JMRRC H16 MIPI Camera User Manual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your JMRRC H16 MIPI Camera. This camera is designed to function as a 1080P digital video and 2.4GHz data transmission telemetry transmitter, specifically compatible with the Skydroid H16 Remote Controller. It features an integrated 8W searchlight and ultra-high luminous efficiency LEDs for enhanced visibility.

2. Specifikationer

3. Opsætningsvejledning

1. Montering: Securely attach the H16 MIPI Camera to your drone or RC vehicle using appropriate hardware. Refer to the diagram for mounting hole spacing (44mm).
2. Strømtilslutning: Connect the camera's power cable to a compatible power source on your vehicle. The power cable length is approximately 45cm. Ensure the voltage supply is within the specified 14-72V range.
3. MIPI Plug Connection: Connect the MIPI plug from the camera to the designated MIPI port on your Skydroid H16 receiver. The MIPI plug cable length is approximately 27cm.
4. Indledende kontrol: After connecting, ensure all cables are firmly seated and there are no loose connections.

4. Betjeningsvejledning

1. Tænd: Power on your RC vehicle and the Skydroid H16 Remote Controller. The camera will typically power on with the vehicle.
2. Video Feed: The 1080P digital video feed will be transmitted via the 2.4GHz data link to your Skydroid H16 Remote Controller's display. Refer to your H16 Remote Controller manual for instructions on viewing the video feed.
3. Searchlight Operation: The integrated 8W searchlight can be controlled through your Skydroid H16 Remote Controller, if supported. Consult your remote controller's manual for specific controls related to auxiliary functions or lighting.
4. Telemetridata: The camera also functions as a telemetry transmitter, sending data back to your H16 Remote Controller. This data can include various flight parameters depending on your setup.

5. Vedligeholdelse

• Rensning: Gently clean the camera lens and housing with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could scratch the lens or damage the finish.
• Kabelinspektion: Regularly inspect the power cable and MIPI plug for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent malfunction.
• Opbevaring: Når kameraet ikke er i brug, skal det opbevares et tørt og køligt sted, væk fra direkte sollys og ekstreme temperaturer.

6. Fejlfinding

• Intet videofeed:
  • Check all cable connections, especially the MIPI plug, to ensure they are secure.
  • Verify that the camera is receiving power (check power cable connection and vehicle battery).
  • Ensure your Skydroid H16 Remote Controller is properly configured to receive video from the camera.
• Searchlight Not Working:
  • Bekræft, at kameraet er tændt.
  • Check the remote controller settings for searchlight activation.
  • Verify the working current (140mA with light on) to ensure sufficient power is supplied.
• Intermitterende signal:
  • Ensure there are no obstructions between the camera and the remote controller.
  • Check for potential 2.4GHz interference in your operating environment.
  • Inspect the MIPI cable for any damage.

7. Brugertips

No specific user tips are available at this time. For optimal performance, always ensure secure connections and operate within the specified voltage rækkevidde.

8. Garanti og support

For garantioplysninger, teknisk support eller serviceforespørgsler bedes du kontakte din oprindelige købssted eller producenten direkte. Gem din købskvittering som købsbevis.