1. Produktet er slutview
The LoraTap SC400W-EU-V5A is a Wi-Fi enabled push-button smart curtain switch designed to control roller shutters, curtains, and blinds. It integrates seamlessly with Tuya Smart Life, Amazon Alexa, and Google Home, offering convenient app remote control, voice control, and advanced scheduling features.
Figure 1: LoraTap Smart Curtain Switch Overview
2. Pakkens indhold
Kontroller venligst, at alle varer er til stede i din pakke:
- 1 x LoraTap Smart Curtain Switch
- 1 x Brugervejledning (dette dokument)
- 1 x terminal
- 2 x Screws Kit
- 1 x blå tråd
Figur 2: Medfølgende tilbehør
3. Important Notes Before Installation
- Dette er en Kun Wi-Fi curtain switch. It is not compatible with RF (Radio Frequency) remotes. Do not attempt to pair it with RF remotes.
- Ensure your motor is a 4-wire AC motor (Blue Wire, Brown Wire, Black Wire, Green/Yellow Wire). This switch cannot work with DC motors.
- Input bindtage: 100-250VAC, 50/60Hz. Output Voltage (Motor Voltage): 100-250VAC, 50/60Hz.
Figure 3: Wiring Compatibility Notice
4. Installationsvejledning
The LoraTap Smart Curtain Switch is designed for EU standard junction boxes (80mm*80mm). Follow these steps carefully:
Step 1: Prepare for Wiring
- Sluk for hovedstrømforsyningen before starting any electrical work.
- Carefully open the glass panel of the switch. Use a screwdriver to gently pry it open on a flat surface to avoid scratching or breaking the glass.
Trin 2: Tilslutning af kontakten
Refer to the wiring diagrams below based on your motor type. Ensure all connections are secure.
Figure 4: Wiring Diagram for LoraTap Smart Curtain Switch
A. Installation with Standard Blinds (4-Wire AC Motor):
- Input L: Connect the Live Wire (Red/Brown/Black Wire) from AC power.
- Input N: Connect the Neutral Wire (Blue Wire) from AC power.
- Output L1: Connect the Brown Wire from the Motor.
- Output L2: Connect the Black Wire from the Motor.
- Output N: Connect the Neutral Wire (Blue Wire) from the Motor.
- Note: The switch does not have a terminal for an earth wire. The earth wire of the motor does not need to be connected to the switch.
- Brugertip: If you have two blue neutral wires (Input Neutral and Output Neutral), connect both into the 'N' position on the switch.
B. Installation with Blinds with Built-in Driver (5-Wire Motor):
For motors with a built-in driver (typically 5 wires: L, L1, L2, N, Earth Wire), follow the same connections as for standard blinds. The switch will manage the L1 and L2 outputs to control the motor's direction.
Step 3: Connect the Terminal Block
Ensure all wires are properly inserted into their respective terminals and tightened securely. Refer to the diagram for correct terminal block connection.
Step 4: Mount the Back Plate
- Fix the back plate securely onto the wall junction box using the provided screws.
- Vigtig: Keep the power off before installing the glass panel. Installing with power on may cause the product to malfunction.
Step 5: Attach the Glass Panel
Once the back plate is secured and wiring is complete, carefully press the glass panel back onto the back plate until it clicks into place.
5. App Pairing and Operation
After physical installation, you can pair your switch with the Tuya Smart Life app for smart control.
5.1. App-parring
- Tænd: Restore power to the switch.
- Nulstil enhed: Press and hold the 'Pause' button on the switch for 5 seconds until the indicator light blinks rapidly. This puts the device into pairing mode.
- Åbn app: Åbn Tuya Smart Life-appen på din smartphone.
- Tilføj enhed: Tap 'Add Device' or the '+' icon. Select the appropriate device type (e.g., 'Curtain Switch' or 'Switch (Wi-Fi)').
- Wi-Fi-netværk: Select your 2.4GHz Wi-Fi network and enter the password. (Note: 5GHz Wi-Fi is not supported).
- Bekræft blinkning: Bekræft, at indikatorlampen på kontakten blinker hurtigt i appen.
- Tilføjelse af enhed: The app will scan for and add the device. This may take a few moments.
- Succes: Once added successfully, you can rename the device and start controlling it.
Video 1: Installation and App Pairing Demonstration
5.2. Kontrolmetoder
A. Push Button Control:
Use the physical buttons on the switch to manually open, close, or pause your curtains/blinds.
Figure 5: Manual Push Button Control
B. App Remote Control:
Control your curtains/blinds from anywhere using the Smart Life or Tuya app on your smartphone. The app allows you to open, close, pause, and set the running time (10-120 seconds) for precise control.
Figur 6: App-fjernbetjening
Figure 7: Setting Running Time in App
C. Voice Control:
Integrate with Amazon Alexa or Google Assistant for hands-free voice commands. Simply say "Alexa, Open the curtain" or "Hey Google, Close the blinds" to control your devices.
Figur 8: Stemmestyring med smarte assistenter
5.3. Avancerede funktioner
A. Timer and Schedules:
Set specific times for your curtains/blinds to open or close automatically. This can be configured within the Smart Life/Tuya app.
Figure 9: Timer and Schedule Settings
B. Sunrise/Sunset Automation:
Utilize the app's location-based features to automatically open or close your curtains/blinds at sunrise or sunset, enhancing comfort and energy efficiency.
Figure 10: Sunrise/Sunset Automation
C. Device Sharing and Group Function:
Create groups within the app to manage multiple blinds simultaneously. You can also share control of the device with other family members, allowing everyone to operate the smart curtains.
Figure 11: Group Control and Device Sharing
6. Vedligeholdelse
The LoraTap Smart Curtain Switch requires minimal maintenance. To ensure optimal performance and longevity:
- Rensning: Gently wipe the glass panel with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the surface.
- Firmwareopdateringer: Periodically check the Smart Life/Tuya app for available firmware updates to ensure your device has the latest features and security enhancements.
- Miljøforhold: Ensure the switch is installed in a dry environment, away from direct moisture or extreme temperatures.
7. Fejlfinding
If you encounter issues with your LoraTap Smart Curtain Switch, refer to the following common problems and solutions:
| Problem | Mulig årsag/løsning |
|---|---|
| Switch not responding / No power |
|
| Motor not moving or moving incorrectly |
|
| Unable to pair with app |
|
| Stemmestyring virker ikke |
|
| Switch malfunctions after glass panel installation |
|
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærkenavn | Lora Tap |
| Modelnummer | SC400W-EU-V5A |
| Input bindtage | 100-250V AC, 50/60Hz |
| Max belastning | 600W |
| Standby forbrug | Under 0.5W |
| Dimensioner | 80 mm x 80 mm x 30 mm |
| Trådløs protokol | 2.4GHz Wi-Fi (IEEE 802.11 b/g/n) |
| 5GHz Wi-Fi Support | Ingen |
| App navn | Tuya, smart liv |
| App Type | Free App, Support Android and iOS |
| Stemmestyringskompatibilitet | Amazon Alexa, Google Assistant |
| Hub påkrævet | Ingen |
| Compatible Motor Type | Classic 4 Wires AC motor, Tubular Motor with 4 wires |
| Plast materiale | Brandsikkert ABS |
| Certificering | CE, RoHS, RED, EMC |
| Oprindelse | Fastlandet Kina |
9. Brugertips
- Praktisk strømstyring: The LoraTap Smart Curtain Switch offers convenient power control and complies with safety certifications, ensuring reliable operation.
- Home Automation Integration: This device is ideal for home automation setups, allowing integration with other smart devices for a cohesive smart home experience.
- Neutral Wire Management: When wiring, if you have both input and output neutral wires (blue wires), connect both securely into the 'N' terminal on the switch.
- Regelmæssige app-tjek: Periodically check the Smart Life/Tuya app for new features or updates that can enhance your experience.
10. Garanti og support
LoraTap is a leading brand in smart home products, committed to quality and customer satisfaction. For any questions or support regarding your LoraTap Smart Curtain Switch, please contact our customer service.
En detaljeret brugermanual i PDF-format kan også downloades: LoraTap Smart Curtain Switch User Manual (PDF).
