Stanley SBD710 Cordless Drill User Manual

1. Introduktion

Thank you for choosing the Stanley SBD710 Cordless Drill. This powerful and versatile tool is designed for a wide range of drilling and fastening applications. Featuring a brushless motor for enhanced efficiency and durability, and operating on the Stanley V20 Lithium-Ion PowerShare platform, this drill offers reliable performance for both professional and DIY tasks. Please read this manual carefully before use to ensure safe and optimal operation.

Figure 1: Stanley SBD710 Cordless Drill

2. Generelle sikkerhedsoplysninger

Følg altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade.

2.1 Arbejdsområdesikkerhed

• Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
• Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.

2.2 Elektrisk sikkerhed

• Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde.
• Udsæt ikke elværktøj for regn eller våde forhold. Vand, der trænger ind i et elværktøj, øger risikoen for elektrisk stød.

2.3 Personlig sikkerhed

• Brug altid øjenbeskyttelse. Brug sikkerhedsbriller eller beskyttelsesbriller.
• Klæd dig ordentligt på. Bær ikke løstsiddende tøj eller smykker. Hold dit hår og tøj væk fra bevægelige dele.
• Vær opmærksom, hold øje med, hvad du laver, og brug din sunde fornuft, når du betjener et elværktøj.
• Undgå utilsigtet start. Sørg for, at kontakten er i slukket position, før du tilslutter batteriet, løfter eller bærer værktøjet.

2.4 Brug og pleje af værktøj

• Tving ikke elværktøjet. Brug det korrekte elværktøj til din applikation.
• Frakobl batteripakken fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Opbevar inaktivt elværktøj utilgængeligt for børn, og lad ikke personer, der ikke er bekendt med elværktøjet eller disse instruktioner, betjene elværktøjet.

3. Produktet er slutview

The Stanley SBD710 Cordless Drill is engineered for performance and user comfort. Key features include:

• Børsteløs motor: Giver øget effektivitet, længere driftstid og forlænget værktøjslevetid sammenlignet med børstemotorer.
• 2-hastighedsjustering: Allows selection between high speed for drilling and high torque for driving applications.
• 15+1 Momentindstillinger: Offers precise control for various materials and screw sizes, preventing overtightening.
• 13mm Quick Change Chuck: Enables fast and easy bit changes without the need for a key.
• Integreret LED lys: Illuminates the work area for improved visibility in dimly lit spaces.
• Stepless Speed Adjustable Trigger: Provides variable speed control based on trigger pressure for precise starting and stopping.
• Ergonomic Rubber Handle: Designed for comfortable grip and reduced user fatigue during prolonged use.
• PowerShare 20V Battery Platform: Compatible with all Stanley V20 Lithium-Ion batteries, allowing for interchangeable use across a range of tools.

Figure 2: Key Features of the SBD710 Drill

Figure 3: Stanley V20 PowerShare Platform Compatibility

4. Specifikationer

Figure 4: Product Label with Specifications

5. Opsætning

5.1 Installation og fjernelse af batteri

1. To install the battery: Align the battery pack with the tool's battery port. Slide the battery pack into the tool until it clicks securely into place.
2. To remove the battery: Press the battery release button (usually located on the side of the battery pack) and slide the battery pack out of the tool.

Ensure the battery is fully charged before first use. The battery pack may feature an indicator to show the charge level.

Figure 5: Battery with Power Display

Installation og fjernelse af 5.2-bit

1. To install a bit: Rotate the chuck counter-clockwise until the jaws are open wide enough to insert the bit. Insert the desired drill bit or screwdriver bit into the chuck.
2. Drej borepatronen med uret for at stramme kæberne sikkert omkring boret. Sørg for, at boret er centreret og har et fast greb.
3. To remove a bit: Rotate the chuck counter-clockwise to loosen the jaws and pull the bit out.

Figure 6: Quick Change Chuck and LED Light

6. Betjeningsvejledning

6.1 Tænd/sluk og hastighedskontrol

• For at tænde for værktøjet skal du trykke på afbryderen.
• Slip afbryderen for at slukke for værktøjet.
• The tool features a stepless speed adjustable trigger. The speed of the tool is controlled by the amount of pressure applied to the trigger switch.

6.2 hastighedsvalg

The drill has a 2-speed gearbox, allowing you to select the appropriate speed for your task:

• Gear 1 (Low Speed, 0-600rpm): Provides higher torque, ideal for driving screws and drilling larger holes in tough materials.
• Gear 2 (High Speed, 0-1900rpm): Provides higher speed, ideal for drilling smaller holes and faster drilling in softer materials.

To change the speed, use the speed selector switch located on top of the drill. Ensure the tool is stopped before changing gears.

6.3 Momentjustering (koblingsindstillinger)

The torque adjustment collar allows you to set the amount of torque before the clutch disengages. This prevents overtightening screws and stripping screw heads or damaging the workpiece.

• Rotate the torque adjustment collar to select one of the 15 torque settings for driving screws.
• The higher the number, the greater the torque. Start with a lower setting and increase as needed.
• For drilling, set the collar to the drill symbol (usually the highest setting) to bypass the clutch and provide maximum power.

Figure 7: Torque Adjustment Collar

6.4 Boring og inddrivning

The Stanley SBD710 is suitable for both drilling and driving applications:

• Boring: Select the appropriate drill bit for the material and hole size. Set the torque collar to the drill symbol. Use high speed for smaller holes and softer materials, low speed for larger holes and harder materials. Apply steady, even pressure.
• Drivskruer: Select the appropriate screwdriver bit. Set the torque collar to a suitable setting for the screw size and material. Use low speed for better control.

Figure 8: Drilling and Driving Applications

6.5 Work Area Illumination

The integrated LED light automatically activates when the trigger is pressed, providing illumination to your work surface.

6.6 Performance Demonstration Video

Video: Demonstration of drilling efficiency and endurance tests with the Stanley SBD710.

7. Vedligeholdelse

7.1 Rengøring

• Hold værktøjets ventilationsåbninger rene for at forhindre overophedning.
• Tør værktøjet af med en ren,amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Rengør spændepatronens kæber regelmæssigt for at sikre korrekt greb om borene.

7.2 Opbevaring

• Opbevar værktøjet og batteriet et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer.
• Opbevares utilgængeligt for børn og uautoriserede personer.

7.3 Pleje af batterier

• Charge batteries regularly, even if not in use, to maintain optimal performance and lifespan.
• Opbevar ikke batterier i afladet tilstand.
• Undgå at udsætte batterier for vand eller ekstrem varme.

8. Fejlfinding

8.1 Almindelige problemer og løsninger

• Værktøjet starter ikke:
  • Sørg for, at batteripakken er fuldt opladet og korrekt isat.
  • Kontroller, om frem/bak-vælgeren er i neutral (låst) position.
• Strømtab under drift:
  • The battery may be low. Recharge the battery pack.
  • The tool might be overloaded. Reduce pressure or use a lower speed/higher torque setting.
• Bit glider i borepatron:
  • Sørg for, at borepatronen er spændt godt fast omkring boret.
  • Kontroller, om boreskaftet er rent og fri for snavs.
  • Use bits with appropriate shank size for the 13mm chuck.
• Overophedning af værktøj:
  • Lad værktøjet køle af.
  • Ensure ventilation slots are clear of dust and debris.
  • Undgå kontinuerlig, tung brug uden pauser.

9. Brugertips

• Batterikompatibilitet: The Stanley SBD710 is part of the Stanley V20 Lithium-Ion PowerShare platform. This means it is designed to be compatible with genuine Stanley V20 batteries and chargers. If you own other Stanley V20 cordless tools, their batteries should work with this drill.
• Optimal Torque Setting: For driving screws, always start with a lower torque setting and gradually increase it until the screw is driven flush without stripping the head or damaging the material. This prolongs the life of your bits and prevents workpiece damage.
• Brug LED-lyset: Don't forget to utilize the built-in LED light, especially when working in shadowed areas or inside cabinets, to improve visibility and accuracy.
• Børsteløs Advantage: The brushless motor not only provides more power and runtime but also requires less maintenance compared to brushed motors, as there are no carbon brushes to replace.

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official Stanley website or contact your local authorized Stanley service center. Keep your purchase receipt as proof of purchase for any warranty claims.