Indledning
The ThermoPro TP65C is a digital wireless indoor/outdoor thermometer and hygrometer designed to provide accurate measurements of temperature and humidity. Equipped with professional-grade sensors, it helps you monitor environmental conditions in your home and outdoor areas, allowing for necessary adjustments to maintain comfort and health. Its user-friendly design includes a large backlit touchscreen for easy readability.
ThermoPro TP65C main display unit and remote sensor.
Pakkens indhold
- 1 x basestationsenhed (modtager)
- 1 x Single Outdoor Remote Sensor (Transmitter)
- 1 x brugermanual
Note: Batterier er ikke inkluderet og skal købes separat.
Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | TP65C |
| Mærke | ThermoPro |
| Teori | Termometer Hygrometer |
| Display Type | DIGITAL, 4'' LCD with Backlit |
| Skærmstørrelse | 2.0 - 3.9 tommer |
| Strømtype | AAA-batteri (medfølger ikke) |
| Indendørs temperaturområde | -4 ° F ~ 158 ° F (-20 ° C ~ 70 ° C) |
| Udendørs temperaturområde | -4 ° F ~ 158 ° F (-20 ° C ~ 70 ° C) |
| Temperatur nøjagtighed | ±2.0 °F (±1.1 °C) |
| Fugtighedsområde | 10 % ~ 99 % |
| Fugtighedsopløsning | 1% |
| Fugtighedsnøjagtighed | ±2% fra 30% til 80%; ±3 % under 30 % og over 80 % |
| Transmission Range | Op til 100 meter (330 fod) i åbent område |
| Transmissionsfrekvens | 868 MHz |
| Foranstaltninger | Fahrenheit og Celsius |
| Certificering | CE |
Approximate dimensions of the display unit (4.3 in / 11 cm height, 3.3 in / 8.5 cm width) and remote sensor (2.9 in / 7.4 cm height, 2.4 in / 6.3 cm width).
Opsætningsvejledning
1. Batteriinstallation
- Open the battery compartment on the back of both the Base Station Unit (Receiver) and the Outdoor Remote Sensor (Transmitter).
- Insert the required AAA batteries (not included) into each unit, ensuring correct polarity (+/-).
- Luk batterirummene forsvarligt.
2. Synkronisering
The units should automatically synchronize upon battery installation. If they do not, or if you are adding additional sensors:
- Press and hold the "CH SYNC" button on the main display unit to initiate synchronization.
- Ensure the remote sensor is within range.
3. Placering
Optimal placement is crucial for accurate readings and reliable wireless transmission.
- Hoveddisplayenhed: Can be placed on a tabletop using its integrated stand, mounted on a wall using the hanging hole, or attached to a metal surface via its magnetic back.
- Udendørs fjernbetjeningssensor: Place the sensor in a location that is protected from direct sunlight and precipitation for the most accurate readings. Ensure it is within the 100-meter (330 feet) transmission range of the main unit. Avoid placing it near large metal objects or electronic devices that could interfere with the wireless signal.
Various placement options for the main display unit.
Example placement of the wireless remote sensor outdoors.
Wireless transmission range up to 100m (330ft) in open areas.
Operation
Læsning af displayet
The large LCD screen displays indoor temperature and humidity, as well as outdoor temperature and humidity from the remote sensor. The "OUT" section shows outdoor readings, and "IN" shows indoor readings. Channel number (CH1, CH2, CH3) indicates which remote sensor's data is being displayed.
Berøringsskærmknapper
The TP65C features touch-sensitive buttons located at the bottom of the screen:
- CH SYNC: Press to cycle through remote sensor channels (CH1, CH2, CH3). Press and hold to initiate synchronization with remote sensors.
- Pæreikon: Activates the backlight for easy reading in low light conditions. The backlight automatically turns off after 15 seconds.
- °F/°C HISTORY: Press to switch between Fahrenheit (°F) and Celsius (°C) temperature display. Press and hold to view the maximum and minimum temperature/humidity records for the last 24 hours or all time.
- MAX/MIN CLEAR: Når viewing MAX/MIN records, press to clear the current records.
Touch screen buttons for channel selection, backlight, temperature unit, and MAX/MIN records.
Monitoring Multiple Sensors
The main display unit can receive data from up to three remote sensors (additional sensors sold separately). Use the "CH SYNC" button to cycle through the channels and view readings from each sensor.
The display unit can track temperature and humidity from up to three remote sensors.
The receiver can synchronize with up to three remote sensors for comprehensive monitoring.
Max/Min Records and Trend Arrows
The device records the maximum and minimum temperature and humidity readings. Trend arrows indicate whether the temperature and humidity are rising, falling, or remaining constant.
