Herdio HMA-BTB01 Bluetooth & Aux Mini Amplivligere

1. Produktet er slutview

The Herdio HMA-BTB01 is a compact Bluetooth audio amplifier designed to connect Bluetooth-enabled devices to low impedance speakers. It features a built-in power amplifier and an auxiliary input for wired connections. Its small size makes it suitable for installation in various spaces, including ceiling voids.

2. Pakkens indhold

Sørg for, at alle genstande er til stede og i god stand ved udpakning:

• 1 x Herdio HMA-BTB01 Bluetooth & Aux Mini Amplivligere
• 1 x 12V Power Supply Unit (PSU) with regional plug (EU/US/UK/AU plug, as selected)

3. Opsætningsvejledning

Follow these steps to set up your Herdio HMA-BTB01 amplivligere:

3.1 Placering

• Install the Bluetooth amplifier in a dry location, such as a loft space or within a wall cavity. Avoid areas with high humidity or direct exposure to water.

3.2 Ledningsdiagram

3.3 Tilslutning af højttalere

De amplifier supports up to 4 speakers (4 or 8 Ohms). Connect your passive speakers to the screw terminals:

• SPK L+ / SPK L-: For Left Channel Speaker
• SPK R+ / SPK R-: For Right Channel Speaker

3.4 Tilslutning af strøm

Connect the supplied 12V PSU to the 'Power Jack' input on the amplifier. Ensure the correct regional plug is used.

3.5 Hjælpeindgang

For wired audio sources, connect a 3.5mm audio cable from your device to the 'AUX IN' jack on the amplivligere.

3.6 TWS Switch

The TWS (True Wireless Sound) switch is located on the side of the amplifier. This switch is used when pairing two amplifiers together for a true stereo surround sound experience. Ensure the TWS switch is in the 'ON' position on both amplifiers before attempting to pair them.

4. Betjeningsvejledning

4.1 Bluetooth-forbindelse

Sådan forbinder du din enhed via Bluetooth:

1. Sørg for ampkøleren er tændt.
2. Søg efter tilgængelige Bluetooth-enheder på din Bluetooth-aktiverede enhed (smartphone, tablet osv.).
3. Select the device named "Herdio" from the list. No password is required for connection.
4. Once connected, audio from your device will play through the speakers.

The Bluetooth connection has a range of up to 50 feet (approximately 15 meters).

4.2 Auxiliary Input Usage

If you prefer a wired connection or your device does not have Bluetooth, connect it using a 3.5mm audio cable to the 'AUX IN' port. The amplifier will automatically switch to the auxiliary input when a signal is detected.

4.3 TWS (True Wireless Sound) Pairing

To achieve true stereo sound with two Herdio HMA-BTB01 amplivsstil:

1. Sørg for begge dele amplifiers are powered on and their TWS switches are set to 'ON'.
2. Pair your Bluetooth device to one of the ampløftere. Denne amplifier will act as the master unit.
3. De to amplifiers will automatically pair with each other, creating a stereo pair.

4.4 Kompatibilitet

The Herdio HMA-BTB01 amplifier is compatible with various devices, including Amazon Alexa and Echo products, allowing for seamless integration into smart home audio setups.

5. Vedligeholdelse

For at sikre din levetid og optimale ydeevne amplivligere:

• Keep the unit in a dry environment. Avoid exposure to moisture, rain, or extreme temperatures.
• Rengør ydersiden med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.

6. Fejlfinding

Ingen lydoutput:

• Tjek om amplifier is powered on and the power adapter is securely connected.
• Verify speaker connections are correct (SPK L+/-, SPK R+/-).
• Ensure your audio source (Bluetooth device or Aux cable) is properly connected and playing audio.
• Check the volume level on both your audio source and the amplivligere.

Problemer med Bluetooth-parring:

• Sørg for amplifier is within the 50-foot Bluetooth range of your device.
• Confirm the Bluetooth name "Herdio" appears on your device's scan list. No password is required.
• If using TWS, ensure both amplifiers have the TWS switch 'ON' before pairing your device to one of them.

Amplifier makes noise when Bluetooth disconnects:

• This is normal behavior. When a Bluetooth device disconnects, the amplifier may emit a sound as it enters a search mode for new connections.

7. Specifikationer

8. Brugertips

• For a true stereo experience, utilize the TWS function by pairing two Herdio amplifiers. Remember to turn on the TWS switch on both units before pairing.
• The Bluetooth connection does not require a password, simply select "Herdio" from your device's Bluetooth list.
• Sørg altid for amplifier is installed in a dry, well-ventilated area to prevent damage and ensure optimal performance.

9. Garanti og support

For any issues or support inquiries, please contact your retailer or the Herdio customer service. Keep your purchase receipt for warranty claims.