Xhorse XK-seriens universelle ledningsfjernbetjening XKKF03EN VVDI fjernbetjening til bilnøgle brugermanual

1. Introduktion og overview

This manual provides detailed instructions for the Xhorse XK Series Universal Wire Remote Car Key, model XKKF03EN. This 3-button wired remote key is designed for use with Xhorse VVDI programming tools such as VVDI2, VVDI Mini Key Tool, and Key Tool Max. It serves as a universal solution for generating and cloning remote keys for various vehicle models.

Figure 1: Xhorse XK Series Universal Wire Remote XKKF03EN with circuit board components.

2. Produktfunktioner

• Modelnummer: XKKF03EN
• Knapper: 3 Buttons (Lock, Unlock, Trunk)
• Key Blade: Not included (requires separate purchase)
• Transponder Chip: Not included (requires separate purchase)
• Batteri: Not included (requires separate purchase, CR2032 type)
• R/C Function: Ja
• Tilpasning: Ingen
• Materiale: Plastic + Metal construction
• Kompatibilitet: Designed for use with Xhorse VVDI2, VVDI Mini Key Tool, and Key Tool Max.

Figur 2: Forside og bagside view of the Xhorse XK Series Universal Wire Remote XKKF03EN.

Figure 3: Disassembled Xhorse XK Series remote key showing internal circuit board and battery compartment.

3. Pakkens indhold

Når du åbner pakken, bør du finde følgende vare:

• 1 x Xhorse XK Series Universal Wire Remote Car Key (Model: XKKF03EN)

Figure 4: Packaging box for Xhorse Universal Remote.

4. Setup and Key Making Process

The XKKF03EN remote key requires several steps to become fully functional for a specific vehicle. This process typically involves generating the remote, generating/cloning a transponder chip, cutting a key blade, and final assembly/installation. You will need an Xhorse VVDI programming tool for most of these steps.

Figure 5: Xhorse Key Making Process Diagram.

1. Fjerngenerering:
   Using your Xhorse VVDI programming tool, connect the XKKF03EN circuit board to the device. Select the appropriate vehicle make and model to generate the remote key data onto the circuit board.
2. Batteri installation:
   Insert a CR2032 battery into the designated battery socket on the circuit board. Ensure correct polarity. (Note: Battery is not included and must be purchased separately).
3. Chip Generation / Transponder Editing & Cloning:
   If your vehicle requires a transponder chip for immobilizer functions, you will need to purchase a compatible transponder chip separately. Use your Xhorse VVDI tool to generate or clone the transponder data onto this chip.
4. Nøglebladsskæring:
   Purchase an uncut key blade compatible with your vehicle. Take the key blade to a professional locksmith or use a compatible key cutting machine to cut it according to your original vehicle key. (Note: Key blade is not included and must be purchased separately).
5. Montering og installation:
   Assemble the circuit board, battery, and cut key blade into the XKKF03EN key shell. Ensure all components fit securely. Once assembled, the key can be programmed to your vehicle using the Xhorse VVDI tool or a professional automotive locksmith.

5. Betjeningsvejledning

Once the XKKF03EN remote key is fully programmed and assembled, it functions as a standard 3-button remote for your vehicle.

• Låseknap: Tryk én gang for at låse alle bildøre.
• Lås op knap: Tryk én gang for at oplåse alle bildøre.
• Trunk knap: Press and hold (or press twice, depending on vehicle model) to open the vehicle's trunk or tailgate.

Refer to your vehicle's owner's manual for specific remote key operating procedures, as functionality may vary slightly between car models.

6. Vedligeholdelse

• Udskiftning af batteri: The remote uses a CR2032 coin cell battery. If the remote range decreases or it stops responding, replace the battery. To replace, carefully open the key shell (refer to Figure 3 for internal components), remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up.
• Rensning: Clean the key with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the plastic or metal components.
• Opbevaring: Store the key in a dry place, away from extreme temperatures and direct sunlight. Avoid dropping the key or exposing it to water.

7. Fejlfinding

If you encounter issues with your XKKF03EN remote key, consider the following:

• Fjernbetjeningen reagerer ikke: Check the battery. Ensure it is correctly installed and has sufficient charge. If the battery is new, re-check the remote generation and programming steps with your VVDI tool.
• Key Not Starting Vehicle: If the key turns in the ignition but the car does not start, the transponder chip may not be correctly programmed or installed. Revisit the chip generation/cloning process.
• Knapper virker ikke: This could indicate a programming issue or a faulty circuit board. Re-program the remote using your VVDI tool. If the issue persists, the circuit board may need replacement.
• Fysisk skade: Inspect the key for any visible damage. If the key shell is cracked or buttons are stuck, it may affect functionality.

For complex issues, it is recommended to consult a professional automotive locksmith or contact Xhorse technical support.

8. Specifikationer

9. Brugertips

• Universel anvendelse: This key is designed for universal use, meaning it can be programmed for a wide range of vehicles. However, it is crucial to ensure compatibility with your specific car model before proceeding with the key making process.
• Additional Purchases Required: Remember that the key blade, transponder chip, and CR2032 battery are NOT included with the XKKF03EN remote and must be purchased separately to complete the key assembly.
• Professionelle værktøjer: A professional Xhorse VVDI programming tool (VVDI2, VVDI Mini Key Tool, or Key Tool Max) is essential for generating the remote, programming the transponder, and linking the key to your vehicle.
• Søg eksperthjælp: If you are unfamiliar with key programming or cutting, it is highly recommended to seek assistance from a qualified automotive locksmith or a professional who specializes in Xhorse products.

10. Support og kontakt

For further assistance, technical support, or inquiries regarding your Xhorse XK Series Universal Wire Remote XKKF03EN, please contact your original point of purchase or refer to the official Xhorse webwebsted for supportressourcer.