1. Introduktion
The 70mai Hardwire Kit UP03 is designed to provide continuous power to your compatible 70mai Dash Cam, enabling advanced parking surveillance features. By connecting directly to your vehicle's power system, the UP03 kit allows your dash cam to monitor your vehicle for 24 hours, even when the engine is off. This is primarily achieved through time-lapse recording, which efficiently compresses footage to maximize storage and capture critical events.
2. Produktet er slutview
The Hardwire Kit UP03 consists of a Type-C connector cable with an integrated power management module and three bare wires for connection to your vehicle's electrical system. It ensures stable power supply and enables the dash cam's parking monitoring functions.
3. Specifikationer
| Feature | Specifikation |
|---|---|
| Model | Hardwire Kit UP03 |
| Connector Type | Type-C |
| Input bindtage | DC 12-24V |
| Udgang Voltage | 5V |
| Udgangsstrøm | 2.4A |
| Kabellængde | 3 meter |
| Intern grænseflade | USB2.0 |
4. Kompatibilitet
The 70mai Hardwire Kit UP03 is specifically designed for use with the following 70mai Dash Cam models:
- 70mai Dash Cam M500
- 70mai Dash Cam Omni X200
- 70 maj Dash Cam A810
- 70 maj Dash Cam A510
Note: This kit is ONLY compatible with the listed models. Compatibility with other dash cam models, including older 70mai models like the A500 or A500s, is not guaranteed and may require additional adapters or may not function correctly.
5. Opsætning og installation
Proper installation of the hardwire kit is crucial for its functionality and your vehicle's electrical safety. If you are unsure about any steps, it is recommended to seek professional assistance.
5.1 Komponenter
- 70mai Hardwire Kit UP03 (Type-C cable with power module)
- Brugervejledning (dette dokument)
5.2 Ledningsdiagram
The hardwire kit features three distinct wires:
- Rød ledning (VCC+): Connect to a constant power source (BATT+) in your vehicle's fuse box. This fuse should provide power even when the ignition is off.
- Black Wire (GND): Connect to a metal part of the vehicle's chassis for a secure ground connection.
- Gul ledning (ACC): Connect to an accessory power source (ACC) in your vehicle's fuse box. This fuse should only provide power when the vehicle's ignition is on.
5.3 Installationstrin
- Locate the Fuse Box: Refer to your vehicle's owner's manual to find the location of the fuse box (typically under the dashboard, in the engine bay, or in the trunk).
- Identify Fuse Slots: Using a circuit tester, identify a constant power fuse (always on, even with ignition off) for the red VCC+ wire and an accessory power fuse (on only when ignition is on) for the yellow ACC wire. Consult your vehicle's fuse diagram for appropriate circuits.
- Tilslut ledningerne:
- Tilslut Rød ledning (VCC+) to the chosen constant power fuse using a fuse tap (recommended for a clean and safe installation).
- Tilslut Gul ledning (ACC) to the chosen accessory power fuse using a fuse tap.
- Tilslut Black Wire (GND) to a bare metal bolt or screw on the vehicle's chassis to ensure a good ground connection.
- Før kablet: Carefully route the Type-C cable from the fuse box to your dash cam's mounting location, tucking it neatly along the vehicle's trim and headliner to conceal it.
- Tilslut til Dash Cam: Plug the Type-C connector into the corresponding port on your 70mai Dash Cam.
- Test installationen: Start your vehicle to ensure the dash cam powers on. Turn off the ignition and remove the key; the dash cam should switch to parking surveillance mode (refer to your dash cam's manual for specific indicators).
6. Betjeningsvejledning
Once the 70mai Hardwire Kit UP03 is correctly installed and connected to your compatible 70mai Dash Cam, it will automatically enable the 24H Parking Monitoring feature. The dash cam will detect when the vehicle's ignition is turned off and transition into parking mode.
- Time-lapse optagelse: In parking mode, the dash cam will typically record in time-lapse, compressing long periods of footage into shorter clips. This conserves storage space and allows for quick review of parking events.
- Begivenhedsdetektion: The dash cam's G-sensor will detect sudden movements or impacts while parked, triggering emergency recordings.
- Lav-voltage Beskyttelse: The hardwire kit includes built-in low-voltage protection to prevent excessive draining of your vehicle's battery. If the vehicle battery voltage drops below a safe threshold, the hardwire kit will automatically cut off power to the dash cam.
For detailed settings and configuration of parking surveillance features, please refer to the specific user manual of your 70mai Dash Cam model (M500, Omni X200, A810, A510).
7. Vedligeholdelse
The 70mai Hardwire Kit UP03 requires minimal maintenance. Follow these guidelines to ensure optimal performance:
- Regelmæssig inspektion: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.
- Kabelintegritet: Ensure the cable is not pinched, cut, or exposed to excessive heat or moisture, which could compromise its functionality.
- Renhed: Keep the hardwire kit module and connections clean and free from dust or debris.
- Miljøforhold: Avoid exposing the hardwire kit to extreme temperatures or direct water contact.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Dashcam'et tænder ikke. | Forkert ledningsføring, sprunget sikring, løs forbindelse. | Check all three wire connections (VCC+, ACC, GND). Verify fuses in the fuse box are intact. Ensure the Type-C connector is fully inserted into the dash cam. |
| Parking monitoring is not active. | ACC wire incorrectly connected, dash cam settings. | Ensure the yellow ACC wire is connected to a fuse that powers off with the ignition. Check your dash cam's settings to confirm parking monitoring is enabled. |
| Bilens batteri aflades hurtigt. | Incorrect VCC+ connection, dash cam settings. | Ensure the red VCC+ wire is connected to a constant power source, but also verify the dash cam's low-voltage cutoff settings are configured to a safe level (refer to dash cam manual). |
| Dash cam restarts frequently. | Ustabil strømforsyning, løs forbindelse. | Check all wiring connections for looseness. Ensure the power source is stable. |
9. Brugertips
- Use Fuse Taps: For a cleaner and safer installation, it is highly recommended to use fuse taps (add-a-circuit) when connecting the VCC+ and ACC wires to your vehicle's fuse box. This avoids splicing into existing wires and provides an independent fuse for the hardwire kit.
- Consult Vehicle Manual: Always refer to your vehicle's owner's manual and fuse diagram to correctly identify appropriate constant and accessory power fuse slots.
- Professionel installation: If you are not comfortable working with your vehicle's electrical system, consider having the hardwire kit installed by a qualified automotive technician.
10. Garanti og support
For garantioplysninger og teknisk support henvises til den officielle 70mai-side. webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.
11. Sikkerhedsoplysninger
- Always disconnect the vehicle's battery before working on its electrical system to prevent short circuits or electrical shock.
- Ensure all connections are secure and properly insulated to prevent fire hazards.
- Do not attempt to modify the hardwire kit. Unauthorized modifications may void the warranty and pose safety risks.
- Opbevar produktet utilgængeligt for børn.
