Deepcool TF120S

DEEPCOOL TF120S 120mm PWM CPU/kabinetkøleblæser instruktionsmanual

Model: TF120S

Indledning

The DEEPCOOL TF120S is a high-performance 120mm cooling fan designed for computer cases and CPU liquid coolers. It features a double-layer supercharged fan blade, PWM speed regulation, low noise and vibration absorption, and a long-life Hydro Bearing for reliable and efficient cooling. This manual provides essential information for the proper installation, operation, and maintenance of your TF120S fan.

DEEPCOOL TF120S Black and White fans

Figure 1: DEEPCOOL TF120S Fans (Black and White variants)

Pakkens indhold

Kontroller venligst, at alle varer er til stede i din pakke:

  • DEEPCOOL TF120S 120mm Fan
  • Monteringsskruer (8x)
  • Low-Speed Adapter (LSP) Cable
Low-Speed Adapter and mounting screws

Figure 2: Included Low-Speed Adapter (LSP) and Mounting Screws

Specifikationer

FeatureSpecifikation
Fan Dimensioner120 × 120 × 25 mm
Nettovægt167 g
Fan Speed (Standard)500 ~ 1800 RPM ±10 %
Fan Airflow (Standard)64.4 CFM
Fan Air Pressure (Standard)2.33 mmAq
Fan Noise (Standard)≤32.1 dB(A)
Fan Speed (with LSP)400 ~ 1500 RPM ±10 %
Fan Airflow (with LSP)37.1 CFM
Fan Air Pressure (with LSP)0.40 mmAq
Fan Noise (with LSP)≤25.9 dB(A)
Fan Connector4-benet PWM
Leje TypeHydro leje
Fan Rated Voltage12 VDC
Blæser nominel strøm0.15 A ±10 %
Ventilator strømforbrug1.8 W
Fanliv50,000 timer
Knivmængde9
Bruges tilSag
CertificeringCE, RoHS
OprindelseFastlandet Kina
Fan dimensions diagram

Figure 3: Fan Dimensions

Opsætning og installation

Follow these steps to properly install your DEEPCOOL TF120S fan:

  1. Prepare your System: Sluk din computer, og afbryd den fra strømkilden. Åbn computerens kabinet for at få adgang til monteringsstederne for ventilatoren.
  2. Identificér monteringssted: Determine where you want to install the fan (e.g., front intake, rear exhaust, top exhaust, or on a CPU liquid cooler radiator). Ensure the fan's airflow direction (usually indicated by arrows on the fan frame) matches your desired cooling configuration.
  3. Monter blæseren: Align the fan with the screw holes on your case or radiator. Use the provided mounting screws to secure the fan firmly. Do not overtighten the screws.
  4. Tilslut ventilatorkablet: The TF120S fan uses a 4-pin PWM connector. Locate an available 4-pin fan header on your motherboard. Common headers include 'CPU_FAN', 'CPU_OPT', or 'SYS_FAN'. Connect the fan's 4-pin cable to the chosen header.
  5. Optional Low-Speed Adapter (LSP): If you desire a quieter operation with reduced fan speed, you can connect the included Low-Speed Adapter cable between the fan and the motherboard header. This will limit the maximum fan speed and noise output.
PWM fan connection diagram

Figure 4: PWM Fan Connection Diagram (Fan to Motherboard Header)

Operation

The DEEPCOOL TF120S fan operates using Pulse Width Modulation (PWM) technology, allowing your motherboard or fan controller to dynamically adjust the fan speed based on system temperature. This ensures efficient cooling when needed and quieter operation during lighter loads.

  • Standarddrift: When connected directly to a 4-pin PWM header, the fan speed will range from 500 to 1800 RPM, providing an airflow of up to 64.4 CFM and an air pressure of 2.33 mmAq.
  • Low-Speed Operation (with LSP): If the Low-Speed Adapter is used, the fan speed will be limited to a range of 400 to 1500 RPM, resulting in reduced noise (≤25.9 dB(A)) and airflow (37.1 CFM) for a quieter computing experience.
Airflow through radiator diagram

Figure 5: Optimized airflow for strong performance, increasing radiator efficiency by an average of 10%.

Opretholdelse

Regular maintenance ensures optimal performance and longevity of your TF120S fan:

  • Rensning: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and disconnected before cleaning.
  • Leje: The TF120S utilizes a Hydro Bearing, which is designed for a long operational life of up to 50,000 hours and requires no lubrication or special maintenance.
  • Vibrationsabsorbering: The fan frame incorporates 8 rubber pads on the corners to absorb vibration and reduce noise. Ensure these pads are intact and properly seated during installation.
Durable Hydro Bearing diagram

Figure 6: Durable Hydro Bearing for extended trouble-free operation.

Shock absorption pads diagram

Figure 7: Shock absorption pads on the fan frame to reduce noise and vibration.

Fejlfinding

  • Ventilatoren drejer ikke:
    • Ensure the 4-pin PWM connector is securely plugged into the motherboard fan header.
    • Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly (e.g., not set to 'off' or a very low minimum speed).
    • Test the fan on a different fan header or with a known working fan controller if available.
  • Fan is Too Loud:
    • Verify if the Low-Speed Adapter (LSP) is installed. If not, consider installing it for reduced noise.
    • Adjust the fan curve settings in your motherboard's BIOS/UEFI or through fan control software (e.g., Fan Control, Argus Monitor) to lower fan speeds at idle or low temperatures.
    • Ensure no cables are obstructing the fan blades.
    • Check for dust buildup and clean the fan if necessary.
  • Dårlig køleydelse:
    • Confirm the fan is oriented correctly for optimal airflow (intake or exhaust) within your case.
    • Sørg for, at der ikke er nogen forhindringer, der blokerer luftstrømmen til eller fra ventilatoren.
    • If used on a radiator, ensure the radiator fins are clean and not clogged with dust.
    • Check your system's overall airflow configuration.

Brugertips

  • Optimal luftstrøm: For best cooling, ensure a balanced airflow within your PC case. Typically, front and bottom fans act as intake, while rear and top fans act as exhaust.
  • Fan Curve Customization: Utilize your motherboard's BIOS/UEFI or dedicated software to create custom fan curves. This allows you to fine-tune the fan speed to balance cooling performance and noise levels according to your preferences and system load.
  • Kabelstyring: Før ventilatorkablerne pænt for at forhindre, at de kommer i kontakt med ventilatorbladene eller blokerer luftstrømmen.

Garanti og support

For technical support, warranty claims, or further assistance with your DEEPCOOL TF120S fan, please contact Deepcool customer service or visit the official Deepcool webwebsted. Gem din købsbevis af garantihensyn.

Relaterede dokumenter - TF120S

Preview Installationsvejledning til DeepCool TF120S 4 X højtydende blæser
Installationsvejledning og produkt overview Til DeepCool TF120S, et 4 x 120 mm højtydende ventilatorsæt. Inkluderer komponentliste og samlevejledning.
Preview DeepCool RF120 3-i-1 RGB-blæsersæt: Installation og funktioner
En omfattende guide til DeepCool RF120 3-i-1 RGB-blæsersættet, der beskriver pakkens indhold, installationstrin og tilslutningsmuligheder for pc-byggere.
Preview Installationsvejledning til DeepCool Gammaxx GT A-RGB CPU-køler
En omfattende vejledning til installation af DeepCool Gammaxx GT A-RGB 120 mm Single Tower CPU-køler på Intel- og AMD-bundkort. Indeholder en liste over dele, trinvise instruktioner og tilslutningsdiagrammer.
Preview DeepCool RF120 RGB-blæserinstallation og produktoversigtview
En vejledning til installation og tilslutning af DeepCool RF120 RGB-blæsersættet. Detaljer om komponenter, monteringstrin og tilslutningsmuligheder for pc-byggere.
Preview DeepCool CC560 ARGB Mid-Tower ATX-kabinet brugermanual og installationsvejledning
Detaljeret brugermanual og installationsvejledning til DeepCool CC560 ARGB Mid-Tower ATX PC-kabinettet, der dækker funktioner, specifikationer, tilbehørsindhold og trinvise monteringsinstruktioner.
Preview DeepCool CG540-serien af ​​mid-tower ATX-kabinet: Installationsvejledning og specifikationer
Omfattende guide til DeepCool CG540-serien af ​​Mid-Tower ATX PC-kabinet, der dækker funktioner, specifikationer, dimensioner, kompatibilitet med radiatorer og blæsere samt detaljerede installationsvejledninger til komponenter.