1. Introduktion
Congratulations on your purchase of the TACKLIFE MMD02 Metal Detector. This advanced device is designed for efficient metal detection, featuring dual mode detection (metal and disc), an intuitive LCD screen, and a sound alarm system. Its waterproof search coil and adjustable sensitivity make it suitable for various environments and users, from beginners to experienced treasure hunters. This manual provides essential information for the safe and effective operation of your metal detector.
Figure 1: TACKLIFE MMD02 Metal Detector with included batteries and carrying bag.
2. Produktet er slutview
2.1 Komponenter
Figure 2: Main components of the TACKLIFE MMD02 Metal Detector.
- Vandtæt søgespole
- Justerbar stilk
- Batteriholder
- Kabel
- Fixing Knob and Connector
- Låsemøtrik
- Møtrik
- Arm Support
- Baggrundsbelyst LCD-skærm
2.2 Kontrolpanel
Figur 3: Detaljeret view of the control panel and LCD display.
- LCD-skærm: Shows target identification, depth, battery status, and overload warnings.
- Indikator for lavt batteri: Giver besked når batterierne skal udskiftes.
- Advarsel om overbelastning: Indicates the search coil is too close to a large metal object.
- 3.5 mm hovedtelefonstik: For connecting headphones (not included).
- Backlight ON/OFF Button: Aktiverer eller deaktiverer LCD-baggrundsbelysningen.
- DISC Button (Discrimination Setting): Allows for filtering out unwanted metal types.
- Afbryderen: Tænder/slukker detektoren.
- Kontrolknapper: Used for adjusting sensitivity and other settings.
- Dybdeindikator: Estimerer dybden af det detekterede objekt.
- Target Identification Icons: Visual representation of detected metal types (Iron, Non-ferrous Low-conductivity, Non-ferrous High Conductivity).
3. Opsætning og montering
Follow these steps to assemble your TACKLIFE MMD02 Metal Detector:
Figur 4: Visuel vejledning til samling af metaldetektoren.
- Attach Arm Support: Slide the arm support onto the main handle and secure it with the screw nut.
- Tilslut kontrolboks: Attach the control box to the upper stem. Ensure the cable is routed neatly.
- Assemble Stem Sections: Connect the adjustable stem sections. The detector's length can be adjusted from a minimum of 24 inches (61 cm) to a maximum of 45 inches (114 cm) to suit both children and adults. Secure with the lock nut.
- Fastgør søgespole: Connect the waterproof search coil to the lower stem using the fixing knob and connector. Wrap the cable securely around the stem to prevent tangling.
- Installer batterier: Open the battery holder compartment and insert the required 9V batteries (two 6F22 9V batteries are typically used). Ensure correct polarity.
Figure 5: The adjustable stem allows comfortable use for various heights.
4. Betjeningsvejledning
4.1 Tænd/sluk
Press the Power Switch button (red button on the control panel) to turn the metal detector ON or OFF.
4.2 Justering af følsomhed
The detector features an adjustable sense function. Use the control buttons to increase or decrease sensitivity. Higher sensitivity allows for deeper detection but may also pick up more ground mineralization, leading to false signals. Adjust as needed for your search environment.
4.3 LCD Display and Audio Feedback
The LCD display provides visual cues about detected objects. When a metal object is found, the corresponding icon will illuminate, and a sound alarm will activate. Different tones indicate different types of metal:
- Lav tone: Typically indicates iron targets.
- Mid Tone: Suggests non-ferrous middle conductivity metals like nickels, small jewelry, screws, or tin foil.
- Høj tone: Points to non-ferrous high conductivity metals such as copper, silver, and clad coins.
The Depth Indicator on the LCD provides an estimate of how deep the object is buried.
Video 1: Demonstration of TACKLIFE MMD02 Metal Detector features, including portability, adjustability, and target identification.
4.4 Discrimination Setting (DISC Mode)
The DISC button allows you to filter out unwanted metal types. Pressing the DISC button cycles through different discrimination levels:
Figure 6: Visual representation of the discrimination settings.
- 1 Tryk på: Ferrous icons are eliminated from detection. The detector will ignore most iron targets.
- 2 Presses: Ferrous and low conductor non-ferrous targets are eliminated. This setting will ignore iron, nickels, small jewelry, screws, and tin foil.
- 3 Presses: All metal types are detected. This is the "All Metal" mode, providing the highest sensitivity and depth.
4.5 Using the Waterproof Search Coil
The 7.8-inch search coil is waterproof and can be used in shallow water and humid environments, such as beaches or riverbanks. Ensure the control box is kept dry as it is not waterproof.
Figure 7: The waterproof search coil is ideal for beach detecting.
Figure 8: The 7.8" high sensitivity waterproof search coil operates at 6.6 kHz.
5. Vedligeholdelse
- Rensning: After each use, especially in wet or sandy conditions, wipe down the search coil and stem with a damp klud. Sørg for, at kontrolboksen forbliver tør.
- Batteripleje: Always remove batteries when the detector is not in use for extended periods to prevent leakage and damage. Replace batteries when the low battery indicator appears on the LCD.
- Opbevaring: Store the metal detector in a cool, dry place. The included carrying bag (Dos-MMD02 bag) is designed for convenient storage and transport, allowing the product to be carried without complete disassembly.
Figure 9: The included backpack provides better portability and containment.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No power / Detector does not turn on. | Døde eller forkert installerede batterier. | Kontroller batteripolariteten. Udskift med nye 9V-batterier. |
| Constant beeping or false signals. | High sensitivity setting; ground mineralization; electrical interference. | Reduce sensitivity. Move away from power lines or other electronic devices. Perform ground balance if available (this model has discrimination, not explicit ground balance). |
| Overload Warning displayed. | Search coil too close to a large metal object. | Raise the search coil slightly or move it away from the object. |
| Dårlig detektionsdybde. | Low battery; incorrect sensitivity; highly mineralized ground. | Replace batteries. Increase sensitivity (if not causing false signals). Sweep slower and closer to the ground. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Mærkenavn | TACKLIFE |
| Modelnummer | MMD02 |
| DIY forsyninger | Metalbearbejdning |
| LCD skærm | Yes (with backlight) |
| Strømtype | Battery-Powered (2 x 9V 6F22 batteries) |
| Certificering | CE, RoHS |
| Søgespolestørrelse | 7.8 tommer (20 cm) |
| Driftsfrekvens | 6.6 kHz |
| Justerbar længde | 24-45 tommer (61-114 cm) |
| Vægt | Ca. 2.1 lbs (0.95 kg) |
8. Brugertips
- Langsomt og stabilt: Sweep the search coil slowly and steadily over the ground. Rushing can cause you to miss targets.
- Overlappende fejninger: Ensure each sweep slightly overlaps the previous one to cover the area thoroughly.
- Hovedtelefoner for klarhed: Using headphones can help you hear subtle target signals more clearly, especially in noisy environments.
- Praksis: Familiarize yourself with the detector's tones and display responses by testing it with known metal objects (coins, jewelry) on the surface before heading out for a hunt.
- Adjust for Conditions: Lower sensitivity in highly mineralized ground or areas with a lot of trash to reduce false signals. Use discrimination to filter out common junk metals.
9. Garanti og support
TACKLIFE warrants its products against defective workmanship and faulty materials. This warranty does not cover consumable accessory items or normal wear and tear. For specific warranty details and support, please refer to the official TACKLIFE webwebsted eller kontakt deres kundeservice.
For further assistance or inquiries, please contact TACKLIFE customer support.
