1. Produktet er slutview
The JJC TPR-U1 Pan Bar Controller is specifically designed to work with Sony cameras and camcorders equipped with a Multi/LANC terminal, adding a pan-handle based camera control to your setup. It is compatible with most tripods featuring a handle diameter between 0.4" and 1.4". This controller enhances your shooting experience by providing convenient and flexible camera control, allowing you to focus on your shot rather than manipulating camera buttons directly.
2. Nøglefunktioner
- Works with Sony cameras/camcorders with Multi/LANC terminals.
- Fits most tripods with handle diameter within 0.4"-1.4".
- Adds pan-handle based camera control, enabling control via cable rather than on-camera buttons.
- Detachable multi-function controller to prevent camera shake during still image shooting.
- Constructed from premium aluminum alloy for durability and reliability.
- Rotates and positions at any 10-degree interval, preventing slippage.
- Includes functions for power on/off, video/still image recording, zooming, slow zooming, locking (bulb shooting), and displaying grid lines.
- Comes with connecting cables for Multi Terminal and LANC Terminal, a storage pouch, and a lanyard.
3. Hvad er inkluderet
- Pan Bar Controller x1
- Connecting Cable for Multi Terminal x1
- Connecting Cable for LANC Terminal x1
- Storage Pouch x1
- Snor x1
- Brugsanvisning x1
4. Kompatibilitet
4.1. Sony Cameras/Camcorders with Multi Terminal
The controller is compatible with the following Sony camera and camcorder models:
Sony Cameras:
- FX30, ZV-1
- A9, A7, A7II, A7III, A7IV, A7R, A7RII, A7RIII, A7RIV, A7R V, A7S, A7SII, A7SIII
- A6600, A6500, A6400, A6300, A6100, A6000
- RX100 Mark VII, VI, VA, IV, III, II
- RX10 IV, III
Sony Camcorders:
- PXW-X70, PXW-Z90V, HXR-NX80
- FDR Series: AX30, AX33, AX40, AX43, X53, AX55, AX100, AX100E, AX700, AXP33, AXP35, AXP55
- HDR Series: CX240, CX405, CX440, CX455, CX675, CX900
Note: When used with mirrorless cameras, the zooming function of the remote commander only works with power zoom lenses, such as the Sony E PZ 16-50mm f/3.5-5.6 OSS Lens.
4.2. Sony Camcorders and Cinema Cameras with LANC Terminal or 2.5mm Remote Terminal
The controller is compatible with the following Sony camcorder models:
- HXR-NX100, HXR-NX200, HXR-NX5R, HXR-NX3, HXR-NX70, HXR-NX30, HXR-MC2500
- PXW-FS5, PXW-FS7, PXW-X160, PXW-X180, PXW-Z100, PXW-Z150, PXW-Z190, PXW-Z280
- FDR-AX700
5. Opsætningsvejledning
5.1. Attaching the Pan Bar Controller to a Tripod
- Identify a suitable pan bar or handle on your tripod. The controller's clamp is designed to fit handles with a diameter between 0.4" and 1.4".
- Loosen the knob on the pan bar clamp.
- Placer clamp around the tripod handle and tighten the knob securely. Ensure the controller is firmly attached and does not wobble. The silicone padding inside the clamp helps protect your tripod handle from scratches.
- Adjust the angle of the controller as needed. The pan bar allows for multi-angle installation and can be rotated and positioned at any 10-degree interval to achieve your preferred angle, preventing slippage or accidental loosening.
5.2. Connecting to Camera/Camcorder
- Select the appropriate connecting cable for your camera/camcorder (Multi Terminal or LANC Terminal).
- Connect one end of the cable to the corresponding port on your camera/camcorder.
- Connect the other end of the cable to the designated port on the JJC TPR-U1 Pan Bar Controller.
5.3. Visual Setup Guide
Watch this video for a step-by-step visual guide on setting up and using the JJC TPR-U1 Pan Bar Remote Controller, including attaching it to a tripod and connecting it to your camera/camcorder.
6. Betjeningsvejledning
The JJC TPR-U1 controller offers various functions for precise camera control. Refer to the diagram below for button layout and functions.
6.1. Tænd/sluk
- Tryk på POWER/REC button to turn the controller on or off. The indicator light will show the power status.
6.2. Videooptagelse
- Tryk på REC button (red dot) to start video recording. Press it again to stop recording.
6.3. Still Image Shooting
- Tryk på Still Image Shooting button (camera icon) to capture a still image.
6.4. Zoomning
- Brug T (Telephoto) og W (Wide) rocker switch to zoom in and out.
6.5. Slow Zooming
- Skift til SLOW ZOOM switch to 'ON' for a smoother, slower zoom effect. Set to 'OFF' for normal zoom speed.
6.6. Locking Function (Bulb Shooting)
- The controller features a locking function for bulb shooting or continuous shooting. Refer to your camera's manual for specific settings related to bulb mode.
6.7. Grid Line Function
- Tryk på Gitterlinje button (grid icon) to display or hide grid lines on your camera's monitor, aiding in composition.
6.8. Detachable Controller
The multi-function controller can be detached from the pan bar. This is particularly useful when shooting still images to prevent any camera shake that might occur from handling the pan bar directly.
7. Pleje og vedligeholdelse
- Keep the controller dry. Do not expose it to rain or moisture.
- Rengør controlleren med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Undgå kraftige stød eller at enheden tabes.
- Store the controller in the provided storage pouch when not in use to protect it from dust and scratches.
- Use the included lanyard to prevent accidental drops when using the controller alone.
8. Fejlfinding
- Controlleren svarer ikke: Ensure the cable is securely connected to both the camera/camcorder and the controller. Check if the camera/camcorder is powered on and in the correct mode.
- Zoom function not working: For mirrorless cameras, ensure you are using a power zoom lens. Verify that the camera's settings allow for remote zoom control.
- Optagelsen starter ikke: Confirm the camera/camcorder is in video recording mode and ready to record. Check cable connections.
- Intermitterende forbindelse: Ensure cables are not damaged and ports are clean. Avoid excessive bending or pulling of cables.
9. Tekniske specifikationer
| Attribut | Værdi |
|---|---|
| Mærkenavn | JJC |
| Model | JJC TPR-U1 |
| Modelnummer | Pan Bar Remote for LANC Camera |
| Materiale | Aluminiumslegering + ABS |
| Farve | Sort |
| Nettovægt | 311.1 g |
| Pakke | Ja |
| Oprindelse | Fastlandet Kina |
9.1. Produktmål
- Controller Length: 10.4" (263.4mm)
- Pan Bar Length: 5.5" (140.4mm)
- Pan Bar Width: 2.4" (61.3mm)
9.2. Package Dimensions and Weight
- Længde: 15 cm
- Bredde: 10 cm
- Højde: 5 cm
- Vægt: 0.4 kg
10. Garanti og support
JJC is committed to providing high-quality products and excellent customer service. Your JJC TPR-U1 Pan Bar Remote Controller comes with the following assurances:
- Kvalitetssikring: This is an official, authentic, and 100% brand new JJC product.
- Gratis returnering: Få gratis returnering inden for 90 dage efter købet.
- Hurtig levering: De fleste varer sendes inden for 48 timer.
- Leveringsgaranti:
- Få en kuponkode på 1.00 USD, hvis leveringen er forsinket.
- Refusion hvis pakken går tabt.
- Refusion hvis varerne er beskadigede ved ankomst.
- Fuld refusion ved manglende levering inden for 30 dage.
- Hjælp til indkøb: All customer inquiries via email will be answered within 24 hours.
- Sikkerhed og privatliv: Dine personlige oplysninger er beskyttet og deles ikke med tredjeparter uden samtykke.
For further assistance or to claim warranty services, please contact your retailer or visit the official JJC webwebsted.
