Dækker enhedens opsætning, hovedfunktioner, tekniske specifikationer, aktivering, pakkeindhold, funktionsforklaringer, installationsanbefalinger, fejlfinding og en komplet liste over SMS-kommandoer.
Preview MiCODUS MV55G GPS Tracker Brugervejledning
Brugervejledning til MiCODUS MV55G GPS-trackeren, der beskriver funktioner, specifikationer, aktivering, funktioner, installation, fejlfinding og SMS-kommandoer til opsætning og betjening.